Adding dri-devel.
This might need a bisect to work out where it went wrong,
Dave.
On Tue, Apr 28, 2020 at 7:48 AM Cary Garrett wrote:
>
> Hello,
>
> System won't go into suspend state after migrating to V5.6.7 kernel. Working
> in V5.5.10.
>
> Journal showing following:
>
> Apr 27 16:07:54 ker
Thanks Rob for reviews.
We are using Display Port Controller block to detect hot plug.
So we won't be using that pin as GPIO.
I found now that we don't need any bindings for that pin in such case.
So I am abandoning this patch series and upload new patch.
Thanks.
On 2020-04-15 08:24, Rob Herri
While we support using both tx slots for sideband transmissions, it
appears that DisplayPort devices in the field didn't end up doing a very
good job of supporting it. From section 5.2.1 of the DP 2.0
specification:
There are MST Sink/Branch devices in the field that do not handle
interleaved
On Mon, 27 Apr 2020 16:00:33 +0200, Angelo Ribeiro wrote:
> Add dt-bindings for Synopsys DesignWare MIPI DSI Host and VPG (Video
> Pattern Generator) support in the IPK display subsystem.
>
> The Synopsys DesignWare IPK display video pipeline is composed by a DSI
> controller (snps,dw-ipk-dsi) and
Because this patch will likely end up fixing a lot of MST issues we
either don't know about, or weren't able to figure out a fix for before,
I definitely want to make sure this patch gets cc'd to stable as well.
It doesn't apply cleanly to drm-misc-fixes, so here's a backported
version that does.
On Mon, 27 Apr 2020 09:21:48 +0100, Gareth Williams wrote:
> Add the DT bindings information for the Digital Blocks DB9000 LCD
> controller. Also include documentation for the Renesas RZN1 specific
> compatible string.
>
> Signed-off-by: Gareth Williams
> ---
> .../devicetree/bindings/display/db
On Fri, 24 Apr 2020 17:34:08 +0200, Maxime Ripard wrote:
> The BCM283x SoCs have a display pipeline composed of several controllers
> with device tree bindings that are supported by Linux.
>
> Now that we have the DT validation in place, let's split into separate
> files and convert the device tre
.yaml files can contain maintainer/author addresses and it seems
unlikely or unnecessary that individual MAINTAINER file section
entries for each .yaml file will be created.
So add the email addresses found in .yaml files to the default
get_maintainer output.
The email addresses are marked with "
On Mon, Apr 27, 2020 at 1:05 PM Peter Collingbourne wrote:
>
> Render nodes are not just useful for devices supporting GPU hardware
> acceleration. Even on devices that only support dumb frame buffers,
> they are useful in situations where composition (using software
> rasterization) and KMS are d
Hi Andrew.
> The patch assumes that we have
>
> - if ($file_emails) {
> - my @poss_addr = $text =~ m$[A-Za-z_-_\"\'
> \,\.\+-]*\s*[\,]*\s*[\(\<\{]{0,1}[A-Za-z0-9_\.\+-]+\@[A-Za-z0-9\.-]+\.[A-Za-z0-9]+[\)\>\}]{0,1}$g;
> - push(@file_emails, clean_file_emails(@poss_
On Mon, 2020-04-27 at 13:04 -0700, Andrew Morton wrote:
> On Sun, 26 Apr 2020 23:33:02 -0700 Joe Perches wrote:
>
> > On Mon, 2020-04-27 at 07:57 +0200, Sam Ravnborg wrote:
> > > Hi Joe.
> >
> > Hi Sam.
> >
> > > On Sun, Apr 26, 2020 at 10:40:52PM -0700, Joe Perches wrote:
> > > > .yaml files c
On Sun, 26 Apr 2020 23:33:02 -0700 Joe Perches wrote:
> On Mon, 2020-04-27 at 07:57 +0200, Sam Ravnborg wrote:
> > Hi Joe.
