Thanks for the report Ken, I am afraid I don't see a need for one of Rose's
covers for it. I am waiting for an uncommitted sensor so I can measure high
power at VHF and above.
Regarding powering:
My K3 12V output powers an automotive relay (+diode) which connects the 12V
PSU to an 8 way
Is there a way to reduce the how long the K3 seems to take to start/stop
sending RTTY after it keys up.
The software running on your computer should control this.
If you are using a paddle to send RTTY using the K3 internal FSK
encoder, then send the prosign IM (di-di-dah-dah) to immediately
I'd like to recommend to others my solution.
An Alpha Delta Model TT3G50
While it may not be as inexpensive as winding your own chokes etc, it
is a whole lot easier. I have a double male connector on the back of
the K2/100/AT100 and it feeds the amplifier or antenna. I never move
it. BTW I
Is there anywhere to purchase RCA cables with 100% shield?
Phil
Philip LaMarche
LaMarche Enterprises, Inc.
http://www.instantgourmetspices.com/ www.instantgourmetspices.com
www.w9dvm.com http://www.w9dvm.com/
800-395-7795 pin 02
727-944-3226
FAX 727-937-8834
NASFT 30210
K3 #1605
Folks,
What driver should I download for my KUSB on my new W7 machine?
Many thanks,
Greg K2UM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hi all,
Just a reminder that the net will be run as usual on 3658 +/- QRM at 09:00
tomorrow. I hope to see you there. We had a good discussion on several
topics last week and it would be good to get your input.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC HB9DRV-9 DX Clusters
Member RSGB, GQRP
On Sat, 14 Nov 2009 12:59:17 -0500, Phil LaMarche wrote:
Is there anywhere to purchase RCA cables with 100% shield?
First, 100% shield is meaningless. What matters is shield
RESISTANCE. Second, RG58 that has copper braid shield works quite
well. You buy some RG58, you buy some Switchcraft or
Thanks, to Cookie (Willis) for the email. I went to the Prolific site and
checked for drivers.
Unwittingly I had hooked up my KUSB USB connector into the HP computer with
Win 7 and
the operating system looked for and got the correct driver. I connected it
to my K3 all seems good.
I also used it
Phil:
I've bought cables with Amphenol connectors from www.cablesondemand.com
and have been very happy with them. Besides high quality RCA cables,
they sell 6 pin mini-din cables (all 6 pins connected) and 50 ohm BNC or
SMA or N-terminated coax. I can't say the RCA audio cables are 100%
Thank you. Just ordered 10.
Phil
Philip LaMarche
LaMarche Enterprises, Inc.
www.instantgourmetspices.com
www.w9dvm.com
800-395-7795 pin 02
727-944-3226
FAX 727-937-8834
NASFT 30210
K3 #1605
CCA 98 00827
CRA 1701
W9DVM
-Original Message-
From:
My problem with the HRD program operating over my network is that the WinKey
keyer won't connect
from HRD. It works fine with the WinKey Remote program.
This is a copy of the LogFile from HRD's attempt to connect to the WinKey.
| Time | Text
How is the display on the computer? The LED display is fine but I really
bought the W2 (mine is on the way) to be able to use the higher resolution
display on my computer.
AD6XY wrote:
Thanks for the report Ken, I am afraid I don't see a need for one of
Rose's covers for it. I am waiting
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 11/15/09 at 1800Z on 14.314
MHz. Hopefully, propagation will be good. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home:
Also, if you are using a KAT3 without separate receive antenna try
bypassing the ATU on receive. That can give you again as much
improvement in the MDS (minimum discernible signal) as switching the
preamp on.
Don't forget to switch in the ATU again when you go to transmit!
73,
Drew
AF2Z
On
Good Evening,
The snow has stopped falling now with only an inch remaining from the
previous three storms. I thought I saw snow in the rain a few days ago but
once it started to cover the ground I was sure. Snow level dropped a thousand
feet below me, however, the accumulation was so
Gang: Just curious !
How high have did you set your current limit ???
My K2 has every option available ( 10 watts ) and I'm running my Graph set
to BAR with back lighting on.
Just got a new power meter and noted my actual output is about half what I'm
setting it with power control.
16 matches
Mail list logo