I have been following a thread on the RTTY reflector about ZD9 calls. When I
checked my "reports" file I found this problem:
ZD9SXW - worked 4 times in 1993
Bands worked = 18 - 28 - 7 - 24 MHz
When I got to "reports" - "DXCC" - "all" and zoom down to ZD9, I find
this -
It has my 7
Uncheck "Print Method Labels" in the Print QSL Labels box.
John, K2CIB
- Original Message -
From: "Paulini Kenn Cont AFRS/RSISQT" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, January 07, 2004 2:48 PM
Subject: [Dx4win] Help
> I am having problems printing label
At 02:48 PM 1/7/2004, Paulini Kenn Cont AFRS/RSISQT wrote:
>I am having problems printing labels. Whenever I mark a QSO and then print
>the label (after saving!), I get one lable that says "Method = Buro". This
>wastes two labels as it skips one and one has the message on it. Any ideas
>how to g
I am having problems printing labels. Whenever I mark a QSO and then print
the label (after saving!), I get one lable that says "Method = Buro". This
wastes two labels as it skips one and one has the message on it. Any ideas
how to get the message to stop printing?
73 de W5KAP
Kenn Paulini
Sof
Hello all,
I have a user who is Japanese and for as bad as his English is, it's 100%
better than my Japanese.
I am having a real issue on explaining how/where to put his license key.
Anyone out there who can help me by emailing him direct on my behalf?
73 de Steve, NR4M
Hello all,
Have a DX4WIN user who also uses PacTerm and would like to know how it all
sets and works together.
Some version of PacTerm was modified so it could communicate to DX4WIN,
without any real modification to DX4WIN. My point is since the interface
really happens on the PacTerm side, I
On 10 Oct 2003 WA9ALS - John wrote:
> Seems like I have 2 challenges:
>
> 19950903 080300 AI4W 291
> RTTY
>
> 40m 599 599 5 N
>
> Error:Mode=PTOR James|Nokesville, VA
>
>
> 1. I have 22 QSOs labeled as being in RTTY mode by DX4WIN. RTTY appears as
> the mode in the mode box and as the ent
Seems like I have 2 challenges:
19950903 080300 AI4W 291
RTTY
40m 599 599 5 N
Error:Mode=PTOR James|Nokesville, VA
1. I have 22 QSOs labeled as being in RTTY mode by DX4WIN. RTTY appears as
the mode in the mode box and as the entry in the ADIF. However, in
the comments box, there is an err
TG9AJR Juan Carlos Munoz wrote:
>I need to delete several QSO's from 1 until 5327 but can't seem to be
>able to get it done at once.
>
If you're running 6.02, it's very simple: make sure only these 5327 QSOs
are displayed (filter them if necessary), then go to QSO menu ->
Multiple QSO Operations
Hi you all,
This question might sound silly, but read the help and can't get it done !
I need to delete several QSO's from 1 until 5327 but can't seem to be
able to get it done at once.
Your advise is very much appreciate, regards.
Juan Carlos Munoz
TG9AJR
[EMAIL PROTECTED]
Hi all,
after "Save Changes" in the "Setup Parameters" window my 6.02 signalize
"Acces violation at address 004BF0E2 in module 'DX4WIN.EXE'. Read address
007D."
When click OK, I'am unable to Save Changes, only Cancel Changes works.
Who can help, what happends?
Using WindowsXP.
73!
Milan,
, W3UR
--
Bernie McClenny, W3UR
Editor of The Daily DX, The Weekly DX and How's DX.
http://www.dailydx.com
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Bernie McClenny, W3UR
Sent: Friday, July 25, 2003 20:20
To: dx4win@mailman.qth.net
Subject: [D
ON4AOI usually maintains an up-to-date database on his DX4WIN web site:
http://users.skynet.be/ON4AOI/dx4win.shtml
However, he hasn't done an update since early this year.
I will send him the additions early this week so he can update his database. I
need them also.
73 - Jim AD1C
=
Jim
I am running DX4WIN version 4.07. How do I add new IOTA reference
numbers? I have looked both in the help file and on the Website and
sent a request (yesterday) to support. But as of the moment I can't
figure it out!
TIA
Bernie, W3UR
--
Bernie McClenny, W3UR
Editor of The Daily DX, The Weekly
Since upgrading to DX4WIN 6.02 I can't get it to work with my Icom 756. =
I=20
have two radios a Yaesu FT-920 and the Icom 756. The FT-920 works fine=20
BUT with the 756 I keep getting a Radio time out message.
I am running Windows XP Professional and the Icom is the IC-756, NOT the =
Pro or Pr
I'm having trouble getting my rig to TX. I have a FT1000MP, I have G3LIV,
ISOTERM-RL interface made for the MP as it needs a DIL relay for TX.
There a 4 leads attached, 1 lead to LINE IN, 1 lead to LINE OUT on the sound
board, the other end has a 5 pin connector which I connected to the packet
ecified. It seems as the S-meter data is not interpreted by DX4WIN,
scanning and frequency update is running OK.
