Do you select to ignore the imported Q if it is a dupe? If not you
overwrite the previously confirmed Q with an unconfirmed one.
On Wed, Feb 21, 2024, 21:15 Dick NY1E wrote:
> I found out WHEN I lose my conformations, when I import my log from WSJT.
> I can load my backup .dxl and QSLs come
I have always used the same settings as Mike except sometimes on different
computers the com port varies.. And this includes using the USB interface
on the rig. You should be able to use the same settings on the KX3. There
are some differences, but not enough to bother. At least it has never
Not the actual prefix of the call, but the prefix field.
On Tue, Sep 13, 2022, 5:28 AM Mike Cizek W0VTT wrote:
> Hello Jean Paul,
>
> You must change the prefix from K to KH6.
>
>
> 73,
> Mike Cizek W0VTT
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net On
> Behalf
I wouldn't delete any file, just rename it so if it turns out to not be the
problem you don't lose anything.
On Thu, Apr 1, 2021, 11:33 Kostas SV1DPI wrote:
> I would bet that some file has broken. In save directory delete the
> config files. Try to run it again. Also in backup directory is the
I just ran the update and was taken from 9.0.3 to 9.0.9.1259. I think you
were probably at 9.0.3 before the update.
On Fri, Sep 18, 2020, 20:25 wd4ngb wrote:
> I went ahead and upgraded my 8.05 to 9.3. I installed it, and got it
> going fine. Merged my new FT8 log into it fine. I am planing on
Process them with the proper certificate in TQSL, then submit as usual.
On Thu, May 7, 2020, 15:54 wrote:
> Using DX4WIN ver 9.09.
>
> Trying to add qso's to lotw. I have 2 callsigns N0JZ & N0AJZ. Have uploaded
> the qso's for N0JZ (02-18-2000 to current date) but need to load qso's for
>
Or plug if into the key jack instead of the paddle jack.
On Fri, Jan 17, 2020, 19:55 Joe Subich, W4TV wrote:
>
> Turn off the keyer in your transceiver!
>
> 73,
>
> ... Joe, W4TV
>
>
> On 2020-01-17 7:31 PM, W9RPM wrote:
> > HI, I had Phil W1GEE make an cw Interface for me. Hooked it up.
How does one deal with periods of operation when in another grid? I travel
for work and will set up a portable operation and work some FT4/8 but I
don't see how to track this in my main log. I don't want to work people
from North Dakota and submit to LOTW showing that I was in Nebraska.
--
Jim
The main problem with automating a lot of this stuff is accuracy. People
move and neglect updating their info until it is time to renew. Or they do
portable operations (I do this a lot as my work takes me to different
areas, most in same call area, but different state or county.) I spent last
Since you say that com 2 no longer shows up in device manager that is the
first place to look. First look for hidden devices to see if it has somehow
been hidden. Are your serial ports actual serial ports or USB adapters?
On Mon, Jan 13, 2020, 11:52 Leigh Sedgwick wrote:
> You probably have
Does it not open at all (not highlighted on Windows dropdown) or is it
"lost" (open but not visible)?
On Tue, Dec 31, 2019 at 11:01 AM Radivoj Kar, F6GNZ via DX4WIN <
dx4win@mailman.qth.net> wrote:
> Today I had a surprise from dx4w v. 8.05: World Map would not open!!
> 73, Radi f6gnz
>
First place to check is the port setting. Make sure the data rate, data
bits, stop bits and everything else matches. Then make sure correct rig
file is selected.
Jim Rhodes
K0XU
On Sun, Dec 8, 2019, 13:14 Donald Chamberlain wrote:
> I have yaesu 5000 and have signal link hooked from trancei
I saw these messages come across and didn't remember when I last saw
updates, so I opened up my save directory and saw that there were new .dat
files in there from Oct. 23rd. So I am up to date. But when I type
"version" in the call field and tab the date that comes up is Oct. 16th,
the date I
Before you do anything else! Navigate to the save directory for your Dx4Win
files. Look for a file called something like N2MMLog.~XL. This is the log
file from before the last file save. Now, rename or delete (your choice)
your current log file (like N2MMlog.DXL, then rename the N2MMLog.~XL to
Or, if you are using windiz anyway, you could look in the recycle bin and
try to restore the file.
On Sun, Jun 30, 2019 at 2:47 PM Mike Cizek W0VTT wrote:
> Hello Bob,
>
> Try it and see. If your wsjt log is already gone, you have nothing to
> lose.
> Filter for FT8 QSOs. Do a Count Filter
Of course you have to do that after every log import to keep it up to date.
I know I do anyway as I use laptops for portable sessions and need to
cosolidate logs to one place anyway
Jim Rhodes
K0XU
On Tue, Sep 11, 2018, 14:48 w...@att.net wrote:
> Jim/ AD1F
> RR -Very good info
I would get in touch with Paul to see if there was a glitch. I ordered late
Thursday (or very early Friday) and my key arrived early afternoon Friday.
I wouldn't have expected it till after the weekend, and won't be home to
install it till then anyway.
Jim Rhodes
K0XU
On Oct 21, 2017 08:07
I ordered Thursday and got mine the next day.
Jim Rhodes
K0XU
On Oct 21, 2017 05:54, "ROBERT GARCEAU" <rgarc...@snet.net> wrote:
> What has been the wait time for the key to get sent to the subscriber?I
> sent my order in late yesterday afternoon. Credit card has bee
on the menu. What on earth have I done wrong? I can pull the log up
with 6.03 do an export, but this is a pain. Any ideas?
Jim Rhodes K0XU
[EMAIL PROTECTED]
Experience is the thing you have left when everything else is gone.
___
Dx4win
Since I upgraded to 6.04 I cannot export a file. The selection is greyed
out on the menu. What on earth have I done wrong? I can pull the log up
with 6.03 do an export, but this is a pain. Any ideas?
Jim Rhodes K0XU
[EMAIL PROTECTED]
Experience is the thing you have left when everything else
it much more user friendly.
Jim Rhodes K0XU
[EMAIL PROTECTED]
) and should be downloaded somewhere
else if you don't have internet?
Jim Rhodes K0XU
[EMAIL PROTECTED]
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
Jim Rhodes K0XU
[EMAIL PROTECTED]
printing in the middle of a
partially used sheet of labels?
73, Ed N3HXQ
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
Jim Rhodes K0XU
[EMAIL PROTECTED]
24 matches
Mail list logo
