~~~
N2CQ QRP CONTEST CALENDAR
August 18 to Sept 19, 2005
~~~
Summer FOX Hunt - QRP 20M CW
UTC: Every Fri thru August 19, 0100z to 0229z
EDT: Every Thur thru August 18,
Does anyone know what the power supply requirements are going to be for
the elecraft amp when it is ready for sale?
I have to replace mine now and figure I might as well buy one big enough
to handle it as I plan to get one when it becomes available.
___
#1204 is up and running without too much difficulty, other than the
builder making a "rosin joint" at one of the relays which was quickly
resolved. I made a few contacts up to 1500 miles away on 10 and 14 MHz,
using 1.5 watts (internal batteries) and a Barker & Williamson AC 1.8-30
broadband anten
Is there an update on when the first new QRO amplifier will be available? Roy
Morris W4WFBNo virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.12/75 - Release Date: 8/17/2005
___
Elecraft mailing
I seem to remember that it weighed a ton or two - either it had a dirty
great big PSU built in or my mind is off on a jaunt of its own again. Looked
absolutely brilliant, drool factor was very high.
Simon Brown
---
www.hb9drv.ch www.laax.ch
RSGB HF Convention: Friday 7th - Sunday 9th October 2
If I remember correctly the power supply is included. It is a switching
supply. With the smaller amp it is built-in. With the larger amp it is
external.
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Simon Brown (HB9DRV)
Sent: Thursday, August 1
I'm building a K1 to go with my K2 and KX1! The receiver is working and
aligned, but I have a question about BFO alignment. I usually use a side
tone pitch of 700 Hz, but I don't seem to be able to adjust the BFO trimmer
c20 to get that high a note centred in the filter pass band. Am I aiming for
t
Thanks everyone I have the answers I need and I am now planning to
purchase an rs50m for my shack
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David
Sent: Thursday, August 18, 2005 9:37 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] New amp
Does
David wrote:
Thanks everyone I have the answers I need and I am now planning to purchase
an rs50m for my shack
---
A few things to consider:
1) A 20 amp power supply will run the K2/100 with current to spare. My
K2/100 runs 16 to 18 amps from my Astron 20M.
2) Large supplies
North American SSB QSO Party (NAQP) this Saturday.
Great for QRP and QRO. 12 hours (operate 10 hours
max)and all 50 states will be on including all VE's
and more. Fun contest. All bands 10 thru 160 (no
WARC), exchange is Name and state/provence. Starts @
1800 UTC.
73 and CU on the bands,
Art W
Ron D'Eau Claire wrote:
David wrote:
Thanks everyone I have the answers I need and I am now planning to purchase
an rs50m for my shack
---
A few things to consider:
1) A 20 amp power supply will run the K2/100 with current to spare. My
K2/100 runs 16 to 18 amps from my Ast
For people who receive QST Magazine each month, you can see on page
20 a photo that I did last june on top on Mt Hereford. I very proud
of it. I have not received my magazine yet, but someone from the
States told me the good news this morning !!!
I was using my K2 and my Buddipole that day
I now have taken the advice offered to use Spectrogram - why didn't I think
of that? D'oh!!!
I can now see the filter pass band and move the peak around using c20, but I
can't get the pass band centre anywhere near 700 Hz, perhaps only 450-500Hz.
This seems a bit low. Where should I look, or do I j
Craig,
this comes up from time to time. Check the speaker mounting for the screws
being overly tight and distorting the speaker frame. Or check that the
frame is not bent or warped. You have to dismount the speaker to check
that.
Don't overly tighten the speaker mounting screws when you repl
Jean_Francois,
Very nice. I bet the inverted-vee was very effective at that location.
Steve, W2MY
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of JEAN-FRANCOIS MENARD
Sent: Thursday, August 18, 2005 2:39 PM
To: Elecraft - Maling List
Subject: [Elecraft]
Not to take issue with Ron's comments... they are all appropriate, however
one thing I think which may have been missed, or at least glossed over, is
the fact the Astron supplies include a very good FOLDBACK CURRENT LIMITING
circuit which, if directly shorted (e.g. HOT lead directly to GND) will
One of the best contest there are...NAQP anything.
Come join the fun. I will be on.
Remember - Leroy KS
Lee - K0WA
Common sense is in short supply - get some and use it.
If you can't find any common sense, ask for help from
somebody that has some common sense. - Lee Buller
Just remember, for NAQP, QRO means 100 watts max. Anything over gets
thrown in the check log category.
Also, for DX, only the name is sent.
Come join us! And watch for W6FB, even with my poor antennas...
On Aug 18, 2005, at 11:04 AM, Art - W6KY wrote:
North American SSB QSO Party (NAQP) thi
Tom wrote:
one thing I think which may have been missed, or at least glossed over, is
the fact the Astron supplies include a very good FOLDBACK CURRENT LIMITING
circuit which, if directly shorted (e.g. HOT lead directly to GND) will
instantly reduce the output current (and the voltage) to nearly
That's what I have done here. I have a 20 amp VJ Products and a
RS-35 Astron. I have them in parallel and fed in to a home brewed
distribution box. I had often wondered if the difference in current rating
would create any problem. Also, I have never checked to see if they both
have exactly
I know I'm preaching to the choir here but once again Elecraft has proven
they have the best customer support in the world!
After a recent portable operation with my K2 and KPA100/KAT100 in an EC2 I
returned to find that the K2 would no longer control the amp and tuner. A
quick swap of the QR
Stan,
If the voltages are ALWAYS exactly the same, you could be OK, but if the
voltage sags on either supply, the one with the higher voltage will try to
feed into the lower voltage supply just as if it were another load. What
happens next depends on the exact power supply design. I would surmis
-Mike said:
What other company provides such service. Outstanding! They truly are the
best in the world for customer service.
--
I have to second that! Probably along with 5000 othe
Good Day everybody!
Please note that the BUBBA contest was inadvertently scheduled in a
manner that conflicted with the 2005 running of the SK Memorial Contest.
The organizers of the BUBBA event have apologized and modified their
contest exchange to match the exchange of the SK Memorial Contest.
For Those of You Who Ordered Our K2 After-Factory Accessory Kit ...
W E A R E N O W S H I P P I N G !
Except for international deliveries (which may take up to a week to
arrive) everyone else should have their kits by Monday. Those of you
who ordered the "Boards & Parts"
25 matches
Mail list logo