>
> Hi Sam.
>
> > On Sun, Apr 26, 2020 at 10:40:52PM -0700, Joe Perches wrote:
> > > .yaml files can contain maintainer/author addresses and it seems
> > > unlikely or unne
Hi Xin Ji
On Mon, Apr 27, 2020 at 02:18:44PM +0800, Xin Ji wrote:
> The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed
> for portable device. It converts MIPI DSI/DPI to DisplayPort 1.3 4K.
>
> The ANX7625 can support both USB Type-C PD feature and MIPI DSI/DPI
> to DP feature. T
https://bugzilla.kernel.org/show_bug.cgi?id=207383
--- Comment #6 from Alex Deucher (alexdeuc...@gmail.com) ---
Can you bisect?
--
You are receiving this mail because:
You are watching the assignee of the bug.
___
dri-devel mailing list
dri-devel@lists
https://bugzilla.kernel.org/show_bug.cgi?id=207383
--- Comment #5 from Duncan (1i5t5.dun...@cox.net) ---
Well, that didn't take long. Four konsole terminals open to do (various
aspects of) a system update. Just a few seconds after I entered the
(git-based) sync command, display-FREEZE!
Back on
Applied. Thanks!
Alex
On Mon, Apr 27, 2020 at 4:03 AM Christian König
wrote:
>
> Am 27.04.20 um 08:37 schrieb Jason Yan:
> > The '>' expression itself is bool, no need to convert it to bool again.
> > This fixes the following coccicheck warning:
> >
> > drivers/gpu/drm/amd/display/dc/core/dc_li
Applied. Thanks!
Alex
On Mon, Apr 27, 2020 at 4:03 AM Christian König
wrote:
>
> Am 27.04.20 um 08:37 schrieb Jason Yan:
> > The '==' expression itself is bool, no need to convert it to bool again.
> > This fixes the following coccicheck warning:
> >
> > drivers/gpu/drm/amd/display/dc/dcn20/dcn
Applied. thanks!
Alex
On Mon, Apr 27, 2020 at 4:02 AM Christian König
wrote:
>
> Am 27.04.20 um 08:36 schrieb Jason Yan:
> > The '>' expression itself is bool, no need to convert it to bool again.
> > This fixes the following coccicheck warning:
> >
> > drivers/gpu/drm/amd/amdgpu/amdgpu_device.
https://bugzilla.kernel.org/show_bug.cgi?id=207383
Duncan (1i5t5.dun...@cox.net) changed:
What|Removed |Added
Kernel Version|5.7-rc1, 5.7-rc2|5.7-rc1, 5.7-rc2, 5.7-rc3
https://bugzilla.kernel.org/show_bug.cgi?id=206987
Cyrax (ev...@hotmail.com) changed:
What|Removed |Added
Kernel Version|5.6.7 |5.7.0-rc3
--
You are receivi
https://bugzilla.kernel.org/show_bug.cgi?id=206987
--- Comment #11 from Cyrax (ev...@hotmail.com) ---
Created attachment 288781
--> https://bugzilla.kernel.org/attachment.cgi?id=288781&action=edit
dmesg output from Linux 5.7-rc3
This is starting to be real problem, I can't do anything remotely
On Fri, 24 Apr 2020 15:44:10 +0800, Zheng Bin wrote:
> Fixes coccicheck warning:
>
> drivers/gpu/drm/rockchip/cdn-dp-reg.c:604:2-3: Unneeded semicolon
> drivers/gpu/drm/rockchip/cdn-dp-reg.c:622:2-3: Unneeded semicolon
> drivers/gpu/drm/rockchip/cdn-dp-reg.c:703:2-3: Unneeded semicolon
>
> Report
On Sun, 26 Apr 2020 18:16:53 +0200, Enric Balletbo i Serra wrote:
> This fixes the following warning detected when running make with W=1
>
> drivers/gpu/drm/rockchip//cdn-dp-core.c:1112:5: warning: no previous
> prototype for ‘cdn_dp_suspend’ [-Wmissing-prototypes]
>
> drivers/gpu/drm
Hi Xin Ji
On Mon, Apr 27, 2020 at 02:16:49PM +0800, Xin Ji wrote:
> Hi all,
>
> The following series add support for the Slimport ANX7625 transmitter, a
> ultra-low power Full-HD 4K MIPI to DP transmitter designed for portable
> device.