73 de Erik/SM0JCA
- Original Message -
From: "Marc Wullaert ON4MA" <[EMAIL PROTECTED]>
To: "Victor West" <[EMAIL PROTECTED]>; "Erik Mellgre
L PROTECTED]>; "Erik Mellgren" <[EMAIL PROTECTED]>;
; "Steve Bookout" <[EMAIL PROTECTED]>
Sent: Saturday, March 01, 2003 2:14 AM
Subject: Re: [Dx4win] Help: Yaesu FT-897 CAT control not communicating with
DX4Win
> To add a bit more, I noticed that DX4WIN reads S
/28/2003 -0600, Victor West wrote:
>I too am waiting for a driver for the FT-897.
>
>de Vic, AE5DX
>
>
>- Original Message -
>From: "Erik Mellgren" <[EMAIL PROTECTED]>
>To:
>Sent: Thursday, February 27, 2003 4:25 PM
>Subject: [Dx4win] Help: Y
]>; ; "Steve
Bookout" <[EMAIL PROTECTED]>
Sent: Friday, February 28, 2003 7:09 PM
Subject: Re: [Dx4win] Help: Yaesu FT-897 CAT control not communicating with
DX4Win
> Tnx Steve
>
> Just tried it and it appears to work fine. Reads band and mode OK from
the
> rad
Vic, AE5DX
- Original Message -
From: "Steve Bookout" <[EMAIL PROTECTED]>
To: "Victor West" <[EMAIL PROTECTED]>; "Erik Mellgren" <[EMAIL PROTECTED]>;
Sent: Friday, February 28, 2003 6:24 PM
Subject: Re: [Dx4win] Help: Yaesu FT-897 CAT control not c
I too am waiting for a driver for the FT-897.
de Vic, AE5DX
- Original Message -
From: "Erik Mellgren" <[EMAIL PROTECTED]>
To:
Sent: Thursday, February 27, 2003 4:25 PM
Subject: [Dx4win] Help: Yaesu FT-897 CAT control not communicating with
DX4Win
> DX4WIN has no r
DX4WIN has no radio setting for my Yaesu FT-897 rig. How do I get it to =
work?
Other programs like FTBase, TRX-Manager and YP-log (FT-817 setup) is =
working 100 percent OK with my FT-897 rig.
Erik/SM0JCA
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (te
I just installed version 6.02 on my computer and all seems to be ok except I
cannot bring up the help menus. I m using Windows 95. The file in the root
directory looks like an HMTL file whereas with the 5.02 version it wasn't.
How can I get it to work?
Tom
ROTECTED]>
To: "Reflector post DX4WIN"
Sent: Friday, December 27, 2002 5:00 PM
Subject: [Dx4win] Help again
> My DX4WIN program may be corrupted. Several of you told me how to
uninstall
> the program with UNWISE.EXE . Also I was told that this would not
removey
> my data files co
My DX4WIN program may be corrupted. Several of you told me how to uninstall
the program with UNWISE.EXE . Also I was told that this would not removey
my data files containing over 24,000 QSO's. Correct ??
Question is, what is the best way / how should I reinstall the program ? I
still have th
Please disregard my last message, I fixed it using the
backup document files!
Thanks and 73
Bill Maddock N4ZI
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
The reason this message is shown is because the post was in HTML
or
I was running contest this weekend, changed the clocks back, but used =
the precision time web site and the computer had the right time shown =
but listed it as GMT
in Windows. When I went to log in DX4Win tonight I noticed that the log =
showed - 6 hours - I over road it and saved it and crashed
David,
1. The file name you use can be anything you like, so that is not a good choice
to put on a label. But from the on-line help: (text in a greeting line)
A %% (two percent characters) will be replaced by the group name that
corresponds
to the group number for the QSO printed.
See also Gr
BlankI am new to DX4WIN, and have some queries on producing labels for the
calls I look after, I have successfully printed labels, so they are
refinement issues:
1) User preferences has a field for "greetings" message - i.e. the 73 de
. Is there a way to configure this to the call used in t
hi the name here is phil and i am trying to get psk31 to work.i have a
kenwood 570 and a rigblaster and the last rev. of dx4win. with a dell 1.7 gh.
comp. i have rtty working ( mmtty program ) but i can only copy junk and i
can key the transmitter but i have no power output ? i am at a loss now
I just purchased the piexx upgrade for the kenwood ts930s. Could someone who
has the 930s and the dx4win log system give me the parameters for
interfacing the two.
