"Philip M. Roberts" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
The meter on my WV-4 is broken. Does anyone know where I can buy a meter.
Maybe it will be easier to buy a whole unit.
Thanks for reading this.
Ph
"Mike Williams" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Well,
I replaced U9013 on the DR-7 Board and it has now been running for 7 hours
without a blip. U9013 was the culprit (thermal intermittent) on the D
"Dick Harms PA2DW" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Hi Garey,
I found it a bit hard to explain it, but the way you describe it is exactly
what I mean! We are definitely hearing "the other side". Stra
Garey Barrell <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Dick -
If you are saying what I think you're saying, the ultimate rejection of
all the filters is specified as greater than 100 dB. IF the passband
tun
Hi all,
Yesterday I worked on the TR7 of Evert/PA2KW who had a loss of 20
dB of receiver gain. It appeared that the J310 on the second filter PWB did not
get its supply, because the 47 Ohm resistor in the drain was "cracked". Hard to
see, but easy to measure...
After we but back the TR7 i
Hello,
I'm in the middle of removing the front panel from
a Drake 2B. Everything is off except the Pass band selector switch (the
pointer for .5, 2.1 and 3.6 khZ). I cannot see anyway to remove it to remove
the pointer short of the completely disassembling the passband assemby.
That is
richard radke <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Morning Guys,
Anybody on the list have any experience running a gas powered AC
generator on a boat?...A buddy and I are putting a /mm field day
operatio
Hi Folks
As I recover from back surgery. I am trying to
revive my newly purchased TR-3 rig.
I am getting no frequency output from the PTO. The
6AU6 tube seems ok. I am new at this and am checking Resistance and Voltage. Any
help on the best way to check for problems with the PTO would be
a
8 matches
Mail list logo
