Hi dx4win'ers,
Is there a way to disable the outside lines on a label in version 9 when you
print?
I know about the lines around the qso data.
73
Marc ON4MA
--
Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware.
https://www.avast.com/antivirus
_
I lost my bandmap window . Probely a silly question but did not find it
in the helpfile.
73
Marc ON4MA
DX4win9.04
---
Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware.
https://www.avast.com/antivirus
_
Is it possible to connect TS990 via USB for radio controlling in Dx4win?
I installed driver from Kenwood site as COM3. I have change in radio
USB to 9600 baud and dx4win also. But software is hanging.
Marc ON4MA
---
Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoft
Hi folks
I'm scare to switch over to version 8. I have the new key but i see in my
mailbox more than
300msg to read about '' dx4win ver 8.0".
Is it working ?
marc ON4MA
---
avast! Antivirus: Uitgaande bericht is onbesmet.
Virus Gegevensbestand (VPS): 090812-0, 12/08/2009
Getest op: 13
Bob,
It is working from the earlier versions with my 13 years old ft1000mp.
Adress 00 baudrate 4800
defaults are ON
Poll rate 5000
max tries 6
dtr HIGH
Marc ON4MA
- Original Message -
From: "Bob Stewart"
To: "DX4WIN Reflector"
Sent: Monday, August 10, 2009 12:46 PM
Subject: [Dx4win
No problem
you have to run it under administrator priveleges
marc on4ma
- Original Message -
From: "KD3TB"
To:
Sent: Wednesday, April 29, 2009 6:02 PM
Subject: [Dx4win] Running Dx4win in Vista
>I plan on upgrading my radio shack computer very soon. Since it's almost
> impossible to
There is a window for this
go to preferences /packet 1/ warning messages / select Beep -show window
custome a filter for this in packet 2 / warning patterns .
see also AD1C website
marc ON4MA
- Original Message -
From: "Andy-UA0BA" <[EMAIL PROTECTED]>
To:
Sent: Sunday, November 30,
Hi guy's
after 2 years of silence I will swith on my radio's and antennas again.(What is
left over from te antennas) A new computer installed running
Vista Ultmate . I installed dx4win70504 as a administrator and it is running.
Now i have two backup files on4ma.dxl and dx4win.cty from th
you can setup your own labelsheet in dx4win !
on4ma Marc
- Original Message -
From: "Phillip Long" <[EMAIL PROTECTED]>
To:
Sent: Sunday, October 21, 2007 7:16 PM
Subject: [Dx4win] printer query
> Hi Folks..I am new to dx4win.my old "log plus" printed single labels to
> Avery 4177 tra
Paul
you could change the radio file .This is already somewhere in the archives
how to do it ..
simply edit the radio file (make first a backup or change the name)
look for this
[MODES]
AM=3;4,5;N
CW=2;2,3;N
FM=4;6,7;N
PACK=6;10,11;N
RTTY=5;8,9;N
SSB=0,1;0,1;N
change PACK to RTTY and i think it
John,
look at http://dx4win.ad1c.us/appnotes/index.htm
scroll down and you see some tips to use the talk-window with your callsign.
While upgrading to 7.02 you forgot the ini file merging from your last
version.
Marc on4ma
- Original Message -
From: "John Desmond" <[EMAIL PROTECTED]>
To:
That exact what I see also here with my winkeyer USB unit.When polling my
radio
dx4win is acting slow and the cw is also broken.I give one USB keyer to a
Guy ON4AOI
to see how its work with his system.
Marc ON4MA
- Original Message -
From: "Jim Reisert AD1C" <[EMAIL PROTECTED]>
To:
Cc:
works ok here (winkey usb ) com5 with dx4win 7.02.15
marc on4ma
- Original Message -
From: "Mark" <[EMAIL PROTECTED]>
To: "DX4WIN List Server"
Sent: Monday, January 22, 2007 9:32 PM
Subject: [Dx4win] winkey2 support
> I've had some problems with using my new WINKEY2 (USB) with DX4WIN.
