Don wrote:
>
>Well the suspect coax has been replaced and the problem lives on.
>
>Now I have no idea on what to do to get rid of the problem.
>
>I think its common mode on the coax but now I am not sure. I have to
>walk away for awhile and think about what to do next.
>
Clamp-on RF Current Mete
Jim,
Be more specific on your question. My experiences are:
I HAD a Rig Expert Standard running on the K3 but I dismantled it and is
using a Signalink USB. The Rig Expert is great since it does CAT radio
control using Ham Radio Deluxe however, the RS232 Serial Port was the issue
that made me s
Don,
If the problem does not exist when transmitting into a dummy load, then
it is related to common mode RF on the coax. OTOH, if it persists with
a dummy load, then it is a K2 problem.
73,
Don W3FPR
On 10/24/2011 9:08 PM, gold...@charter.net wrote:
> Hi All
>
> Well the suspect coax has bee
Anyone have a K3 running with a Rig Expert Tiny?
Tnx
JIm
K5AUP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Folks - We ended this topic last week due to the high number of postings
on the topic.
73, Eric
List moderator
---
www.elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.q
Hi All
Well the suspect coax has been replaced and the problem lives on.
Now I have no idea on what to do to get rid of the problem.
I think its common mode on the coax but now I am not sure. I have to
walk away for awhile and think about what to do next.
At least its only a hobby not somethi
Hi Lu,
Why not just tune the K3 to the RF output frequency of the Orion? The
K3's IF output signal is picked off before the crystal filters, so the
P3 shows the actual unfiltered signal received at the K3 antenna
connector.
Alan N1AL
On Mon, 2011-10-24 at 16:39 -0400, Lu Romero wrote:
> Hi Don
Maybe you purchased one of these items and decided not to use. I'm
looking for the following to add to my K3.
K144XV-k 2m module
KUSB USB Adapter
KFL3-400 or KFL3-200
KFL3A-2.1k
Please send your price shipped to 23901.
Thanks!!
Kyle
__
There is a dedicated fldigi reflector on Yahoo (linux...@yahoogroups.com) which
is a good place to ask questions regarding this software (Linux, OS X and
Windows are supported).
Bob, N7XY
On Oct 24, 2011, at 3:19 PM, David Herring wrote:
> Giorgio,
>
> Like you, I am a Mac user and a window
Giorgio,
Like you, I am a Mac user and a windows XP under VMware user. I prefer the Mac
apps to the Windows apps and have gone strictly Mac.
The signalink USB is redundant, but I have one and use it anyway and I find it
to be a flawless performer.
Fldigi is absolutely wonderful on MacOS. Coc
Many voice codecs (for cell phones and such) use an algorithm called
Voice Activity Detection (VAD) that seems to be the current take on
syllabic squelch.
Here is some info:
http://en.wikipedia.org/wiki/Voice_activity_detection
I'd like to see it in the K3 too.
73,
Bob Wright, N7ZO
-Origi
If you protect the P3 input with some back to back diodes, put a piece of
wire on the IF input, dial up the P3 IF to the the freq you wish to
listen to, and the P3
will show you the received signal.
I think the caveat is to protect the input to the P3 or you will burn it
up..
Merv K9FD/KH6
Reducing the agressiveness of the auto-notch is on th elist for
investigation.
73,
Lyle KK7P
> 1) Auto-notch create artifacts very uncomfortable, small signals are
> hard to get...
__
Elecraft mailing list
Home: http://mailman.qth.ne
Hi guys.
Even if I like very much HRD I decided to stop with it due to stressing
faults (I really hate) in serial communication that suddenly and frequently
cause AGC going off.
I'm a Mac user and right now I virtualized at it an XP Pro just and only to
run HRD.
I'm planning to move to a 100% OS
I'm really surprised for performance of K3. I have tested majority of
options/accessories and all are super, but nothing is perfect!
I have found two issue, i need know if is there a workaround.
1) Auto-notch create artifacts very uncomfortable, small signals are
hard to get. I have searched on ma
I also run both Windows 7 64 bit and XP. I agree that XP is still a very
good operating system. About the only difference I have noticed is that
Windows 7 boots up much faster. However, it is installed on a new computer
which is much more powerful and so it is hard to tell whether the improved
b
thanks Don and Fred!
73,
Jorge
CX6VM/CW5W
-Mensaje original-
De: Cady, Fred [mailto:fc...@ece.montana.edu]
Enviado el: Lunes, 24 de Octubre de 2011 06:05 p.m.
