Well, I was not me how played with the EEPROM. I found it like that
What I've just done is to set the hardware and subnet with the commands:
itupac@itupac:/usr/local/lib/uhd/utils$ ./usrp_burn_mb_eeprom --args
"addr=192.168.10.3" --values="hardware=2576"
itupac@itupac:/usr/local/lib/uhd/utils$ ./
On 2021-10-22 2:53 p.m., isaac mario tupac davila wrote:
Hi!
This is what appears:
itupac@itupac:/usr/local/lib/uhd/utils$ ./usrp_burn_mb_eeprom --args
"addr=192.168.10.3" --read-all
Creating USRP device from address: addr=192.168.10.3
[INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501;
Hi!
This is what appears:
itupac@itupac:/usr/local/lib/uhd/utils$ ./usrp_burn_mb_eeprom --args
"addr=192.168.10.3" --read-all
Creating USRP device from address: addr=192.168.10.3
[INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501;
UHD_3.14.0.HEAD-0-g6875d061
[INFO] [USRP2] Opening a USRP2/N-
On 2021-10-22 11:33 a.m., isaac mario tupac davila wrote:
Using Device: Single USRP:
Device: USRP2 / N-Series Device
Mboard 0: N???
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: BasicRX (AB)
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: Unknown (0x) - 0
I
Hi Marcus
The voltage level of my PPS is 5.04V,from a trimble thunderbolt.
This is the complete output log when I run test_pps_input.
itupac@itupac:~/workarea-uhd/uhd/host/build/examples$ ./test_pps_input
--source external
[INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501;
UHD_3.14.0.HEAD-
On 2021-10-20 4:19 p.m., isaac mario tupac davila wrote:
Hi Marcus
Curiosity and quickness possessed me. I tried first to burn it with
the usrp_n210_r4_fpga.bit as I have a N210 but it failed. Later, I
could burn it with the usrp_n200_r4_fpga.bit. I changed the Ip and
installed the usrp_n200_
Hi Marcus
Curiosity and quickness possessed me. I tried first to burn it with the
usrp_n210_r4_fpga.bit as I have a N210 but it failed. Later, I could burn
it with the usrp_n200_r4_fpga.bit. I changed the Ip and installed the
usrp_n200_fw.bin and usrp_n200_r4_fpga.bin. It could recognize it. My
On 2021-10-15 5:57 p.m., isaac mario tupac davila wrote:
Hello
I'm Isaac. I have a tricky thing here instaling images. I have a USRP
N210 with FW Version: 12.1 FPGA Version: 10.0. When I prove the pps
test, it says: No PPS detected within the time interval. I believe it
is for the FPGA image(
Hello
I'm Isaac. I have a tricky thing here instaling images. I have a USRP N210
with FW Version: 12.1 FPGA Version: 10.0. When I prove the pps test, it
says: No PPS detected within the time interval. I believe it is for the
FPGA image(v10). So I tried to update the image and firmware doing:
./uhd