- Original Message -
From: "Pete Smith" <[EMAIL PROTECTED]>
To: "Mark" <[EMAIL PROTECTED]>; "DX4WIN List Server"
Sent: Monday, January 22, 2007 10:22 PM
Subject: Re: [Dx4win] winkey2 support
> I'm having the same problem. Just switched to 7.02.15, which I upgraded
to from 6.03, largely
i use winkey usb version and it works ok with version 7.02.15
the older rs232 works also.
marc on4ma
- Original Message -
From: "Dave Hawes" <[EMAIL PROTECTED]>
To:
Sent: Sunday, December 24, 2006 2:51 PM
Subject: [Dx4win] WinKeyer USB with DX4WIN
> I'm a satisfied 6.04 user, but pond
Franki,
time to update to dw4win 7 .winkey is supported .You have still
7 days left to have the registation key under the christmas tree from your
lady ;---)
OH OH OH ..happy christmas guy 's and lady's
Marc on4ma
- Original Message -
From: "Franki ON5ZO" <[EMAIL PROTECTED]
u out.
- Original Message -
From: "Ed Douglass, AA9OZ" <[EMAIL PROTECTED]>
To: "Marc Wullaert ON4MA" <[EMAIL PROTECTED]>
Sent: Monday, December 04, 2006 7:26 PM
Subject: Re: [Dx4win] DX4WIN + TS-850 + RIGBlaster + CW
> Marc,
>
> Thanks for your help.
>
I'm finding it al in the help file setting preferences/preferences CW .
to hookup a CW interface via com.
setting/preferences preferences/RADIO
to hookup a radio
and finaly ALT+K to have the keyboard menu coming up in dx4win !
You dont do the impossible but you have to read a little mor
Howdy Guy's
This is how dx4win works.
When you are real time logging and from the moment
you hit f9 with radio on .When a spot is coming it changed a few seconds to
that spot
mode and band while checking your log to see you need it or not !Nothing
happens
with the radio and after 2 seconds (probel
>
> Hi Milan,
>
> How is this different from the file that comes with DX4WIN?
>
> 73 - Jim AD1C
>
>
> --
> Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
> USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
> ___
This file whe
thanks.
Now i have work to check my DXCC lost some confirmed and on others bands
have some more ??
marc on4ma
- Original Message -
From: "Jim Reisert AD1C" <[EMAIL PROTECTED]>
To: "marc wullaert" <[EMAIL PROTECTED]>; "DX4WIN List"
Sent: S
scott
look at http://mailman.qth.net/pipermail/dx4win/2005-March/006294.html
thats the way I do it.Thakes a little bit time for tho change the adif log
.If you need
some help about the word '' brol '' let me know ;-))
marc on4ma
- Original Message -
From: "Scott Neader KA9FOX" <[EMAIL P
Maybe you could ask your question to Paul or Steve !
sure i love to see it was supported in dx4win.I'm still
waiting to upgrade from 6.04 !!
- Original Message -
From: "Paul Pescitelli" <[EMAIL PROTECTED]>
To:
Sent: Saturday, April 22, 2006 11:11 PM
Subject: [Dx4win] Winkey
Greetin
Why use another software when it is avaible in Dx4win ?
marc on4ma
- Original Message -
From: "Peter Bacon" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, April 05, 2006 9:20 AM
Subject: [Dx4win] Using DX4WIN with TRX-Manager
Does anyone know if it is possible to get DX4WIN to work with TRX-Ma
it is working here ok
ot4t
- Original Message -
From: "Klaus D. Behrndt" <[EMAIL PROTECTED]>
To:
Sent: Saturday, April 01, 2006 11:21 AM
Subject: [Dx4win] Homepage from AD1C
> Hi,
> its impossible for me to reach Jims homepage www.ad1c.us.
> Are there others especially from Europe havin
Do I have to pay for a registartion key when you change your callsign ?
Belgium's can now ask for a vanity callsign 2x1.
