On Sat, Oct 13, 2001 at 10:08:50PM +0200, Manuel Teira wrote:
Regarding theories on DMA and Mach64 and XFree 4.10:
I just finished a module that uses the System DMA unit for video capture
transfers, and it works fine under a (highly hacked) XFree 4.1.0 server.
System: Dual 550 Celeron, All-in-W
R C writes:
> On Sat, Oct 13, 2001 at 10:08:50PM +0200, Manuel Teira wrote:
>
> Regarding theories on DMA and Mach64 and XFree 4.10:
>
> I just finished a module that uses the System DMA unit for video capture
> transfers, and it works fine under a (highly hacked) XFree 4.1.0 server.
>
> Syst
On Wed, 17 Oct 2001 [EMAIL PROTECTED] wrote:
>
> R C writes:
>
> > On Sat, Oct 13, 2001 at 10:08:50PM +0200, Manuel Teira wrote:
> >
> > Regarding theories on DMA and Mach64 and XFree 4.10:
> >
> > I just finished a module that uses the System DMA unit for video capture
> > transfers, and i
I spent an incredibly frustrating 4 weeks trying to
get the DRI to work with r128 and g400 cards on Dell
precision workstation only to find that my problem
was precisely because bus mastering was NOT enabled
on boot! As soon as I fixed that everything worked
fine. Apparently different BIOSes WIL
Hi,
I'm using the r128.ko driver with a matrox rage mobility chipset under
FreeBSD:
info: [drm] Checking PCI vendor=32902, device=28947
info: [drm] Checking PCI vendor=4545, device=1096
info: [drm] Checking PCI vendor=4098, device=19526
drm0: port 0x2000-0x20ff mem
0xf410-0xf4103fff,0xf800
On Wed, 17 Oct 2001, Mike Westall wrote:
> I spent an incredibly frustrating 4 weeks trying to
> get the DRI to work with r128 and g400 cards on Dell
> precision workstation only to find that my problem
> was precisely because bus mastering was NOT enabled
> on boot! As soon as I fixed that ev
On Wed, Oct 17, 2001 at 11:45:39AM +, [EMAIL PROTECTED] wrote:
> Thank you very much. I'll try to see what is missing in the GUI DMA test
> in the DRI code.
> At a first glance, I don't remember to have seen a pci_set_master call
> anywhere in the DRI code. It seems important, doesn't it?
Mike Westall writes:
> I spent an incredibly frustrating 4 weeks trying to
> get the DRI to work with r128 and g400 cards on Dell
> precision workstation only to find that my problem
> was precisely because bus mastering was NOT enabled
> on boot! As soon as I fixed that everything worked
> fin
On Wed, 17 Oct 2001 [EMAIL PROTECTED] wrote:
> Thanks for your comments, guys. In three or four hours (if no new 'browns')
> we'll have the answer. It would be nice if this were the only problem. ;-)
> Anyway, I think it won't be the problem, because nobody have had success
> with the Mach64 Bus
Mike A. Harris:
>ATI did the 2D driver development for the 8500/7500 in house, and
>contributed that to XFree86, which is in the CVS trunk now for
>some time. I have tested it, and it works.
>
>3D support is not yet available, however it will likely happen,
>and be integrated at some point in t
10 matches
Mail list logo
