Hi Josh,
Thanks a lot for the reply. The thing is, I was able to run the
benchmark_rx.py and benchmark_tx.py codes in another UHD upgraded
daughterboard. That daughter-board module is XCVR2450 transceiver.
Unfortunately, I could not run the benchmark programs in the FLEX-400
daughterboard
On 10/04/2011 10:02 PM, Nazmul Islam wrote:
Hello,
I am trying to use the old gnuradio python programs in a USRP2
daughterboard. I am facing the unable to find USRP [0] problem. I know
that questions regarding this problem have appeared before. However, I am
still posting my problem since
Hello,
I am trying to use the old gnuradio python programs in a USRP2
daughterboard. I am facing the unable to find USRP [0] problem. I know
that questions regarding this problem have appeared before. However, I am
still posting my problem since it is probably occurring due to the
compatibility
Hi
Can anyone please help me? I am using gnuradio3.1.3.
When I try to run usrp_benchmark_usb.py, I get the a RuntimeError:
Unable to find USRP #0.
When I issue
ls -lR /dev/bus/usb | grep usrp,
I didn't get any message.
This is the first time that I connect USRP board to PC.
Please help me.
On Mon, May 18, 2009 at 4:28 AM, Teodora Petrovic li...@ruby-forum.com wrote:
Can anyone please help me? I am using gnuradio3.1.3.
When I try to run usrp_benchmark_usb.py, I get the a RuntimeError:
Unable to find USRP #0.
When I issue
ls -lR /dev/bus/usb | grep usrp,
I didn't get any
On Wed, Dec 12, 2007 at 04:58:36PM -0500, [EMAIL PROTECTED] wrote:
I installed kernel of 2.6.24-rc4-gd7f0b481 for Fedora 7 in PS3 following
http://www.gnuradio.org/trac/wiki/PS3FC7Install.
The linux system runs well. Then I installed GNU radio as told in above URL.
Everything went well too.
I installed kernel of 2.6.24-rc4-gd7f0b481 for Fedora 7 in PS3 following
http://www.gnuradio.org/trac/wiki/PS3FC7Install.
The linux system runs well. Then I installed GNU radio as told in above URL.
Everything went well too. However, I could not get USRP work. I am not sure
whether it is because
You require USB2.0 and not USB 1.1. USB 1.1 is not supported
On 7/26/07, hacper [EMAIL PROTECTED] wrote:
Dear all:
I am trying to run seom example codes on USRP. My computer equipes USB 1.1.
I use Fedora Core 7 + python 2.5 + gnuradio 3.0.3 to bulid the GNU Radio.
I had followed
Dear all:
I am trying to run seom example codes on USRP. My computer equipes USB 1.1. I
use Fedora Core 7 + python 2.5 + gnuradio 3.0.3 to bulid the GNU Radio. I had
followed http://gnuradio.org/trac/wiki/BuildGuide to bulid the GNU Radio.
However, when I run tunnel.py to build physical
, Unable to find USRP #%d % (which,)
RuntimeError: Unable to find USRP #0
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
10 matches
Mail list logo