Marc ON4MA - OT4T
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.2.6/288 - Release Date: 22/03/2006
I thaugt this whas already in the archive's of dx4win.The later version of
the rc2800px is not working
whit dx4win ..something to do with the change of firmware !
on4ma
- Original Message -
From: "Martin H. Green" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, March 21, 2006 3:04 AM
Subject: [Dx
You can do it on this way like I did. Change the qso in Prefix field to 3Y/P
(Peter 1)
and log it .Now i you type 3y0x in callsignfield it wil popup as Peter One
73
Marc ON4MA
- Original Message -
From: "Carter, K8VT" <[EMAIL PROTECTED]>
To:
Sent: Saturday, February 11, 2006 2:22 PM
Sub
It transforms ascii to dit dit -dit dah.Where most CW software apllications
strugles
with high cpu use on a lpt port it controlls the keyer on a comport.
And it is cheaper like other external keyers where the most options like
memorys
are not used.
The new device like microhamkeyer controls it via
There are small programs avaible at k1el.com to run the winkey.
I hope also that Winkey will be supprted soon in DX4WIN so I can update
my dx4win6.04 version.But no response from the programmers.
Season Greatings
marc ON4MA
- Original Message -
From: "Goran Lundell" <[EMAIL PROTECTED]>
To
if you push F8 the logwindow will be empty.Now you can check qso's on every
empty field
let's say :you wanna see all qso's with a KL7 . in prefix fill in KL7
and enter
now look in your logbook window : all qso with kl7 will be there.you wanna
see als qso
with KL7 buth only on band 160m ... pref
I think in writelog you can export adif file .Those file can be imported
in dx4win.
marc on4ma
- Original Message -
From: "Darryl Hazelgren" <[EMAIL PROTECTED]>
To:
Sent: Monday, November 14, 2005 3:20 PM
Subject: [Dx4win] Importing WriteLog file
> Hello Everyone.
>
> I would like to i
copy the file from version 6.04 dx4win6/radios/ xx to your new
dx4win7/radios folder
and see what is happening with the radio
probely the files is screwed or you did find a bug in version 7.
on4ma
marc
- Original Message -
From: "Andy Hewitt" <[EMAIL PROTECTED]>
To: "[EMAIL PROTEC
file/preferences/ packet1 /warning messages
on4ma
73
- Original Message -
From: "n3drk" <[EMAIL PROTECTED]>
To: "dx4win"
Sent: Tuesday, November 08, 2005 1:13 AM
Subject: [Dx4win] Announcement Screen
Where in the program can I prevent the Announcement Screen from coming up on
every post
This keyer is not supported by DX4WIN why advertise here ?
Marc on4ma
- Original Message -
From: "Joe Subich, W4TV" <[EMAIL PROTECTED]>
To:
Sent: Thursday, September 01, 2005 10:24 PM
Subject: [Dx4win] WinKey with USB ...
>
> The new microHAM CW Keyer is now shipping. I have bee
Me and allot others also.
I'm still waiting to upgrade the the 7.01 version !
on4ma
- Original Message -
From: "Bob Naumann - W5OV" <[EMAIL PROTECTED]>
To: "'DX 4 Windows'"
Sent: Saturday, August 13, 2005 2:32 PM
Subject: RE: [Dx4win] Mid-confusion stage of SO2R setup
>
> Just wanted t
ron,
if you look in the dxwin archieve ,you find the solution if you import from
adif file
on4ma
marc
- Original Message -
From: "Ron Philip" <[EMAIL PROTECTED]>
To:
Sent: Monday, July 11, 2005 2:46 AM
Subject: [Dx4win] Adding message to "Notes for this QSO" slot (DX4WIN 7.01)
> I just c
Hi
I'm still waiting to upgrade to 7.01.I see comments of bugs in the new
version.
But I don see any reaction for bugs from the programmer to the group!
Have to wait another year or 2 for a new upgrade and pay again ?
Look at N1MM contest software.Free and if a bug is found they try to
have a fix
I have setup my DXC program but found out I needed the portnumber (7300)
to use it !
A lot off belgiums hams are using this software ,I just let them know how to
do it !
