Re: [Drakelist] New (to me) B Line...

Bill, Your dial.  There was an article in QST about using a good one to copy the print to a CD blank (like the ones on top of a CD stack).  I know the author was not Garey Barrell, but he I think he may have had the original idea. Caveats Garey? Just and idea. If you're like me sometimes

[Drakelist] AM filter for R4C wanted...

Dear all, I am looking for a AM filter for my Drake R4C; I would be happy with both the 4 kHz or the 6 kHz filter, doesn't matter if original or not. If someone wants to depart from his/her filter and is willing to ship to Italy, I will be pleased to get in touch. I can pay via Paypal. 73,

[Drakelist] T-4XC Plate Current

Is it normal for the T-4XC plate current to read 120 mA when: 1. in CW mode 2. Xmitter is keyed using mic line (no mic element connected, just foot switch). I have adjusted the bias per the manual at the mark on the meter. If not normal, any ideas as to what the issue may be? Thanks

[Drakelist] T-4XC on 160 Meters

When tuning the T-4XC on 160 meters, into a dummy load, the load control is at zero or maximum capacitance. I clearly do not get a peak in output power when changing the load control, the Pout continue to increase until I hit zero on the dial (max. cap). The plate control clearly has a peak at

Re: [Drakelist] T-4XC Plate Current

Do you have a key plugged, and 'open'? Will the current 'dip' with the PLATE control? Is GAIN control at CCW? 73, Garey - K4OAH Glen Allen, VA Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line and TR-4/C Service Supplement CDs www.k4oah.com Jim Bo wrote: Is it normal for the T-4XC plate current to

[Drakelist] L-7 Amp Soft Start.

Has anyone on here installed a Harbach SS-400 type Soft Start kit in their L-7? (This is the kit with the single relay and single dropping resistor and not the one used in a Heath SB-220). I know the SS-400 was made to install in a L-4B amp. I have not really studied the room requirements,