Dear Marcus,
I a working under windows now. I have modified the the example
rx_samples_to_file.cpp by including the following lines
usrp-set_time_source(external);
usrp-set_time_unknown_pps(uhd::time_spec_t(0.0));
boost::this_thread::sleep(boost::posix_time::seconds(1));
for (size_t chan = 0;
Got it! The problem I sent before is now solved by exeplicity defining gain,
frequncy and rate for the three cheannles as follows:
usrp-set_rx_gain(gain,std::string(),0);
usrp-set_rx_gain(gain,std::string(),1);
usrp-set_rx_gain(gain,std::string(),2);
and similar lines for
Yes I am using the command: uhd::usrp::multi_usrp::make(args) passing the IP
addresses of the three N200 boards. Moreover I check the boards synch using
usrp-get_time_synchronized () which returns true but still the sinusoids are
not temporally alligned. A colleague raised an arguement the even
that warning occurred, just to
help check things for consistency?
Thanks,
Marcus Müller
Am 02.05.2013 10:42, schrieb Zooz Engineer:
However, I have some 27 warnings in MSVC and I don't know how important
they are:
C4244: '=' : conversion from 'double' to 'uint32_t', possible loss of data
Subject: Re: Error in Building UHD on Windows
On 04/25/2013 03:27 PM, Zooz Engineer wrote:
Dear All,
I am trying to install UHD on windows from source code. I have
installed the prerequisites:
cmake-2.8.10.2-win32-x86 boost_1_51_setup32 python-2.6.6
Cheetah-2.2.2
by replacing the cvtres.exe from VS2010 with the one from
VS2012.
Best,
Zo
Date: Thu, 25 Apr 2013 14:54:37 -0700
From: ml-node+s4n41007...@n7.nabble.com
To: xtmpcvs...@hotmail.com
Subject: Re: Error in Building UHD on Windows
On 04/25/2013 03:27 PM, Zooz Engineer wrote
Dear All,
I am working on USRP N200 and sometimes I access them through a remote desktop.
However, when a problem happens and I need to power cycle the boards, I have to
do that physically. Is there any method that I can execute a program or a
command to power cycle the boards?
Thanks,
Dear All,
I am trying to install UHD on windows from source code. I have installed the
prerequisites:
cmake-2.8.10.2-win32-x86
boost_1_51_setup32
python-2.6.6
Cheetah-2.2.2.win32-py2.6
msysGit-fullinstall-1.8.1.2-preview20130201
Visual studio 2010 express
I follwowed the steps detailed
I think I am missing something in the build variables. What are the variables
that need to be set?
Cheers,
Zo
From: xtmpcvs...@hotmail.com
To: discuss-gnuradio@gnu.org
Subject: Error in Building UHD on Windows
Date: Thu, 25 Apr 2013 20:27:38 +
Dear All,
I am trying to install UHD on
Dear All,
My aim at the timebeing is to synchronously record some data from 3 USRP-N200
for offline processing I wonder if the provided example rx_samples_to_file.py
works for multiple USRPs with external Ref/PPS.
Does anybody have an expereince with this example and wants to share it? I
) to see if the apparent phase differences follow particular
cables/signal paths?
On Apr 3, 2013, at 2:32 AM, Zooz Engineer xtmpcvs...@hotmail.com wrote:Hi
Marcus,
Thanks for replying. I did the following test after your comments:
1- to rule out the scope sink problem, I used a file sink
Hi Marcus,
Thanks for replying. I did the following test after your comments:
1- to rule out the scope sink problem, I used a file sink and plotted the
output using octave: Same results observed.
2- I took the outputs of the splitters to the oscilloscope and there are
aligned.
Are there
Dear All,
I have purchased 3 USRPs (N200) and set them up. I am intending to implement a
satellite receiver by connecting a board to the output of an LNB (satellite
dish). I am using the daughterboard DBSRX2 and I need to used a symbol rate of
27.5 MSps ( compliant to the standard). For
13 matches
Mail list logo
