On Sat, May 17, 2014 at 9:53 PM, Tom Rondeau wrote:
> So, yes and no on that. There's the information theoretic concept of
> sample rate, which is what you are talking about here. But underneath, we
> normalize all sample rates relative to 1. So it's the number of samples
> relative to that which
On Sat, May 17, 2014 at 2:38 AM, Activecat wrote:
> On Fri, May 16, 2014 at 2:01 AM, Marcus Leech wrote:
>
>> Gnu Radio is a streaming architecture. Sample-rate is actually
>> almost-entirely meaningless within the flowgraph, and only really
>> has meaning "at the edges" when interfacing to th
On Fri, May 16, 2014 at 2:01 AM, Marcus Leech wrote:
> Gnu Radio is a streaming architecture. Sample-rate is actually
> almost-entirely meaningless within the flowgraph, and only really
> has meaning "at the edges" when interfacing to the real world. The only
> exception is the throttle block,
Gnu Radio is a streaming architecture. Sample-rate is actually almost-entirely meaningless within the flowgraph, and only really
has meaning "at the edges" when interfacing to the real world. The only exception is the throttle block, and even it doesn't
produce *precise* sample-rates.
For th
Regarding the low sample rate, I have had this issue too when decimating to
narrow bandwidths. I assume sample rate is an integer for most blocks
therefore one can't go below 1 samp/sec?
Lou
KD4HSO
--
View this message in context:
http://gnuradio.4.n7.nabble.com/low-frequency-in-GRC-tp48237p
Actually i think the problem is that i have very low sample rate according
to the 1024 FFT..
On Thu, May 15, 2014 at 7:38 PM, jason sam wrote:
>
>
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discus
If you attach your GRC flowgraph I'll take a look at it for you.
Mike
--
Mike Jameson M0MIK BSc MIET
Ettus Research Technical Support
Email: supp...@ettus.com
Web: http://ettus.com
On Thu, May 15, 2014 at 10:06 AM, jason sam wrote:
> I am using GNU Radio Companion 3.7.3...when i set the frequ
I am using GNU Radio Companion 3.7.3...when i set the frequency of my
signal source to low values(in Hz or kHz),i get no signal on my scope or
fft sink??
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/dis