Marc ON4MA
- Original Message -
From: "Jim Reisert AD1C" <[EMAIL PROTECTED]>
To:
Sent: Friday, June 17, 2005 8:23 PM
S
preferences/personal/userlevel ..check it
- Original Message -
From: "Egbert Hertsen" <[EMAIL PROTECTED]>
To: "DX4WIN"
Sent: Monday, May 30, 2005 6:07 PM
Subject: [Dx4win] databases greyed out
Hi !
I just upgraded to version 7.01 for which I received my licence key.
After going through
you find it in dx4win701\docs\order.txt
here a copy ...
marc on4ma
DX4WIN Version 7 license (no CDROM) $89.95
(Download from website)
DX4WIN Version 7 Printed User's Guide $15.00
UPGRADES:
From Version 4 or earlier$50.00
From Version 5
have the EZmaster now and would be nice if you encourage Paul to support
Winkey !
- Original Message -
From: "Jim Reisert AD1C" <[EMAIL PROTECTED]>
To: "Marc Wullaert (ON4MA)" <[EMAIL PROTECTED]>; "DX4WIN Reflector"
Sent: Monday, May 23, 2005
Small adjustments for the determination of a
prefix and using the information from a previous QSO.
Hope this stands for the usa states bug ?
No winkey support ?
marc on4ma
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.322 / Virus Database: 266.11.
this is not a dx4win isue ..but more a operater error.
I have lots of contest qso cards where time's are off 7 hours.Even I have
some where contest is on monday evening !!
Check your adifs files or CT files before doing a save !
Maybe whe have to write a book '' Dx4win for Dummies"
marc on4ma
---
I sended this mail some 2 weeks ago but got no respons!
Wintertime is over ,whe are moving to the springtime, any response please
from Steve or Paul ?
Marc on4ma
> To Paul and programmers
> I just finished my Winkey CW keyer.Could it be imported into the next
> version
> of dx4win ?
> I now us
probely you did import your qso again.check the other qso box to
see you dont have dupes for those qso's !!
marc on4ma
- Original Message -
From: "Dick Flanagan" <[EMAIL PROTECTED]>
To: "DX4WIN Reflector"
Sent: Monday, May 09, 2005 10:18 AM
Subject: Re: [Dx4win] Notes For This Call Odditie
Do you have the printer installed under xp?
on4ma
- Original Message -
From: "Harald Kj?de" <[EMAIL PROTECTED]>
To:
Sent: Sunday, May 08, 2005 6:47 PM
Subject: [Dx4win] labelprinter
> After upgrading from windows 98 to XP I`m unable to print anything at all,
> I`m using dx4win 4.04 , im
To Paul and programmers
I just finished my Winkey CW keyer.Could it be imported into the next
version
of dx4win ?
I now use QD keyer by G3VGR.Works OK just the PTT timing is a little bit
long when
the first dit or dot is sended !
marc ON4MA
http://users.telenet.be/on4ma
--
No virus found in
Jim,
Comfoolery is freeware programma.
Got plenty off hits in google.On this forum you see some instructions.
http://www.mp3car.com/vbulletin/showthread.php?t=23174&page=2
there is another one :
http://curioustech.home.insightbb.com/xport.html
73
marc on4ma
- Original Message -
From:
Hope you also fix the states bug !
great job ..Paul and Steve
on4ma
- Original Message -
From: "Paul van der Eijk" <[EMAIL PROTECTED]>
To: "Milan G?tter" <[EMAIL PROTECTED]>; "[EMAIL PROTECTED] Qth. Net"
Sent: Friday, March 18, 2005 5:25 AM
Subject: [Dx4win] Re: DX4WIN 6.04
> Milan,
>
could you explain what file you import ? Adif file ?
I never runned in this problem .
on4ma marc
- Original Message -
From: "Rick Graham" <[EMAIL PROTECTED]>
To:
Sent: Monday, March 14, 2005 12:27 AM
Subject: [Dx4win] Contest import - how many of you?
> Hi all,
>
> After playing around
Hi,
I want to import my contestlog from n1mm in to dx4win.
Some years ago I had a small program in dos to convert CT logs into
dx4win.But lost it
where in the dx4win NOTE FOR THIS QSO wass filled in with wat I want like a
special pfx or contest name .
