Thank you all for the help with my CT-V. I replaced the Max232CEP chip
with a holder and a new chip and the unit works. (It had stopped keying
the rig.) I bought a spare chip 'just in case'. Replacing it was not
difficult but working in tight quarters made me a bit nervous.
Thanks again,
Lou, AA1
Original Message-
Reply-To: <[EMAIL PROTECTED]>
From: "Mel Martin (VE2DC)" <[EMAIL PROTECTED]>
To: "'Gregory Brown'" <[EMAIL PROTECTED]>,
Subject: RE: [Dx4win] ICOM 765 !
Date: Tue, 31 Dec 2002 20:19:46 -0500
If you added up the cost of the componen
PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Gregory Brown
Sent: December 31, 2002 6:05 PM
To: dx4win@mailman.qth.net
Subject: RE: [Dx4win] ICOM 765 !
Lou,
I don't have any experience with the interface you are considering, but
I did have (apparently) the same problem with my CT-17 and face
Lou,
I don't have any experience with the interface you are considering, but I
did have (apparently) the same problem with my CT-17 and faced the same
quandry. My choice was to assume that the MAX232 chip in the CT-17 was
fried (the IC is about the most "fragile" component in there) and decided t
I had originally reported ( a few weeks ago and got excellent advice off
the reflector) that my CT-17 (CI-V) would not key my IC-765 using
DX4WIN. I borrowed a CT-17 and tested with that unit, and it worked. The
problem is that my CT-17 no longer works. There is no visible damage to
the interior of
are a grate cw operator
gilles ve2lx
---
- Original Message -
From: "Floyd Sense" <[EMAIL PROTECTED]>
To:
Sent: Saturday, November 23, 2002 9:36 AM
Subject: [Dx4win] Icom 765 mod
When DX4WIN sets the mode on my 765 as the result of mousing on a DX spot
for a CW station, the mode is set to CW OK, but with the wide filter.
Anyone know if the rig is capable of having DX4WIN select the narrow filter
at the same time, and what is the change required to do that? Thanks.
K8AC
Fl
ECTED]>
To:
Sent: Thursday, November 21, 2002 11:09 PM
Subject: [Dx4win] ICOM 765 interface issue
> I have an ICOM 765 that used to work with DX4WIN 4.08 and my last computer
> running NT 4.0
>
> I still have the ICOM 765 but changed computers and upgraded to 5.03. I
> still run
I have an ICOM 765 that used to work with DX4WIN 4.08 and my last computer
running NT 4.0
I still have the ICOM 765 but changed computers and upgraded to 5.03. I
still run NT 4.0.
My problem is that I can no longer get the computer to key the rig when
clicking on a DX spot. If the radio is 'St
9 matches
Mail list logo