>
> This is the v8 version, any mistakes, please let me kn
Hi Xin Ji
On Mon, Apr 27, 2020 at 02:17:46PM +0800, Xin Ji wrote:
> The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed
> for portable device. It converts MIPI to DisplayPort 1.3 4K.
Thanks for providing this binding.
When you re-submit please also send to devicet...@vger.kernel.o
Hi Enric,
Thank you very much for your review, comments below.
I'll leave this a bit more on review before resending with your
suggested fixes.
On Mon, 27 Apr 2020, Enric Balletbo i Serra
wrote:
Hi Adrian
Thank you for your patch.
On 27/4/20 10:19, Adrian Ratiu wrote:
This adds supp
On Mon, 2020-04-27 at 09:02 -0700, Joe Perches wrote:
> On Mon, 2020-04-27 at 17:53 +0300, Sakari Ailus wrote:
> > Add a printk modifier %p4cc (for pixel format) for printing V4L2 and DRM
> > pixel formats denoted by fourccs. The fourcc encoding is the same for both
> > so the same implementation c
https://bugzilla.kernel.org/show_bug.cgi?id=205089
--- Comment #10 from Bruno Jacquet (maxi...@free.fr) ---
With a more recent stack it seems I am no longer experiencing this.
Kernel 5.4.35 and mesa 20.0.5 seems stable for me.
Andreas, did you try upgrading your SW components and see if you still
On Mon, Apr 27, 2020 at 7:45 AM Emil Velikov wrote:
>
> On Fri, 24 Apr 2020 at 19:54, Peter Collingbourne wrote:
> >
> > On Fri, Apr 24, 2020 at 4:11 AM Emil Velikov
> > wrote:
> > >
> > > On Thu, 23 Apr 2020 at 23:51, Peter Collingbourne wrote:
> > > >
> > > > The render node is required by A
On Mon, 2020-04-27 at 17:53 +0300, Sakari Ailus wrote:
> Add a printk modifier %p4cc (for pixel format) for printing V4L2 and DRM
> pixel formats denoted by fourccs. The fourcc encoding is the same for both
> so the same implementation can be used.
[]
> - Added WARN_ON_ONCE() sanity checks. Comment
On Sun, Apr 26, 2020 at 07:57:12AM -0700, Jonathan Bakker wrote:
> Hi Paul,
>
> On 2020-04-26 5:56 a.m., Paul Cercueil wrote:
> >
> >
> > Le ven. 24 avril 2020 à 22:34, H. Nikolaus Schaller a
> > écrit :
> >> From: Jonathan Bakker
> >>
> >> All s5pv210 devices have a PowerVR SGX 540 (revision
On Fri, Apr 24, 2020 at 5:27 PM Andrew F. Davis wrote:
>
> This new export type exposes to userspace the SRAM area as a DMA-Heap,
> this allows for allocations as DMA-BUFs that can be consumed by various
> DMA-BUF supporting devices.
>
> Signed-off-by: Andrew F. Davis
> ---
> .../devicetree/bind
On 21/04/20 15:57, Emanuele Giuseppe Esposito wrote:
> - inode = debugfs_get_inode(dentry->d_sb);
You're not removing debugfs_get_inode so I think you're going to get a
warning (same in tracefs)?
