On 2022-07-27 14:22, Lipski, Michael Victor wrote:
Sure, screenshot of flowgraph is included. GRC version is 3.8, UHD is
4.1.0.
The E310 is being used in networking mode for some very basic
testing. I have an E312 set up as to transmit a sine wave output
(USRP Sink), which is connected over
Hi Jameson,
I just tried this in a fresh environment with gnuradio 3.8.2 and python
3.8.13, and I was unable to reproduce the error. Maybe some of my
packages were newer than what you have. Can you try upgrading packages
to their latest versions? In other words, maybe you have an older build
Yes, there is a 30 dB attenuator before the splitter.
From: Discuss-gnuradio on
behalf of Marcus D. Leech
Sent: Wednesday, July 27, 2022 2:36 PM
To: discuss-gnuradio@gnu.org
Subject: Re: Receiving on two channels with E310/E312
On 2022-07-27 14:22, Lipski, Mich
On 2022-07-27 14:22, Lipski, Michael Victor wrote:
Sure, screenshot of flowgraph is included. GRC version is 3.8, UHD is
4.1.0.
The E310 is being used in networking mode for some very basic
testing. I have an E312 set up as to transmit a sine wave output
(USRP Sink), which is connected over
On 2022-07-27 13:40, Lipski, Michael Victor wrote:
I tried both options; "A:A A:B" was invalid; it seems to accept "A:0
A:1", except that it gives me the same error message: "Runtime Error:
port number 1 exceeds max of 0."
Everything works fine with a single receive channel. I have also
trie
I tried both options; "A:A A:B" was invalid; it seems to accept "A:0 A:1",
except that it gives me the same error message: "Runtime Error: port number 1
exceeds max of 0."
Everything works fine with a single receive channel. I have also tried
streaming a single receive channel from two differe
On 2022-07-27 12:04, Lipski, Michael Victor wrote:
Hello all,
I am running some simple tests with some E310/E312 radios and would
like to set one up to receive on two channels simultaneously. How
would I go about doing this using the UHD:USRP Source block? I have
no problem receiving on a s
Hello all,
I am running some simple tests with some E310/E312 radios and would like to set
one up to receive on two channels simultaneously. How would I go about doing
this using the UHD:USRP Source block? I have no problem receiving on a single
channel, but when I try to set up the block to
