How do I list a request for a part needed.
Ken George / K3JWI
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Ken -
What you just did, except tell us what part you need! :-)
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 4-B, C-Line TR-4/C Service Supplement CDs
www.k4oah.com
k...@proaudiogroup.com wrote:
How do I list a request for a part needed.
Ken George / K3JWI
Hello to all;
I'm needing the plate voltage, grid current, forward reflected power
multi meter for a L7 amp I have restored.
Hope someone has a suggestion where to look.
73's Ken / K3JWI
k...@proaudiogroup.com
423 645 5193
___
Drakelist mailing
Just like you did this question...post away!
John K5MO
At 04:28 PM 3/20/2010, k...@proaudiogroup.com wrote:
How do I list a request for a part needed.
Ken George / K3JWI
___
Drakelist mailing list
Drakelist@zerobeat.net
Hi Folks,
I am testing my T-4XB. Before going in the air, I wanted to check my
modulation first. Using different high impedance microphones I
transmitted into a dummy load and listened to the receiver without
antenna. I found that the LSB has a different modulation compared to
the USB. The USB
Frank -
Start with the Carrier Oscillator, Filter Match Balanced Modulator
alignment in Section VII, Section B. The idea is to get the Carrier
Oscillator centered in the valley between the two filters as shown at
0 on Page 37.
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 4-B, C-Line
6 matches
Mail list logo