You can wait a few more days for reviews and/or Acked-bys (especially
for patches 6 and 7) and th
On Mon, Apr 27, 2020 at 05:50:07PM +0300, Sakari Ailus wrote:
> Add a printk modifier %p4cc (for pixel format) for printing V4L2 and DRM
> pixel formats denoted by fourccs. The fourcc encoding is the same for both
> so the same implementation can be used.
>
> Suggested-by: Mauro Carvalho Chehab
>
Add a printk modifier %p4cc (for pixel format) for printing V4L2 and DRM
pixel formats denoted by fourccs. The fourcc encoding is the same for both
so the same implementation can be used.
Suggested-by: Mauro Carvalho Chehab
Signed-off-by: Sakari Ailus
---
since v2:
- Add comments to explain why
https://bugzilla.kernel.org/show_bug.cgi?id=207463
Alex Deucher (alexdeuc...@gmail.com) changed:
What|Removed |Added
CC||alexdeuc...@gmail.c
Add a printk modifier %p4cc (for pixel format) for printing V4L2 and DRM
pixel formats denoted by fourccs. The fourcc encoding is the same for both
so the same implementation can be used.
Suggested-by: Mauro Carvalho Chehab
Signed-off-by: Sakari Ailus
---
Documentation/core-api/printk-formats.r
On Mon, 2020-04-27 at 16:00 +0200, Angelo Ribeiro wrote:
> Creates entry for Synopsys DesignWare IPK DRM driver and
> adds myself as maintainer.
[]
> diff --git a/MAINTAINERS b/MAINTAINERS
[]
> @@ -5507,6 +5507,14 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
> F: Documentation/device
On Fri, 24 Apr 2020 at 19:54, Peter Collingbourne wrote:
>
> On Fri, Apr 24, 2020 at 4:11 AM Emil Velikov wrote:
> >
> > On Thu, 23 Apr 2020 at 23:51, Peter Collingbourne wrote:
> > >
> > > The render node is required by Android which does not support the legacy
> > > drmAuth authentication proc
https://bugzilla.kernel.org/show_bug.cgi?id=107381
Alex Deucher (alexdeuc...@gmail.com) changed:
What|Removed |Added
CC||alexdeuc...@gmail.c
On Mon, 27 Apr 2020 at 00:48, syzbot
wrote:
>
> Hello,
>
> syzbot found the following crash on:
>
> HEAD commit:c578ddb3 Merge tag 'linux-kselftest-5.7-rc3' of git://git...
> git tree: upstream
> console output: https://syzkaller.appspot.com/x/log.txt?x=10fbf0d810
> kernel config: h
https://bugzilla.kernel.org/show_bug.cgi?id=207463
--- Comment #1 from Rokas Kupstys (rokups+kernel-b...@zoho.com) ---
Tested 5.4.35-1-lts kernel as well, corruption does happen, but looks bit
different visually. Also i can access another VT without issues, rendering is
ok there. Restarting X11 do
On Fri, Apr 24, 2020 at 3:07 PM Lyude Paul wrote:
>
> drm_dp_mst_wait_tx_reply() returns > 1 if time elapsed in
> wait_event_timeout() before check_txmsg_state(mgr, txmsg) evaluated to
> true. However, we make the mistake of returning this time from
> drm_dp_send_dpcd_write() on success instead of
On Fri, Apr 24, 2020 at 2:13 PM Lyude Paul wrote:
>
> While we support using both tx slots for sideband transmissions, it
> appears that DisplayPort devices in the field didn't end up doing a very
> good job of supporting it. From section 5.2.1 of the DP 2.0
> specification:
>
> There are MST Si
On Fri, 24 Apr 2020, Guru Das Srinagesh wrote:
> On Fri, Apr 24, 2020 at 09:17:58AM +0300, Jani Nikula wrote:
>> On Tue, 21 Apr 2020, Guru Das Srinagesh wrote:
>> > Since the PWM framework is switching struct pwm_state.duty_cycle's
>> > datatype to u64, prepare for this transition by using DIV_RO
https://bugzilla.kernel.org/show_bug.cgi?id=207463
Bug ID: 207463
Summary: [amdgpu] System freeze / corrupted graphics
Product: Drivers
Version: 2.5
Kernel Version: 5.6.7-arch1-1
Hardware: x86-64
OS: Linux
Tre
On 4/27/20 3:15 PM, Wei Yongjun wrote:
> Fix to return a negative error code from the error handling
> case instead of 0, as done elsewhere in this function.
