Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Dan -
All original cables were 38" long tip-to-tip.
The INJ cable used a foam inner dielectric and phono connectors with a
white insulation. This ca
"James Chaggaris" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Gary:
It is my understanding that Drake changed the mic configuration on the TR7's
above serial #1500. Also, I think the impedance is around 75
"Chuck Santose" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
I'm new to this list and looking for links or other information on the Drake
R8A receiver. Web seems pretty sparse as far as info is concerned. Are
n7ioh <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Hi Dan, I still have a good supply of the Belden 8421
cable left. I am selling it by the inch, 10 cents an
inch which is $1.20 a foot. This is less then what
A
>>> After a trip to Radio Shack to get some contact cleaner to do all the
>>> controls and tubes, I'll let you all know how it came out.
BE CAREFUL!You can cause serious problems by "dousing" the underside of the
chassis with contact cleaner!
See
http://www.wb4hfn.com/DRAKE/DrakeArticles/
What is RG75? what are its characteristics? The only RG-75 I know of was a type
of rectangular waveguide for microwave. There must be another factor causing
your problem. Please don't take this personally as I've experienced all the
problems I'm about to list. Poor soldering, inner conductor sho
Congrats on the successful project Bill: keep those Drake's glowing!
Mike W4DL
- Original Message -
From: Bill Jackson
To: drakelist@www.zerobeat.net
Sent: Tuesday, December 05, 2006 7:02 AM
Subject: Re: [drakelist] Thanks for TR4C repair replies
>>> After a trip to Radio
Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Jim -
There is a 470k resistor connected between Pin 1 and Pin 4 on the back
of the Mic connector. The D-104 with amp will drive either one by
adjus
"Jim Shorney" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
On Mon, 4 Dec 2006 19:48:52 -0600, [EMAIL PROTECTED] wrote:
>Sorry if this is a repost, but I want to interface my "amplified" D-104 with
>a TR7. I ha
Thom R LaCosta <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
On Sun, 3 Dec 2006, john wrote:
At 06:44 PM 12/1/2006, Thom R LaCosta wrote:
On Fri, 1 Dec 2006, john wrote:
-
Doug Smith <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
On Sun, 2006-12-03 at 22:32, David Abbott wrote:
> Good evening, I have another problem with my twins -- R4C not muting when I
> key my mic.
Sorry for the
C & T Dorn <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
I have an "extra" SPR-4 for sale. In excellent shape. Asking $250 plus
freight. E-mail if interested.
Thanks,
Chris VE6RDC
-
There is a great Drake site ..when you need parts or information try it
outRon (WB4HFN) does a lot of work to keep it up to date..
It has the answers for a lot of the questions that are ask for here...Go there
and look you may learn something about Drake's..Its there USE IT...
WEBSITE.. h
[EMAIL PROTECTED] made an utterance to the drakelist gang
--
Sorry if this is a repost, but I want to interface my "amplified" D-104 with
a TR7. I have seen reports in the past of doing this both "as-is" and in
addition, using
Wow!
After posting a request for help, there were TEN replies in my inbox, the
NEXT day! You folks must be hams from the 60's - what a great response! It
really felt like a community had responded, all at once. Thanks to all of
you for your good suggestions and comments One of you even sent
Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Yeah, RG-75 IS a waveguide. I just assumed transposition somewhere
along the line. Not that it ever happens to me!! :-)
73, Garey - K4OAH
Atlanta
Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Frank -
The primary reason the amplifier was installed in the base of the D-104
microphone was to isolate the crystal/ceramic mic cartridge from varyi
Jerry Harley <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
How about a TR4 for sale $120. Here is what I know about it:
Appearance very nice
Rx - right up there with my rice boxes
Tx - only a couple of Watts on
What are others using as an INJ cable for the R4x-T4x combos?
I know that Drake provided such a beast "'back in the day," that Belden 8421
works well, and that there are a least a couple of RG type cables that do,
also. But where do you get it??? I don't really need 250 feet to make one
38" ca
"Ken Winterling" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Dave,
Check the function switch on the R-4C. Be sure it is in the "EXT.
MUTE" position. That position allows the transmitter to mute the
receiver d
20 matches
Mail list logo