I imported the adif file ,buth I see in the No
File - IMPORT/EXPORT
a window is open and click on adif
then file /export
another window is open and ive the file a name...
good luck Theo
on4ma
- Original Message -
From: "Vanderydt Theo" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, March 02, 2005 2:43 PM
Subject: [Dx4win] Export lo
Just tried in v 6.03 and there it is ok .States flag is resetted when
logging a new US station (never wkd)
not ok in 6.04
marc on4ma
- Original Message -
From: "Marc Wullaert" <[EMAIL PROTECTED]>
To: "DX4WIN List"
Sent: Saturday, February 05, 2005 7:34 AM
Su
Hi,
this morning a got something rare when logging USA stations.
The States flag in QSO window is not correct !
W0ZT is in MN Minnesota .This is a qso from 2002.
W0ZTL is in SD South Dakota . A new qso with W0ZTL (never worked)
the state stays in MN.I have to change that to SD.
Same with other one
Matteo
I changed the filters for this Talk messages window.Now it's open only if
somebody on my dxcluster geive me a Talk !
If a want to see other annoucements like WWV i open my paket window ;also
for answering my talks !
HNY
Marc on4ma
- Original Message -
From: "Matteo Campanella" <[EMA
It is almost 2 years a glitch !
No hard feelings guy's
Happy New Year 2005
- Original Message -
From: "Steve-KF2TI" <[EMAIL PROTECTED]>
To:
Sent: Friday, December 31, 2004 4:15 PM
Subject: Re: [Dx4win] report printing/landscape
> Thanks to Paul, Rick and Kurt. Seems I must h
Is working here ok !
on4ma
- Original Message -
From: "Radivoj KAR" <[EMAIL PROTECTED]>
To: "DX4WIN Reflector (E-mail)"
Sent: Tuesday, October 12, 2004 12:04 AM
Subject: [Dx4win] www.dx4win.com inavailable
> Tried to reboot PC and re-tried to access DX4WIN site. Each time I get
> re-di
you can change the radio file .
1) make first a copy off the radio file !
2)open the radio file in dx4win603/radios/icom756pro
loot at modes
[MODES]
AM=2;2;N
CW=3,7;3,7;N
FM=5;5;N
RTTY=4,8;4,8;N
SSB=0,1;0,1;Y
change rtty= 0,1;01;Y
save it.
start again dx4win and when you will click on a rtty spot
you could try to copy the old parameters in to the new one ...first copy
the 6.03 dx4win.ini on a other place ,
you never know
marc on4ma
- Original Message -
From: "Jay Hainline" <[EMAIL PROTECTED]>
To:
Sent: Saturday, May 22, 2004 9:53 PM
Subject: [Dx4win] psk31 tx hang up problem
W
What I do :
I backup my SAVE directory on to a cd and second HD.
Make a new complete install off dx4win.
Than copy the save directory in the new installation off dx4win/save
directory
works for me ...
73
marc on4ma
- Original Message -
From: "Steve GW4BLE" <[EMAIL PROTECTED]>
To: "DX4WIN"
its already in there !!
73/dx
on4ma
- Original Message -
From: "Joe Young" <[EMAIL PROTECTED]>
To:
Sent: Monday, January 19, 2004 8:51 PM
Subject: [Dx4win] Add a New County
> I would like to know how to add a new county name to the county database
in
> DX4WIN V6.
> The new county is Bro
check in preferences/rtty the type off interface =would be regular= and
comport
tcp/ip dont forget to save it.
in rtty window click right mouse button and internet connection ..choose
your dxcluster
wright ???
73/dx on4ma marc
- Original Message -
From: "Tom Johnson" <[EMAIL PROTECTED]>
T
you can easely write a new one.go to Preferences and File/write ini file .
you can change the path where the file have to be written !