>
> Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
> Signed-off-by: Wei Yongjun
Acked-by: Vladimir Zapolskiy
--
Best wishes,
Vla
Hi Lee,
On 16/03/2020 09:05, Daniel Thompson wrote:
> On Fri, Mar 13, 2020 at 02:16:16PM +, Jon Hunter wrote:
>> Hi Lee, Daniel,
>>
>> On 24/02/2020 14:37, Daniel Thompson wrote:
>>> On Mon, Feb 24, 2020 at 02:07:48PM +, Jon Hunter wrote:
If probing the LP885x backlight fails after th
On Mon, 27 Apr 2020 at 00:48, syzbot
wrote:
>
> Hello,
>
> syzbot found the following crash on:
>
> HEAD commit:c578ddb3 Merge tag 'linux-kselftest-5.7-rc3' of git://git...
> git tree: upstream
> console output: https://syzkaller.appspot.com/x/log.txt?x=10fbf0d810
> kernel config: h
This converts the Analogix ANX7814 bridge DT binding to yaml. Port
definitions and descriptions were expanded, apart from that it's a
direct translation from the original binding.
Signed-off-by: Ricardo Cañuelo
Acked-by: Sam Ravnborg
---
Changes in v3 (suggested by Sam Ravnborg):
- Rename exam
On lun 27-04-2020 11:09:00, Sam Ravnborg wrote:
> Hi Ricardo.
>
> On Mon, Apr 27, 2020 at 10:46:58AM +0200, Ricardo Cañuelo wrote:
> > This converts the Analogix ANX7814 bridge DT binding to yaml. Port
> > definitions and descriptions were expanded, apart from that it's a
> > direct translation fr
On Mon, Apr 27, 2020 at 10:36:42AM +0200, Oliver Graute wrote:
> On 09/04/20, Dan Carpenter wrote:
> > On Thu, Apr 09, 2020 at 11:25:32AM +0200, Oliver Graute wrote:
> > > From: Oliver Graute
> > >
> > > Set Gamma Values and Register Values for the HSD20_IPS
> > >
> > > Signed-off-by: Oliver Gra
Hello!
On 26.04.2020 21:58, Paul Cercueil wrote:
Convert the ingenic,intc.txt doc file to ingenic,intc.yaml.
Some compatible strings now require a fallback, as the controller
generally works the same across the SoCs families.
Signed-off-by: Paul Cercueil
[...]
diff --git
a/Documentation/d
Hi Ricardo.
On Mon, Apr 27, 2020 at 10:46:58AM +0200, Ricardo Cañuelo wrote:
> This converts the Analogix ANX7814 bridge DT binding to yaml. Port
> definitions and descriptions were expanded, apart from that it's a
> direct translation from the original binding.
>
> Signed-off-by: Ricardo Cañuelo
This converts the Analogix ANX7814 bridge DT binding to yaml. Port
definitions and descriptions were expanded, apart from that it's a
direct translation from the original binding.
Signed-off-by: Ricardo Cañuelo
---
Changes in v2 (suggested by Enric Balletbo):
- File name change: use full compa
Hi Gareth.
Looking forward to see the other patches - they seem to be stuck
awaiting approval.
A few comments in the following.
Sam
On Mon, Apr 27, 2020 at 09:21:49AM +0100, Gareth Williams wrote:
> This commit adds support for the Newhaven ATXL#-CTP panel used by the
> Renesas RZ/N1 De
Drop drm_connector handling that is not needed:
- drm_dev_register() in the display controller driver takes
care of registering connectors.
