I had a similar issue were only the primary IP would ping and none of the alias
IP’s would respond.
Work Around:
I changed the primary IP to one of the alias IPs and cleared out the other
alias. Each IP had to be added as the primary by itself first to create the
rules.
After adding them using
09:53 proxy_server clamd[23177]: Not loading PUA
signatures.
Feb 14 17:09:53 proxy_server clamd[23177]: Malformed database
I checked disk space but there's a lot free space.
Problem seems to be in databases, but don't know how to fix them.
many thinks for your help.
Bye, Claudio.
Il 14/02/2
Can you verify that logging is turned on in the HTTP Proxy page and then stop
and start the HTTP Proxy? This should generate some type of log entry's.
If it doesn't, do a tail -f /var/log/messages to see if there are any usefull
messages being logged while you attempt to stop and start the Prox
Claudio,
What messages are in the /var/log/squid/squid.out log file? Check the
/var/log/havp/havp.log as well.
-Original Message-
From: Claudio Roberti [mailto:crobe...@inwind.it]
Sent: Saturday, February 12, 2011 4:06 AM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] Error
Looks like there was an issue with the daily.cvd that ClamAV pushed out at
about 4:00 PM EST. The 7:00PM version of the file is ok to use and your Endian
firewall should automatically update every hour.
If it doesn't:
1. Delete or rename the daily.cvd file located in the /usr/share/clamav
I had the same problem with 2.2 RC3. I ran the upgrade and it fixed it:
1. Enable SSH access on your firewall
2. Open a Putty SSH session
3. rpm -ivh http://updates.endian.org/upgrade.rpm
4. efw-upgrade
5. Please choose the appropriate channel for your environment
: Re: [Efw-user] Endian Spam Problem
No!
I think this is a good way:
sa-update -D
tar zcpvf spamassasin-endian-old.tar.gz /usr/share/spamassassin/
cp /var/lib/spamassassin/3.002005/updates_spamassassin_org/*
/usr/share/spamassassin/
Z.
2010/3/23 John Marotta :
> So is the correct command:
>
So is the correct command:
"sa-update -D mv /usr/share/spamassassin/*
/var/lib/spamassassin/3.002005/updates_spamassassin_org/*"
Please advise.
Thanks!
-Original Message-
From: Zola [mailto:jz...@freemail.hu]
Sent: Tuesday, March 23, 2010 5:44 AM
To: efw-user@lists.sourceforge.net
Subj
You must look at the SMTP log. It will tell you why the Postfix service can not
deliver the mail. This is under, Logs (from top menu), Proxy (from side menu),
then SMTP.
From: jonas kellens [mailto:jonas.kell...@telenet.be]
Sent: Saturday, December 26, 2009 1:44 PM
To: EFW
Subject: [Efw-user
/2009 12:25 PM, John Marotta wrote:
> Jonas,
>
>
>
> You have to run thru the Network Wizard and select the 2 ETH interfaces
> you want to use.
>
> You must add the IP address in the “Add additional addresses” box
> including the CIDR.
>
>
Ahh cool that's
Jonas,
You have to run thru the Network Wizard and select the 2 ETH interfaces you
want to use.
You must add the IP address in the “Add additional addresses” box including the
CIDR.
From: jonas kellens [mailto:jonas.kell...@telenet.be]
Sent: Wednesday, December 23, 2009 12:07 PM
To: EF
Steve,
Putty into the firewall from it's green IP and goto /var/efw/uplinks.
Here you will find a separate folder for each uplink. Check the settings
file for each uplink and make sure that no 2 are using the same ETH
device.
If you need to remove the uplink, delete the whole folder. If you delet
Create a rule under Firewall/System access to allow ICMP Protocol from certain
IP's.
-Original Message-
From: Marco Aurélio [mailto:maure...@spin.com.br]
Sent: 09/29/2009 10:15 PM
To: efw-user@lists.sourceforge.net
Subject: [Efw-user] How to enable ping from red in the EFW 2.2?
Hi,
Some questions for you:
* Is the HTTP Proxy ON or OFF? Sometimes you have to flush the cache or
restart the HTTP proxy if it's ON.
*Are both internet connections defined as Uplinks under Network -->
Interfaces?
* Make sure both uplinks are set to be managed and have the correct DNS
servers for each
Caizi,
I have a similar setup. I have my users on the Green network and put the
servers which are accessed from inside and outside on the Orange
network.
As long as your EFW has 3 NIC cards, you should be able to set this up
with no problem. Make sure you allow access from the Orange network to
t
Is the port forwarding being done on the primary Red IP or an alias IP?
-Original Message-
From: Caizi [mailto:ca...@seznam.cz]
Sent: 07/18/2009 12:14 PM
To: efw-user@lists.sourceforge.net
Subject: [Efw-user] NAT Loopback change in Endian Firewall 2.2
Please does somebody know why there
Certain AMD dual core processors and mother board chipsets had the same
issue. The Watchdog would create system log entries show that the links
would go up and down or it would always be renegotiating the port speed.
Forcing the port speed would slow the problem down but it would not get
rid of it.
I had this issue with certain NIC cards and some AMD chipsets. Went to Intel
only to avoid this.
-Original Message-
From: jeffrey steve borbon sanabria [mailto:siste...@fenusa.com.co]
Sent: 06/27/2009 10:30 PM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] Network interfaces
Try to turn off the HTTP Proxy. This worked for me.
-Original Message-
From: Centeno [mailto:cent...@rogeriocenteno.info]
Sent: Wednesday, April 08, 2009 7:49 AM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] static routing with two links
HI,
I´m still need help
[
Vassilis,
I have been using EFW with multiple RED interfaces for some time. I can
not answer all of your questions, but the fail over configuration does
work pretty good provided both links 1 and 2 are set to be managed and
link 1 is set to start link 2 if it fails. Link 2 should not be set to
sta
20 matches
Mail list logo