73
marc on4ma
- Original Message -
From: "WC7N" <[EMAIL PROTECTED]>
To: "DX4WIN Group"
Sent: Wednesday, September 03, 2003 7:15 PM
Subject: [Dx4win] dx4w
happens sometimes .Not always running XP pro -dx4win 6.02
maybe it is the OS !!!
on4ma
marc
- Original Message -
From: "Richard L. King" <[EMAIL PROTECTED]>
To: "Rick Stoneking" <[EMAIL PROTECTED]>;
Sent: Thursday, July 10, 2003 6:36 PM
Subject: Re: [Dx4win] V6.02 question
> This
pse URL ...
tnx
- Original Message -
From: "Larry Alkoff" <[EMAIL PROTECTED]>
To: "DX4WIN" ; "R Hicks" <[EMAIL PROTECTED]>
Sent: Tuesday, May 27, 2003 5:56 AM
Subject: Re: [Dx4win] QSL/ADDRESS FILES
> Dick how is your QSL manager list used?
> Is it imported into dx4win.cty or used stand-
yes you can do it ,but you have to change the read mode from your radio !
are U using dx4win controlling a radio ?
wich one ?
73
marc on4ma
- Original Message -
From: "Cal Kutemeier" <[EMAIL PROTECTED]>
To:
Sent: Friday, March 21, 2003 5:28 AM
Subject: [Dx4win] Add new mode?
> How can I
this another freeware time clock
a.. Visit DS Clock home page in the Internet at
http://www.dualitysoft.com/dsclock/.
on4ma 73
- Original Message -
From: "Jim Reisert AD1C" <[EMAIL PROTECTED]>
To: "Dick Flanagan" <[EMAIL PROTECTED]>; "'REFLECTOR DX4WIN'"
Sent: Saturday, March 15, 2003 6:3
if you look in the archives ,there was a post some 2years ago
what you could change tho read correct the mode from a yaesu ft1000
maybe this could also help ...
73
on4ma
- Original Message -
From: "Victor West" <[EMAIL PROTECTED]>
To: "Victor West" <[EMAIL PROTECTED]>; "Erik Mellgren" <[E
Look with a texteditor like NOTEPAD for the file dw4win.tcp in your
dx4win/save directory
edit the text file erase what you not need and save it.
Be careful ,if the link is not working anymore you need a another one .Best
is to print this file
on paper or backup .You never now.
73
on4ma Marc
Take
Just installed dx4win 6.01 under Win XP pro dutch language.
ALT +S is closing down dx4win ??
When I merged my 5.03 dx4win .cty with the new one the program
was hanging at the qsl manager merge .When starting merging and at qsl
manager
it was very slow and after 51% it hangs ???
73
ON4MA Marc
DX
Give a visit to www.on5oo.com. On this page you find a telnetclient
program written by Jack ON5OO.This program is written for dx'ers and
contesters.In 1minute you are setup to connect a max of 50 dxclusters on the
internet.
You can download a trailversion. Now there is the possibilty to buy with
Dick,
I very good advise is to make backups from your log on a regular basis ( I
do weekly or direct after
a newone worked)
doing this will help you a lot.Imagine you have a HD crash !!
Make first a copy of your log file and some others dxw4in.cty and .cfg and
normaly
dx4win.ini (this file hel
You also could look at DXC (dxcluster concentrator )
visit and download a trial version at www.on5oo.com
in less than 1 minute you are installed and connected to
worldwide dxlusters on internet.Easy to share /link with
dx4win -writelog and others.
- Original Message -
From: "Ted Sarah - W8T
Hi,
There where some problems to download the program.The download link is
working now
and a new version is avaible.Also the tryout time is changed.Jacques ON5OO
is working now
to find a system for payment by creditcards.If you could help send him a
email.
Copied from the website :
The current ver
try www.on5oo.com or http://homeusers.brutele.be/on5oo/
is soud be working and downloading is ok via ftp server
73
marc on4ma
- Original Message -
From: "Milan Gütter" <[EMAIL PROTECTED]>00
To:
Sent: Saturday, October 12, 2002 11:09 AM
Subject: [Dx4win] ON5OO web page ?
>
>
> Hi all,
Hi ,
After several monts of beta testing a new cluster program is born
DX CLUSTER CONCENTRATOR by Jack ON5OO
features
a.. Easy to use and to configure
a.. Find worldwide spots
a.. Powerful filtering, build your own filter in a snap
a.. Spot archiving, useful for log correction after a contest.
a.
