JEAN-FRANCOIS MENARD wrote:
I would like to know if the OTT (One Touch Tune) from W4RT works with
the T1 ???
Yes.
However, the T1 does not require a constant carrier for tuning. Once
you've matched the antenna on all bands using the T1, you can re-tune
from the T1's memories using intermi
Fred Jensen wrote:
A big thanks to all who provided information and ideas on the "POW
Radio" project. FWIW, I learned a few things:
We're going to use a 1N34A and do a little tap dance around the razor
blade issue in the introduction.
73, and thanks again,
Fred K6DGW
Auburn CA CM98lw
Hi,
I would like to know if the OTT (One Touch Tune) from W4RT works with
the T1 ??? Seems to have the same connector... i already own a Z-100
from LDG and the OTT with my Ft-817... I would like to change my
Z-100 with a T1.
Thanks.
=
/¯\/¯\/¯
Hi Folks:
Let me be a bit more specific here... I need a high-res cans of just the
back (rear) side an UNBUILT (and unpopulated) K2 bottom heatsink panel, NOT
a scan on one which has already been assembled sorry for any confusion
this might have caused...
Original posting follows...
---
Hi Folks:
Old weird Tom here again with another off-the-wall request.
For some documentation I'm writing, I need a hi-res scan of the back (rear)
side of the newer version K2 bottom heatsink panel... the part which shows
the holes and nomenclature for all of the connectors.
Before everyone o
MC:
We are either at or near the minimum of the sunspot cycle. Depending on
whose projections you believe, we're there right now, or will be there
within the next year. Since there is considerable weekly/monthly
fluctuation in sunspot activity it will not be until maybe two years from
now tha
The rules are pretty clear, what ever stations you run, free ones included,
the highest power run determines the class of operation. If in battery
class all stations have to be on battery at 5 watts!! No exceptions.
I have always thought that the arbitrary 5 watts for both CW and phone modes
w
A big thanks to all who provided information and ideas on the "POW
Radio" project. FWIW, I learned a few things:
1. The razor blade radio was actually called the "Foxhole Radio." One
response explained that the "POW Radio" was really a 1-tube regen (that
may be the next class project if I c
Thanks - that will be excellent !
Simon Brown, HB9DRV
www.hb9drv.ch, www.laax.ch
- Original Message -
From: "Eric Swartz - WA6HHQ, Elecraft" <[EMAIL PROTECTED]>
Hi Simon,
You can center the passband on any 7-8 MHz region (or a little wider with
slightly lower gain.) So it should
-Original Message-
From: [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Mon, 17 Oct 2005 16:29:24 +
Subject: [Elecraft] Operating question - OT
where the station I am working is drifting (obviously he doesn't have Elecraft
rig!). If this happens, should I move my vfo frequenc
Hi
I am selling K1 Serial number 051. I've used this K1 mostly for the
occasional QSO from my workbench, and listening to the bands while I
build stuff. Its has also seen some use for playing ina few QRP
contests, usually with a portable antenna from a shady table in my back
yard. It works gr
Hi Simon,
You can center the passband on any 7-8 MHz region (or a little wider with
slightly lower gain.) So it should be just fine for Sat use :-)
I'll be posting info on it on the web in the next 3 weeks. At that time it will
be added to our order page. Deliveries are in 6-8 weeks from toda
Hi,
I was catching up on my reading and in going through the October issue of QST
I found interest in the article which gave a history of transmitters,
receivers, VFO's, transceivers, RIT, XIT, etc. It was pretty neat to see about
30 or 40 years of evolution on one page.
As I was reading,
Hans-Christoph Scheiblberger wrote:
My rig seems to have quite a few birdies
I have been struggling with them for some time, and have had the able
help of Geoff, GM4ESD, who has done various experiments and analyses.
The worst ones seem to be related to the bias oscillator in the KPA100
(n
Please note - the date was listed incorrectly for the Spookfest. The
correct dates are listed below. Sorry for the error, but we change from
EDT to EST during the contest.
Time: Saturday, Oct. 29th (1pm EDT) 1700 UTC to Sunday, Oct. 30th (11pm
EST) or 0400 UTC 10/31.
Hope to work you during the
Hello -
I am using my K2 with ATU, KIO2, and DSP with a Mac PowerBook G4 and
a Rigblaster plus.
For software I am using MultiMode OSX, v. 5.6.0.
I don't think that there are too many people using this configuration
and I find that trying to coordinate the instructions for the K2, the
Rig
Hello Chris!
I think that birdies are normal behavior of K2 (nonexisting shielding inside
K2 between different modules).
Some of them can be resolved , some of them will stay but You can live with
them and still have nice rig.
When You'll attach the antenna almost all birdies will be coverd by ant
Hi folks, first thanks to the guys who responded to my previous query on
the Z match. Well I built the thing and it works (the one shown on this
site http://www4.tpgi.com.au/users/ldbutler/SingleCoilZMatch.htm). But here
are some questions for you experts:
I am using a 130 feet end fed wire with
Hello group,
I´m the owner of a K2,which I bought last week from a fellow ham and at the
moment I´m testing and studying how to operate this rig.
The number of my K2 is 02447. Maybe my question has been asked a lot of
times, but I`d be glad to get an answer:
My rig seems to have quite a few birdi
I will be out of the office starting 10/16/2005 and will not return until
10/21/2005.
At College Station for SWEMA Meter School. Will be able to ck e-mail
during evenings.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subsc
20 matches
Mail list logo