thanks
john
soft and related stuff at
http://users.skynet.be/ON4AOI/dxt.shtml
MY SALESPAGE with radioamateur & computer parts
http://users.skynet.be/ON4AOI/sale.shtml
- Original Message -
From: "Pete Smith" <[EMAIL PROTECTED]>
To:
Sent: Thursday, August 22, 2002 12:03 PM
Subject: [
Last night, after working ZK1SCQ in the middle of the night, I went back to
bed leaving DX4WIN 5.01 running in the background. This morning, when I
bought it back, there was an error message on the screen about an exception
having occurred. I shut the program down and restarted it. It told me
My friend ON5TN Karel have some little problem with dx4win and
his 756 pro.Every time starting dx4win ,the program can not find
the rig.Radio time out ,and then he have a windown "Error in module dx4win
5cx etc etc"
After dx4win is running and do a "Start radio" it is working.Whe even tried
2002 9:43 PM
To: RCARIELLO; Dx4win@mailman.qth.net
Subject: Re: [Dx4win] Help Error Msg w/ AMD Computer
Rich,
I thought you had to reinstall windows when you changed motherboard; maybe
others can confirm this.
Paul
At 11:31 AM 5/30/02 +, RCARIELLO wrote:
>Hello to all,
: [Dx4win] Help with Logic 2.1 log file
Hello all,
A fellow is trying to convert his log from his old program to DX4WIN format
and what he is sending me, I can't work with. (I don't have any special
tools or utilities for working with different file formats, etc)
The files are from Log
At 09:42 PM 5/30/02 -0400, Paul van der Eijk wrote:
>Rich,
>
>I thought you had to reinstall windows when you changed motherboard; maybe
>others can confirm this.
Not necessary with Win98SE, at least -- I have done 3 different motherboard
transplants.
73, Pete N4ZR
Check out the World HF
Cont
Rich,
I thought you had to reinstall windows when you changed motherboard; maybe
others can confirm this.
Paul
At 11:31 AM 5/30/02 +, RCARIELLO wrote:
>Hello to all,
>Sending this message for a friend
>Running Win4DX version 4.07.
>Just upgraded the computer to a AMD 1Gig w/112Meg Ram.
>Run
ttle to do with
DX4WIN and a lot to do with the initial computer set up and software
installation.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of RCARIELLO
Sent: Thursday, May 30, 2002 6:31 AM
To: Dx4win@mailman.qth.net
Subject: [Dx4win] Help Error Msg w/ AM
Hello all,
A fellow is trying to convert his log from his old program to DX4WIN format
and what he is sending me, I can't work with. (I don't have any special
tools or utilities for working with different file formats, etc)
The files are from Logic version 2.1 and are in a .dbf format, which
Hello to all,
Sending this message for a friend
Running Win4DX version 4.07.
Just upgraded the computer to a AMD 1Gig w/112Meg Ram.
Running Windows 98 second edition.
Put the hard drive from the old computer into the new machine.
All the other programs seem to be working OK.
Getting Error Access Vi
In trying to get my DX4WIN dx list to agree with my ARRL DXCC list I have
found a few calls that ARRL has given me credit as confirmed, but DX4WIN
does not have anything in the list. No C, M or W. This happened when I
moved the WJ2O file to DX4WIN. DX4WIN only recognized the confirmed dx if
che
After a harddisk crash, I've reinstalled DX4Win but when I attempt to read
my backup file from diskette I get the dreaded "a fatal error occured
reading the logfile" message when I try to open it.
Arrrggg! I'm in panic mode since this file represents ten years of dxing
and
contesting efforts i
hi phil here, i am a new user to dx4win ( real new ) and need help to setup
rig control. i have just about run out of ideas. my set up is kenwood
570d,rigblaster, a 8200 dell with lots of meamery, and am runing "me'"program
i am not that great with a coputer so if you can make it simple it would
I am consolidating a bunch of old electronic contest logs for NK7U into
DX4WIN. I have got all of them done but a handful and could use some
thoughts and advice on these last few. They were all created in 1990 and
1991 and are of two types:
* .SAV files. This appears to be a binary file of some so
Send PayPal donations to; [EMAIL PROTECTED]
- Original Message -
From: Rick Tyler <[EMAIL PROTECTED]>
To: Roger Borowski <[EMAIL PROTECTED]>
Sent: Friday, January 25, 2002 11:35 AM
Subject: Re: [Dx4win] Help K3TKJ Keep QTH.NET Going
> Be glad to transfer a few b
Subject: Help K3TKJ Keep QTH.NET Going
I saw the following on another qth.net reflector:
Today has not been a good day for me. I am totally bummed out.
Other than the technical things with the servers, much of my time is spent
trying to find creative ways to finance what we do and not make it
c
At 09:34 AM 1/20/02 -0500, you wrote:
>Pete,
>
>I do not recall rejecting your message nor does it show in the archives,
>strange,
>
>Paul
>
>PS Why don't you post a message with 'help' in the subject again, so we
can see what happens
OK -- here's a test, header just like the other one. I *am* su
I take the lack of response to my cry for help as an indication that I
really did a bad one.
Fortunately, I appear to have lucked out. I had crashed the computer with
DX4WIN open just before I wrote all those QSL dates, and the backup file
only had 3 more QSOs than its predecessor. I had renam
301 - 350 of 350 matches
Mail list logo