So the call to drm_connector_register() call is not needed in the bridge
driver.
- Use of drm_connector_unregister() is only required for drivers that
Prepare the bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.
Note: the bridge panel will use the connector type from the panel.
Signed-off-by: Sam Ravnborg
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Make the connector creation optional to enable usage of the
megachips-stdp-ge-b850v3-fw bridge with the DRM bridge connector helper.
Signed-off-by: Sam Ravnborg
Cc: Peter Senna Tschudin
Cc: Martin Donnelly
Cc: Martyn Welch
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jo
Prepare the bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.
Note: the bridge panel will use the connector type from the panel.
Signed-off-by: Sam Ravnborg
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
According to the Host Registers documentation for IMX, STM and RK
the LP cfg register should not be written entirely in one go because
some bits are reserved and should be kept to reset values, for eg.
BIT(15) which is reserved in all versions.
This also cleans up the code by removing the the ugly
Prepare for chained bridge with the addition of
get_edid support.
Signed-off-by: Sam Ravnborg
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Cc: Jernej Skrabec
---
drivers/gpu/drm/bridge/tc358767.c | 24 +---
1 file changed, 17 insertions(+),
To prepare for use in a chained bridge setup enable the
detect operation.
Signed-off-by: Sam Ravnborg
Cc: Peter Senna Tschudin
Cc: Martin Donnelly
Cc: Martyn Welch
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Cc: Jernej Skrabec
---
.../gpu/drm/bridge/megach
Display drivers are in the new model expected to create
the connector using drm_bridge_connector_init().
Allow users of this bridge driver to support the new
model by introducing support for optional connector creation.
Signed-off-by: Sam Ravnborg
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Lauren
To prepare for a chained bridge setup add support for the
get_edid bridge operation.
Signed-off-by: Sam Ravnborg
Cc: Peter Senna Tschudin
Cc: Martin Donnelly
Cc: Martyn Welch
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Cc: Jernej Skrabec
---
.../bridge/meg
Fix so drm_device is read from the bridge.
This is a preparation for the connector being optional.
Signed-off-by: Sam Ravnborg
Cc: Peter Senna Tschudin
Cc: Martin Donnelly
Cc: Martyn Welch
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Cc: Jernej Skrabec
---
Make the connector creation optional to enable usage of the
nxp-ptn3460 bridge with the DRM bridge connector helper.
Signed-off-by: Sam Ravnborg
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Cc: Jernej Skrabec
---
drivers/gpu/drm/bridge/nxp-ptn3460.c | 6 ++
Prepare the bridge driver for chained operation by adding
support for the detect operation.
Signed-off-by: Sam Ravnborg
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Cc: Jernej Skrabec
---
drivers/gpu/drm/bridge/tc358767.c | 16 +---
1 file changed,
The ti-tpd12s015 do not create any connector, so ignore
the flags argument, just pass it on to the next bridge
in the chain.
Signed-off-by: Sam Ravnborg
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Cc: Jernej Skrabec
---
drivers/gpu/drm/bridge/ti-tpd12s015.c |
Factor out connector creation to a small helper function.
Signed-off-by: Sam Ravnborg
Cc: Peter Senna Tschudin
Cc: Martin Donnelly
Cc: Martyn Welch
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Cc: Jernej Skrabec
---
.../bridge/megachips-stdp-ge-b850v3-f
The Synopsis MIPI DSI v1.01 host controller is quite widely used
on platforms like i.mx6 and is not very different from the other
versions like the 1.31/1.30 used on rockchip/stm. The protocols
appear to be the same, only the register layout is different and
the newer versions have new features sym
Now that we have a proper driver for the imx6 mipi dsi host controller
we can fill in the missing properties to get it working.
Cc: Laurent Pinchart
Cc: Rob Herring
Cc: devicet...@vger.kernel.org
Signed-off-by: Adrian Ratiu
---
New in v8.
