On 2018-12-16 8:16 AM, Ernie wrote:> Mark,
>
I have been using LP-Bridge to make all of the radio control stuff
play nice with my Yaesu for quite a while. Unfortunately it doesn't
list Icom as being supported, so probably not any help for you. If
DX4WIN would work with OmniRig, we would have ano
Mark,
I have been using LP-Bridge to make all of the radio control stuff play
nice with my Yaesu for quite a while. Unfortunately it doesn't list Icom
as being supported, so probably not any help for you. If DX4WIN would
work with OmniRig, we would have another solution.
Another alternative
On Sat, 15 Dec 2018 15:32:48 -0800, Mark Weiss via DX4WIN
wrote:
>I've used DX4WIN for many years. It controls my IC-7800 perfectly, as
>expected.
>
>Now I'd like to also be able to control my transceiver by WSJT-X, as well.
>
>The problem is that they both fight for control of the rig. DX4WI
Hi Mark,
Long time no see. Hope all is well.
I don't know of a way to have two programs control the same rig as the rig only
has one port.
Unless you can configure the CI-V for one port and the serial for another?
My Work around is Start WSJT-X first, as that is sensitive and will complain as
I've used DX4WIN for many years. It controls my IC-7800 perfectly, as
expected.
Now I'd like to also be able to control my transceiver by WSJT-X, as well.
The problem is that they both fight for control of the rig. DX4WIN usually
wins and WSJT-X presents me with an error message.
Does anyon
5 matches
Mail list logo
