On Wed, 4 Mar 2020, Robert Altnoeder wrote:
> On 3/4/20 4:09 PM, Holger Kiehl wrote:
> > But this is not in the kernel since is is stuck at 8.4.11. So we will try it
> > with kernel module from the 9.x source.
>
> DRBD 9.0.x is not yet upstreamed, but the source is availab
On Tue, 3 Mar 2020, Robert Altnoeder wrote:
> On 2/28/20 8:54 PM, Holger Kiehl wrote:
> > [...]
> >kernel: drbd r0: conn( Unconnected -> WFConnection )
> >kernel: drbd r0: sock_create_kern failed, err = -97
> >kernel: drbd r0: conn( WFConnection -&g
Hello,
I am trying to setup a system with DRBD over Infiniband (sdp) and see the
following message when doing 'drbdadm connect r0':
kernel: drbd r0: conn( StandAlone -> Unconnected )
kernel: drbd r0: Starting receiver thread (from drbd_w_r0 [38537])
kernel: drbd r0: receiver
Hello,
I have megaraid controller with only SAS SSD's attached which always
sets /sys/block/sdb/queue/rotational to 1. So, in /etc/rc.d/rc.local
I just did a 'echo -n 0 > /sys/block/sdb/queue/rotational', that fixed
it. But after a 'systemctl start drbd' this value gets reset back to
1. Any idea
Hello,
thank you for helping, I will try without the g200 driver. Sorry for
the false alarm!
Tahnks,
Holger
On Mon, 17 Sep 2012, Lars Ellenberg wrote:
On Fri, Sep 14, 2012 at 11:00:35AM +, Holger Kiehl wrote:
Hello,
Got the following error situation where I do not know why it happened
Hello,
first sorry for the delay, it was weekend :-)
On Fri, 25 Mar 2011, Lars Ellenberg wrote:
On Fri, Mar 25, 2011 at 11:27:59AM +, Holger Kiehl wrote:
On Fri, 25 Mar 2011, Lars Ellenberg wrote:
On Fri, Mar 25, 2011 at 09:07:32AM +, Holger Kiehl wrote:
Hello,
On Mon, 10 Jan
Hello,
On Mon, 10 Jan 2011, Holger Kiehl wrote:
Hello,
upgrading kernel on secondary from 2.6.36.2 to 2.6.37 gives me the
following error on primary:
Jan 10 12:41:57 obelix kernel: block drbd0: BAD! BarrierAck #2350363662
received, expected #2350363661!
Jan 10 12:41:57 obelix kernel
On Fri, 25 Mar 2011, Lars Ellenberg wrote:
On Fri, Mar 25, 2011 at 09:07:32AM +, Holger Kiehl wrote:
Hello,
On Mon, 10 Jan 2011, Holger Kiehl wrote:
Hello,
upgrading kernel on secondary from 2.6.36.2 to 2.6.37 gives me the
following error on primary:
Which means you are using
Hello,
upgrading kernel on secondary from 2.6.36.2 to 2.6.37 gives me the
following error on primary:
Jan 10 12:41:57 obelix kernel: block drbd0: BAD! BarrierAck #2350363662
received, expected #2350363661!
Jan 10 12:41:57 obelix kernel: block drbd0: peer( Secondary - Unknown ) conn(