---
arch/arm/boot/dts/imx6qdl.dtsi | 8
1 file
This adds support for the Synopsis DesignWare MIPI DSI v1.01 host
controller which is embedded in i.MX 6 SoCs.
Based on following patches, but updated/extended to work with existing
support found in the kernel:
- drm: imx: Support Synopsys DesignWare MIPI DSI host controller
Signed-off-by: Liu
Up until now the assumption was that the synopsis dsi bridge will
directly connect to an encoder provided by the platform driver, but
the current practice for drivers is to leave the encoder empty via
the simple encoder API and add their logic to their own drm_bridge.
Thus we need an ablility to c
Make the connector creation optional to enable usage of the
parade-ps8622 bridge with the DRM bridge connector helper.
This change moves drm_helper_hpd_irq_event() call in the attach
function up before the connector creation.
Signed-off-by: Sam Ravnborg
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc:
Add the get_modes() bridge operation to prepare for
use as a chained bridge.
Add helper function that is also used by the connector.
Signed-off-by: Sam Ravnborg
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Cc: Jernej Skrabec
---
drivers/gpu/drm/bridge/nxp-ptn3
Make the connector creation optional to enable usage of the
tc358764 bridge with the DRM bridge connector helper.
Signed-off-by: Sam Ravnborg
Reviewed-by: Laurent Pinchart
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Cc: Jernej Skrabec
---
drivers/gpu/drm/bri
This provides an example DT binding for the MIPI DSI host controller
present on the i.MX6 SoC based on Synopsis DesignWare v1.01 IP.
Cc: Rob Herring
Cc: Neil Armstrong
Cc: Fabio Estevam
Cc: Laurent Pinchart
Cc: devicet...@vger.kernel.org
Tested-by: Adrian Pop
Tested-by: Arnaud Ferraris
Signe
Prepare the bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.
Note: the bridge panel will use the connector type from the panel.
Signed-off-by: Sam Ravnborg
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Laurent Pinchart
Cc: Jonas Karlman
Prepare the bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.
The bridge panel will use the connector type reported by the panel,
where the connector for this driver hardcode DRM_MODE_CONNECTOR_LVDS.
Signed-off-by: Sam Ravnborg
Reviewed-
According to the DSI Host Registers sections available in the IMX,
STM and RK ref manuals for 1.01, 1.30 and 1.31, the register fields
are smaller or bigger than what's coded in the driver, leading to
r/w in reserved spaces which might cause undefined behaviours.
Tested-by: Adrian Pop
Tested-by:
Prepare the bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.
The bridge driver assume the panel is optional.
The relevant tests are migrated over to check for the
pnale bridge to keep the same functionality.
Note: the bridge panel will u
In order to support multiple versions of the Synopsis MIPI DSI host
controller, which have different register layouts but almost identical
HW protocols, we add a regmap infrastructure which can abstract away
register accesses for platform drivers using the bridge.
The controller HW revision is det
Hello everyone,
The dt-binding added in this series depends on [1] for
"make dt_binding_check" to pass.
The biggest change in v8 is a conversion of the imx6 host controller
driver to drm_bridge and an extension to dw_mipi_dsi.c which allows
platform drivers to daisy-chain bridges between the enco
All panels shall report a connector type.
panel-simple has a lot of panels with no connector_type,
and for these fall back to DPI as the default.
Signed-off-by: Sam Ravnborg
Cc: Thierry Reding
Cc: Sam Ravnborg
---
drivers/gpu/drm/panel/panel-simple.c | 10 --
1 file changed, 8 insertio
Somehow Laurent tricked me into updating a bridge driver.
In reality, having updated a driver yourself makes for much
better understanding of what is going on.
So in order to provide proper review feedback I deciced to give
it a spin.
