ARM's Juno board has two HDLCD controllers, each linked to an NXP
TDA19988 HDMI transmitter that provides output encoding. Add them
to the device tree.

Signed-off-by: Liviu Dudau <Liviu.Dudau at arm.com>
Acked-by: Sudeep Holla <sudeep.holla at arm.com>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 46 +++++++++++++++++++++++++++++++---
 1 file changed, 42 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi 
b/arch/arm64/boot/dts/arm/juno-base.dtsi
index dd5158e..8ee094a 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -92,8 +92,8 @@
                        scpi_clk: scpi_clocks at 3 {
                                compatible = "arm,scpi-variable-clocks";
                                #clock-cells = <1>;
-                               clock-indices = <3>, <4>;
-                               clock-output-names = "pxlclk0", "pxlclk1";
+                               clock-indices = <3>;
+                               clock-output-names = "pxlclk";
                        };
                };

@@ -123,6 +123,34 @@
                clock-names = "apb_pclk";
        };

+       hdlcd at 7ff50000 {
+               compatible = "arm,hdlcd";
+               reg = <0 0x7ff50000 0 0x1000>;
+               interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&scpi_clk 3>;
+               clock-names = "pxlclk";
+
+               port {
+                       hdlcd1_output: endpoint at 0 {
+                               remote-endpoint = <&tda998x_1_input>;
+                       };
+               };
+       };
+
+       hdlcd at 7ff60000 {
+               compatible = "arm,hdlcd";
+               reg = <0 0x7ff60000 0 0x1000>;
+               interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&scpi_clk 3>;
+               clock-names = "pxlclk";
+
+               port {
+                       hdlcd0_output: endpoint at 0 {
+                               remote-endpoint = <&tda998x_0_input>;
+                       };
+               };
+       };
+
        soc_uart0: uart at 7ff80000 {
                compatible = "arm,pl011", "arm,primecell";
                reg = <0x0 0x7ff80000 0x0 0x1000>;
@@ -141,14 +169,24 @@
                i2c-sda-hold-time-ns = <500>;
                clocks = <&soc_smc50mhz>;

-               dvi0: dvi-transmitter at 70 {
+               hdmi-transmitter at 70 {
                        compatible = "nxp,tda998x";
                        reg = <0x70>;
+                       port {
+                               tda998x_0_input: endpoint at 0 {
+                                       remote-endpoint = <&hdlcd0_output>;
+                               };
+                       };
                };

-               dvi1: dvi-transmitter at 71 {
+               hdmi-transmitter at 71 {
                        compatible = "nxp,tda998x";
                        reg = <0x71>;
+                       port {
+                               tda998x_1_input: endpoint at 0 {
+                                       remote-endpoint = <&hdlcd1_output>;
+                               };
+                       };
                };
        };

-- 
2.6.4

Reply via email to