Para: Jorge Diez - CX6VM; Elecraft Reflector
Asunto: RE: [Elecraft] SUB in a different band
Hi Jorge,
In the Config menu, you c
Hi Don:
Thanks for the response.
Maybe Im not clear regarding what Im trying to do.
I have a dozen TenTec Orion 1's at a multi multi operation I
play at. Im tasked with "standardizing" the audio
parameters for this operation in regards to compression and
frequency response before CQ WW SSB.
That works very well. I go from the Spkr jack to a Radio Shack amplifier
that goes to two stereo speakers mounted on the wall and pointed at me.
Wonderful audio. I've done this with all my radios for over 10 years.
Phil
Philip LaMarche
LaMarche Enterprises, Inc
p...@lamarcheenterprises.com
w
Hi Jorge,
In the Config menu, you can set VFO IND to yes to allow VFO A and VFO B to be
set on two different bands.
Cheers and 73,
Fred KE7X
Fred Cady
"The Elecraft K3: Design, Configuration and Operation"
www.ke7x.org
> -Original Message-
> From: elecraft-boun...@mailman.qth.net [mail
Jorge,
No risk at all, just set CONFIG: VFO IND to "YES" and VFO A can be on a
different band than VFO A.
That is true whether the SubRX is installed (and ON) or not.
73,
Don W3FPR
On 10/24/2011 3:52 PM, Jorge Diez - CX6VM wrote:
> Hello,
>
>
> when I bought my K3 was no possible to have the SU
Jeff,
If you must use Line Out ...
Rather than a mod to the K3, May I suggest you build a special cable.
At the K3 end connect a stereo plug, but with both conductors connected
to the tip - the shield still goes to the shell.
Alternately, connect to the Speaker Output jack instead of Line Out
Hello,
when I bought my K3 was no possible to have the SUB in a different band. I
don´t know if this is available now? I couldn´t put the SUB in a different
band.
Just in case I couldn´t setup my SO2R for next weekend, I am thinking to do
SO2V but want the second VFO in a different band.
Hello,
I was among the lucky ones who got to discuss all things Elecraft with Eric
at the Elecraft round table in Roswell, GA on Saturday.
One of the things I brought up was how nice the "voice squelch" on my Icom
rig worked, particularly when listening to 50.125 for band openings. This
feature
Hi,
I do not have a sub-receiver in my K3.
Is there any way to send the main receiver audio to the left and right
outputs on the line out jack?
Some times I "patch" my computer soundcards together to send the K3 audio
into an amplifier and stereo speakers, but I only get one channel, the left
(I
I have a question about connecting the KAT500 (outside version) to an 80
thru 10 meters wire antenna.
As an example, I have a "Mystery" antenna which, like the G5RV uses a tuned
length of twin-lead as part of the antenna design. Therefore I will have two
possible places to couple the KAT500 to the
I like that Rob has included the specs of vintage receivers. Among
other things,
I was pleased to see how well my Drake R-4C with Sherwood mods stacks up
against the best receivers of today.
The fact that I no longer have access to the bench of test equipment
that I did
years ago, other than a
Over 5 amps of current into the base K2 will cause the resettable fuse
to trip.
Did you see a HiCur message?
Check the current draw of the base K2 (tap DISPLAY) during transmit - it
should not exceed 3.50 amps.
73,
Don W3FPR
On 10/24/2011 10:57 AM, ny4g wrote:
> This is the first time this has
This is the first time this has happened on my K2. It dropped out on key
down at about 70 watts. I am powered with a 33a-h SLA battery. What can
possibly cause the cutout on power?
NY4G
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-Dropping-Out-at-Load-tp6925301p6925
Dear friends,
I would like to sell or change the Icom Ic-756pro-3 with PS-125 power supply
for the price of the Kit KPA-500 if anyone has interest in PRO-3 can contact
me directly via email. The buyer gets a gift W2IHY 8band + EQ Plus and Heil
Gold line microphon with SB-2 Boom . Otherwise PRO3 i
Gordan:
I sold the K3. Please reply to the group only, thanks.
73
Dave, N3HE
- Original Message -
From: E72X [via Elecraft]
To: David Windisch
Sent: Monday, October 24, 2011 3:40 AM
Subject: Sell or trade new offerings!
Dear friends,
I would like to sell or change the
Dear friends,
I would like to sell or change the Icom Ic-756pro-3 with PS-125 power supply
for the price of the Kit KPA-500 if anyone has interest in PRO-3 can contact me
directly via email. The buyer gets a gift W2IHY 8band + EQ Plus and Heil Gold
line microphon with SB-2 Boom . Otherwise PRO
32 matches
Mail list logo
