Hi Damindra!
Ha, you're more than welcome!
Sorry, I don't have a good reference more than the example tx_ofdm.grc
and rx_ofdm.grc, the doxygen documentation to the blocks used therein
and their source code, if you care for implementation details.
Best regards,
Marcus
On 14.12.2016 01:09,
Dear Marcus,
Thank you very much for being patient with me and answering all my
questions. I have one last question. Is there a good reference you could
recommend me to read, to understand how the current GNURadio OFDM
implementation works?
Best regards,
Damindra
On Tue, Dec 13, 2016 at 6:10
Hi Damindra
On 13.12.2016 23:42, Damindra Bandara wrote:
> Dear Marcus,
>
> Thank you for your suggestion. However, according to my use case, I
> cannot do multiple transmissions at a higher layer.
>
I kind of doubt that - you're writing your own OFDM transceiver right
now, and thus you're the
Dear Marcus,
Thank you for your suggestion. However, according to my use case, I cannot
do multiple transmissions at a higher layer.
I have few questions about the "OFDM Carrier Allocator."
1- Can current "OFDM Carrier Allocator" support multiple streams using
multiple channels, or you
Dear Damindra,
To me, that sounds like a higher-level problem – ie. you can send
whatever you want across your OFDM link, and that includes e.g. ethernet
or IP packets with different destinations; that would make things more
flexible – you wouldn't have to statically assign a set of carriers to a
Dear Marcus,
Thank you for your response.
My objective is to send multiple streams of data. For example a transmitter
to use two different streams to talk to two receivers. I was thinking
something similar to Frequency Division Multiplexing, where each stream is
represented using a different sub
We'll have to discuss what you mean with "channels" – do you mean
separate OFDM *signals*, or do you mean multiple *streams of data*?
Best regards,
Marcus
On 12/12/2016 08:09 PM, Damindra Bandara wrote:
> Dear Tom and Marcus,
>
> Thank you very much for pointing me to OFDM example. I was able
Dear Tom and Marcus,
Thank you very much for pointing me to OFDM example. I was able to use that
example and accurately transmit and receive files using X310 USRPS. I have
a follow-up question.
How can I modify these flow graphs to transmit multiple channels(that is
transmitter talking to
Dear Marcus,
Sorry, but for some reason I did not received this message from Tom and
also missed it in the GNURadio thread. I will check it and see whether it
will solve my problem.
Thanks,
Damindra
On Tue, Dec 6, 2016 at 6:08 PM, Marcus Müller
wrote:
> Hi Damindra,
Hi Damindra,
I'm a bit confused; you asked exactly this question[1] a while back and
got this answer:
> Please see this page:
>
> http://gnuradio.org/doc/doxygen/page_packet_data.html
>
> Tom
>
Now, we know that this is an important topic and that there's loads of
stuff to do about the
Hi,
I have noticed that packet encoder and decoder blocks are deprecated in
latest GNURadio version. I appreciate if someone could let me know what are
the replacement blocks for them.
Thank you,
Damindra
--
Damindra Savithri Bandara,
Ph.D. in Information Technology (Candidate)
George Mason
On Wed, Oct 5, 2016 at 6:50 PM, Martin Braun wrote:
> Do you just need *any* packet encoder/decoder?
>
> M
>
> On 10/04/2016 09:40 AM, Damindra Bandara wrote:
> > Hi,
> >
> > I have a flowgraph that uses packet encoder at the transmitter end and a
> > decoder at the
Do you just need *any* packet encoder/decoder?
M
On 10/04/2016 09:40 AM, Damindra Bandara wrote:
> Hi,
>
> I have a flowgraph that uses packet encoder at the transmitter end and a
> decoder at the receiver end. I updated GNURadio to the latest version
> and saw that the packet encoder/decoder
13 matches
Mail list logo