On 10/03/2015 22:29, Tim wrote:
*The reason I am doing this is that these terminal are Linux based and
they have a built in RDP client, I am having issue with running RDP on
my PC so I was hoping to glean some info from one of these terminals.
In case it is relevant, I have been using Remmina
I find newer Windows systems will only work with xfreerdp instead of the
rdesktop ( http://www.rdesktop.org/ ) program I've always used, unless you
specifically modify their security settings.
On 11 March 2015 at 15:13, Andrew wrote:
> On 10/03/2015 22:29, Tim wrote:
>
>> *The reason I am doing
On 10/03/15 13:37, Ralph Corderoy wrote:
Hi Tim,
Andrew wrote:
Tim wrote:
Number Start End Size Type File system Flags
1 32.3kB 1021MB 1021MB primary boot
You can avoid those awkward units, by getting it in bytes, with
sudo parte
On 10/03/15 13:37, Ralph Corderoy wrote:
Hi Tim,
Andrew wrote:
Tim wrote:
Number Start End Size Type File system Flags
1 32.3kB 1021MB 1021MB primary boot
You can avoid those awkward units, by getting it in bytes, with
sudo parte
Hi Tim,
> > After attempting to mount it, have a look at the end of dmesg(1)'s
> > output for any information from the kernel filesystem modules about
> > what they did or didn't like.
>
> Strangely my system does not have a dmesg log file, I had a good
> search (looked in the normal /var/log/ ) b
Hi Tim,
Andrew wrote:
> Tim wrote:
> > Number Start End Size Type File system Flags
> > 1 32.3kB 1021MB 1021MB primary boot
You can avoid those awkward units, by getting it in bytes, with
sudo parted /dev/sdd unit B print
That then gi
'file' seems to work on here, but you need to add '-s' to use it on
special files.
'sudo file -s /dev/sdd*' works here to tell me that I have an x86 boot
sector on /dev/sdd and an ext4 filesystem on /dev/sdd1. Adding '-k'
shows more information.
--
Andrew.
--
Next meeting: Bournemouth,
Is it definitely Linux? It's not BSD and a UFS file system is it?
I can't remember but if you point "file" at a block device does it attempt
to guess the FS?
On Monday, 9 March 2015, Tim wrote:
> I have a Linux based thin terminal which uses a 1gb Compact Flash card as
> a hard disk. I want to
I have a Linux based thin terminal which uses a 1gb Compact Flash card
as a hard disk. I want to look at the software on the compact flash card
but the file type is not recognised
Model: Generic USB CF Reader (scsi)
Disk /dev/sdd: 1021MB
Sector size (logical/physical): 512B/512B
Partition Table
9 matches
Mail list logo
