Hello to the group,
Question one.
It appears that if one pulls the plastic end caps from the front panel, has
the top cover and bottom panel removed, have the DR7 board out, then
pulls two of the three screws on each side that the front panel will pull open
like a horizontal hinge..do
Hi Carl,
On Sat, 2 Jan 2010 12:26:56 EST, gypsym...@aol.com wrote:
It appears that if one pulls the plastic end caps from the front panel, has
the top cover and bottom panel removed, have the DR7 board out, then
pulls two of the three screws on each side that the front panel will pull
open
Greetings,
I am in need of some tubes for my TR-4. Can anyone recommend a good vendor?
Thanks
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
James -
In no particular order ...
http://www.esrcvacuumtubes.com/
http://www.tubesandmore.com/
http://www.vacuumtubes.net/
http://www.vacuumtubes.com/
http://tubes_tubes_tubes.tripod.com/tubestubestubes/index.html
Specify Sylvania, RCA, or GE for best results.
73, Garey - K4OAH
Glen
Working my way through the pile.
I came upon a R4B that does not quite work right. before I dig into
this receiver, i have a question
according to the manual, V1, A 6BZ6 is the RF amplifier
my radio has the expensive 6HS6 in place of the 6BZ6.
Is this a okay substitute ? Or do I need to
Mike -
The 6HS6 was a popular hop-up for some of the Heath receivers in the
late 60's. It makes a receiver seem hotter, because it is a Sharp
Cutoff pentode while the 6BZ6 is a more appropriate Semi-Remote
Cutoff pentode. This changes the AVC characteristics, making the
S-Meter read
6 matches
Mail list logo