Bruce Bowman wrote:
Just curious... did you ever get this resolved?
I'm not certain yet. Since my original message, I have dropped my AGC voltage
to 3.98V, re-adjusted L34, and recalibrated the filters using the most recent
notes for using Spectograph, and recalibrated the S-meter.
When I c
Don Wilhelm wrote:
May I suggest that you build the test oscillator shown in the
Troubleshooting appendix of the K2 manual, and use that oscillator to
perform the Receiver Signal Tracing steps.
I would except I probably don't have the right resistor values. The Cheap 'N
Dirty signal tracing fr
Kevin,
Try this: http://hamcall.net/call?callsign=ja7axn
Regards,
kurtt
Kurt Pawlikowski, AKA WB9FMC
The Pinrod Corporation
[EMAIL PROTECTED]
(773) 284-9500
http://pinrod.com
Kevin Rock wrote:
Good Evening,
It worked! Moving the forty meter net forward in time all
Glenn,
Thank you for the information. That is very reassuring for me. I've ordered
the adapter from Elecraft and we'll see what happens when it arrives.
To All,
My thanks to all who replied including direct email to me. Your responses have
been excellent and appreciated. I might mention
I have configured my computer and paddle according to Figure 8-1 on page 92
of my K2 owner's manual. According to the N3FJP software I connected the
keyline to pin 7 of the d-sub and ground to pin 5. I selected INP PDLn and A
DET On in the K2 menu. When I turn on the K2 I hear a low frequency stead
Good Evening,
It worked! Moving the forty meter net forward in time allowed many more to
check in. Signals were great here but some of the reports for me were not as
good. Where I was giving a 579 I was getting a 559 with QSB. Oh well, it
worked as well as it could. From my afternoon's r
Hello,
Looking for James de KF6K.
James, please e-mail me direct.
72 and Thanks,
Ron Polityka
WB3AAL
www.wb3aal.com
www.n3epa.org/
K1 - SN 01011
K2 - SN 01392
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to po
Leigh
Thanks for the response.
you wrote:
I have found a number of confusing issues with the DATA A filters. I
report them to k3support, and eventually they will get fixed. (Some
have already.) If you have reproduceable cases, you can write down the
details and send them in.
I turned these in
Simon
Fair enough. I'm trying to use your program to ease some on the
kinderkrankheiten of the K3 software. I've been trying to find a way to
use the Dual PB filter for RTTY. I have tried three approaches:
1. Mode: Data, Data Mode: A
You can transmit anywhere in the waterfall. Invoking Dual
On Dec 16, 2007 8:38 AM, Geoffrey Mackenzie-Kennedy
<[EMAIL PROTECTED]> wrote:
> Probably a daft question but am I right to assume that the version of
> firmware supplied as part of a K3 kit purchased from Elecraft is the latest
> released version existing at the time of shipping the kit, or is the
Geoffrey Mackenzie-Kennedy wrote:
Probably a daft question but am I right to assume that the version of
firmware supplied as part of a K3 kit purchased from Elecraft is the
latest released version existing at the time of shipping the kit, or is
the kit supplied with some early version of firmwa
Luc,
You can change the display time on the KX-1 between 5 and 60 seconds
or always on. See page 65 of the owners manual under LED.
Regards,
kurtt
Kurt Pawlikowski, AKA WB9FMC
The Pinrod Corporation
[EMAIL PROTECTED]
(773) 284-9500
http://pinrod.com
luc Favre wrote:
When my KX1 switch from transmit to receive the display remains about 2
seconds blank before redisplaying the frequency. Is this behaviour correct ?
I'm afraid ist is. I'm right ?
Thanks for replies.
Luc/F6HJO/HB9ABB
___
Elecraft mailing list
Post to: E
Forget the cover ... I totally rebuilt the shack shelving to accommodate the K3
and a SPE linear. Don't know which equipment will take longer to arrive :-(
73
Stewart G3RXQ
Mustn't grumble - Life of Brian ?
On Sun, 16 Dec 2007 08:25:33 -0800 (PST), Larry K1UO wrote:
>
> Got the cover...now need
Hi Joe,
Receiving double sideband AM with offset tuning has some
unique audio equalization requirements since the low audio
frequencies are boosted by 6dB due to the partial remaining
sideband.
Agreed, but when, for example, trying to fish out weak signals from NA
(10kHz steps) between str
Got the cover...now need the radio!!
http://www.nabble.com/file/p14363190/Elecraft%2BK3%2BCover.jpeg
--
View this message in context:
http://www.nabble.com/K3-dust-cover-tp14363190p14363190.html
Sent from the Elecraft mailing list archive at Nabble.com.
> With the 6kHz filter it was not possible to set bandwidth
> greater than 2.8kHz and/or Hi/lo cut to 3000Hz and 200Hz
> using the knobs.
That's correct. AM is a double sideband mode and requires
equal bandwidth above and below the carrier. Thus with a
6 KHz filter, one would be limited t
Here in Detroit we are in the middle of a snow storm that could bring up to
12 inches by the end of today so I am enjoying a slow morning with my coffee
and some time to daydream. Here is a thought for the Elecraft design
engineers - a KX1 with a redesigned case that includes a hard cover to
p
Geoff
The firmware on mine was right up to date to the version released that
week. I would recommend you test and align your K3 with the version that
it comes with, then once it is fully working you can update it to the
latest version from the web.
73 Dave, G4AON
K3/100 #80
=
Pro
Probably a daft question but am I right to assume that the version of
firmware supplied as part of a K3 kit purchased from Elecraft is the latest
released version existing at the time of shipping the kit, or is the kit
supplied with some early version of firmware which has to be updated as part
Wonder that the K3 looks like in person? Sounds like? Works like?
Folks who are willing to show their K3 and those that want a little
"Kick the Tires" session can make
that known on the K3 fourm at
< http://www.zerobeat.net/smf/index.php/topic,119.0.html >
73 - K3HRN
___
Hi Bob,
There would be some disadvantages to sending the RTTY / PSK via the KY
command, I honestly think that an external program such as DigiPan,
WinWarbler etc. would be a better option. Displaying the text decoded by K3
is another matter.
FWIW I don't really have time to add this now, I a
22 matches
Mail list logo