Mine says JAPAN .
on4ma
- Original Message -
From: "A. Sewell N5NA" <[EMAIL PROTECTED]>
To:
Sent: Sunday, September 15, 2002 4:34 AM
Subject: [Dx4win] 7J1AAI NOT Ogasawara
> My version of DX4WIN had 7J1AAI mapped as Ogasawara. >
did you did a upgrade or a clean install windows XP?
Reinstall dx4win if you upgrade and it will be working .
- Original Message -
From: "WL7M" <[EMAIL PROTECTED]>
To:
Sent: Saturday, September 14, 2002 11:14 PM
Subject: [Dx4win] Windows XP and CW Keyer
> Greetings DX4WINers..
test ...
Thats a hint for the next version off dx4win.A keep alive function or
autoconnect / autoreconnect for internet access.
marc on4ma
- Original Message -
From: "Gene A. Williamson" <[EMAIL PROTECTED]>
To: "DX4WIN (E-mail)"
Sent: Monday, August 19, 2002 4:28 PM
Subject: [Dx4win] RE: WinXP i
http://village.infoweb.ne.jp/~ja3thl/netdepc.htm
Netdepc is complete freeware telnet program
acces to 12 dxclusters (programmable) and
output to other computer/software.
enjoy it
marc on4ma
go to preferences
open paket2 window
in warning patterns place this line
KG6OK DE *:*
the others warning patterns you can change
to 1 asterix like www *
than is some talks to you a window will open.
73
marc on4ma
- Original Message -
From: "Wendell Wyly W5FL" <[EMAIL PROTECTED]>
To: "H
guy on4aoi is on holiday ,maybe he have no acces
to internet/email
- Original Message -
From: "Ted Sarah - W8TTS" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: "Guillermo Vazquez C." <[EMAIL PROTECTED]>;
Sent: Saturday, July 06, 2002 4:05 PM
Subject: Re: [Dx4win] Web Update
> Don't
My friend ON5TN Karel have some little problem with dx4win and
his 756 pro.Every time starting dx4win ,the program can not find
the rig.Radio time out ,and then he have a windown "Error in module dx4win
5cx etc etc"
After dx4win is running and do a "Start radio" it is working.Whe even tried
Steve, Brad and Duane
A fresh Win XP professional is installed here ,and I can only use LPT1 for
cw keying.
LPT 2 is installed but do not work for keying.
If someone have a fix let me know.
Marc ON4MA
copy this one also to your list
on0dxk-5 194.7.17.54:8000
this is the Kortrijkse dxcluster
Hi,
I lost my cordinates for vp6di.I got a crash and have install a fresh
dx4win 5.03 and merged my dx4win.cty file.
Vp6di is not imported correctly showing as Pitcairn Island.
The vp6di webpage is not working 100%.
Any help for the cordinates .
Thanks
Marc on4ma
HI,
probely already spoken ,but did nit find archives from dx4win.
I installed Windows XP (new install ,no upgrade) a fresh install of dx4win
5.03.
But the cw on the lpt 2 (pci board ,already have the new xp driver) does not
work.
No cw output.I thaught there is a solution ,but dont find it .
Any
John,
I think the best way is to reinstalling dx4win.IF that's is ok ,I will help
you to enter ducie in that list ...
what say ?
FROM THE DESK OFF ON4MA
MARC WULLAERT
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Phone 032-0476/33.58.70
- Original Message -
From: "n3dr
FROM THE DESK OFF ON4MA
MARC WULLAERT
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Phone 032-0476/33.58.70
- Original Message -
From: "Robert L. Gill" <[EMAIL PROTECTED]>
To:
Sent: Sunday, March 03, 2002 12:09 PM
Subject: [Dx4win] Return Address Labels
> Hello A
I checked here and it showing as pfx GD.
FROM THE DESK OFF ON4MA
MARC WULLAERT
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Phone 032-0476/33.58.70
- Original Message -
From: "wo2n" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, February 12, 2002 1:31 AM
Subject: [
92 matches
Mail list logo
