control via a pull down tab click
Ok, now I can pinch myself and wake up from my day dream.
73 Saad N5FF
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Saad Mahaini
Sent: Wednesday, May 27, 2009 1:56 PM
To: 'Neal Campbel
What will be really nice is to have a pull down menu on the main screen
where you can choose a radio on the fly, while you can specify multiple
radios in the program setting as to what radio is hooked up to what serial
port, etc.
This will enable the DX4WIN to work with more than the two radios l
It will be nice to be able to choose COM ports above COM8, as we are now
limited to COM1 to COM8 in DX4WIN. 73 Saad N5FF
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Dick Flanagan
Sent: Wednesday, March 18, 2009 12:55 PM
Folks, speaking of adding serial ports, I have an extra byterunner 8 ports
serial board that plugs in the computer and adds 8 more serial ports to your
computer so you can control radios, rotors, TNCs, etc. This board currently
sells for $150 ,
http://www.byterunner.com/byterunner/product_name=PCI
Byterunner PCI serial card PCI-800H in like new condition, with the spider
cable, software, and documentation. This will plug into your PC and adds 8
more serial ports, so you can use to control your rigs, antennas, TNC, etc.
I will ship it for $100. 73 Saad N5FF
This may not be the same that you are experiencing, but I figured I will put
it out there.
I have never seen this for all the years that I ran DX4WIN till recently. I
have changed various things at the same time so that makes troubleshooting a
lot harder. However, I only see this when one of th
How can you run multiple sound cards in the computer? tnx Saad N5FF
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mel Martin
Sent: Tuesday, November 12, 2002 10:17 AM
To: [EMAIL PROTECTED]; 'Gert E. Janssens'; dx4win@mailman.qth.net
Subject: Re: [Dx4win]
Bracklow wrote:
>
> I'll second that motion!! With all the devices being in use today, Dx4Win
> really limits you with only Comports 1 & 2.
>
> Ron, N6PWW
> - Original Message -
> From: "Saad Mahaini" <[EMAIL PROTECTED]>
> To:
> Sent: Monday,
Hopefully, the new release will support more Com ports ie 1-10 or more vs
1-8. 73s
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jeff Baker
Sent: Sunday, May 19, 2002 6:26 PM
To: dx4win@mailman.qth.net
Subject: RE: [Dx4win] DX4Win new release?
I hope the
Hello,
I just switched my TTY setup from the AEA PK-232MBX/DSP to the HAL DXP38
TNC.
The old TNC worked fine with both AEA software and DX4WIN.
The new TNC works fine with the HAL software that comes with it, but I just
can't get it to work with DX4WIN. I changed, confirmed, played with,
reconf
10 matches
Mail list logo