Second iteration of this patchset covers several drivers,
and a
The stm mipi-dsi platform driver added a version test in
commit fa6251a747b7 ("drm/stm: dsi: check hardware version")
so that HW revisions other than v1.3x get rejected. The rockchip
driver had no such check and just assumed register layouts are
v1.3x compatible.
Having such tests was a good idea
Register existence, address/offsets, field layouts, reserved bits and
so on differ between MIPI-DSI versions and between SoC vendor boards.
Despite these differences the hw IP and protocols are mostly the same
so the generic bridge can be made to compensate these differences.
The current Rockchip
The boe,hv070wsa-100 panel is a LVDS panel.
Fix connector type to reflect this.
With this change users of this panel do not have to specify the
connector type.
v2:
- Add .bus_format (Laurent)
- Add .bus_flags
Signed-off-by: Sam Ravnborg
Cc: Laurent Pinchart
Cc: Thierry Reding
Cc: Sam Ravn
On vie 24-04-2020 16:08:10, Enric Balletbo i Serra wrote:
> Hi Ricardo,
>
> Thank you for your patch.
Hi Enric,
Thanks for reviewing it.
> > + "#size-cells":
> > +const: 0
> > +
>
> I don't' think you need to specify this. You can drop it (better double check
> with Rob, though)
Am 27.04.20 um 08:37 schrieb Jason Yan:
The '>' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c:602:28-33: WARNING:
conversion to bool not needed here
Signed-off-by: Jason Yan
Revie
Am 27.04.20 um 08:37 schrieb Jason Yan:
The '==' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_mpc.c:455:70-75: WARNING:
conversion to bool not needed here
Signed-off-by: Jason Yan
Revie
Am 27.04.20 um 08:36 schrieb Jason Yan:
The '>' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3004:68-73: WARNING:
conversion to bool not needed here
Signed-off-by: Jason Yan
Reviewed-by
'host1x_debug_init()' must be reverted in an error handling path.
This is already fixed in the remove function since commit 44156eee91ba
("gpu: host1x: Clean up debugfs on removal")
Signed-off-by: Christophe JAILLET
---
drivers/gpu/host1x/dev.c | 1 +
1 file changed, 1 insertion(+)
diff --git
The '>' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c:602:28-33: WARNING:
conversion to bool not needed here
Signed-off-by: Jason Yan
---
drivers/gpu/drm/amd/display/dc/core/dc_link_
Convert the ingenic,uart.txt to a new ingenic,uart.yaml file.
A few things were changed in the process:
- the dmas and dma-names properties are now required.
- the ingenic,jz4770-uart and ingenic,jz4775-uart compatible strings now
require the ingenic,jz4760-uart string to be used as fallback, si
Convert the ingenic,cgu.txt doc file to ingenic,cgu.yaml.
The binding documentation has been updated as well. The node can have a
child node that corresponds to the USB PHY, which happens to be present
in the middle of the CGU registers.
Signed-off-by: Paul Cercueil
---
.../devicetree/bindings/
Hi all,
The following series add support for the Slimport ANX7625 transmitter, a
ultra-low power Full-HD 4K MIPI to DP transmitter designed for portable device.
This is the v8 version, any mistakes, please let me know, I will fix it in
the next series. This series fix several coding format and de
Perhaps the Windows Intel video driver doesn't try the highest
available mode reported by GOP in some circumstances? Seems that the
right panel orientation appear as a less mode than the wrong one.
El dom., 26 abr. 2020 a las 21:35, David Santamaría Rogado
() escribió:
>
> Hi, Jani don't forget ab
Hi Nikolaus,
On 24.04.20 22:34, H. Nikolaus Schaller wrote:
The Imagination PVR/SGX GPU is part of several SoC from
multiple vendors, e.g. TI OMAP, Ingenic JZ4780, Intel Poulsbo,
Allwinner A83 and others.
With this binding, we describe how the SGX processor is
interfaced to the SoC (registers a
1 - 100 of 125 matches
Mail list logo
