FAO: Elecraft...
I don't supose for one moment, that there could be a version of that
"Other Sideband Nulling" software, that could be persuaded to work with
more "normal" signal generators, from the likes of HP/Agilent, R&S,
Marconi etc, via GPIB or Serial (using VISA call's for example?)
Els
I being one of them to be able to use my XG3 better in the shack.
73,
Fred/N0AZZ
K3 Ser # 6730--KX3 # 2573--K2/100 # 6470-KAT100
P3/SVGA--KPA500--KAT500--W2
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave B
Sent: Thu
I have a fully assembled and functioning perfect XG-2 it's a 3 band 1-uV/50-uV
receiver test oscillator.
Price is 50.00 including shipping.
Mike
VE3WDM
__
Elecraft mailing list
Home: http://m
This thread seems to have gone off-track. I read the posting on Nabble. I
don't receive individual (or digest) emails. Simply browsing through the
recent postings on Nabble is a real PITA due to all the recent spam
postings. These posts have NOT been forwarded to those reading via email.
My or
In trying to set up my K2 using N1MM I keep getting "port config" errors
and nothing seems to help. Any suggestions?
--
On the 8th day. God created Amateur Radio and Baseball.
NAQCC #0420
SKCC #089
FP #567
4SQRP #169
Wiol ono
__
Elecraf
Robert,
What port do you have N1MM and your radio talking to? Is any other
software (rig control, logging, etc.) using that same port when you try to
configure N1MM?
Thank you and 73.
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
K3 #281, P3 #688, KPA500 #1468
HRD v5.x/6.0 Test
K3/100 serial #03532 in excellent condition
Purchased as Factory assembled direct from the US in June 2009.
Fitted with the following from the start
ATU
KBPF3 General Coverage Module
13kHz FM roofing filter
6kHz 8 pole AM r
Before putting this transceiver on ebay, I will try direct!
I want to sell my K2/100 to make money for a K3!
It is composed of the following add-on :
K2, by itself
KSB2
KAT2
KIO2
K160
KAF2
KPA100
KAT100
The KAT100 is in the large box (identical to the K2)
I include Power cable with Anderson conn
Although this thread is way OT, I'll chime in with my $.02.
I use an email application called Agent it costs $20.00. You can
find out about it here: http://www.forteinc.com/agent/index.php
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
On Wed,
Has anyone tried putting a wifi/rs232 dongle on the K3 so an IPad or Android or
a Laptop could talk to it?
Lee Buller
K0WA
In our day and age it seems that Common Sense is in short supply. If you don't
have any Common Sense - get some Common Sense and use it. If you can't find
any Common
Like these? http://pignology.net/
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lee Buller
Sent: Thursday, July 11, 2013 7:34 AM
To: Elecraft Reflector
Subject: [Elecraft] K3 and WIFI
Has anyone tried
Yes, the Piglet is designed specifically for rig control over wi-fi. This is
the second generation of the idea, replacing the Pigtail.
http://pignology.net/piglet/
wunder
K6WRU
On Jul 11, 2013, at 7:33 AM, Lee Buller wrote:
>
>
> Has anyone tried putting a wifi/rs232 dongle on the K3 so an I
Hi Lee,
That's what I'm doing with HamLog (iOS and Android) and Piglet.
I have the full face of the K3 in HamLog on iOS:
http://blog.pignology.net/2013/06/hamlog-version-462-for-ios-released.html
Piglet: http://pignology.net/piglet/
HamLog iOS: https://itunes.apple.com/us/app/hamlog/id308437400?m
Dave
The automated routine is embedded in the KX3. No additional software is
needed. I used an HP8640B sig gen as I don't own an XG3.
Download the appropriate App Note from the URL below. All will become clear.
http://www.elecraft.com/KX3/kx3_app_notes.htm
I found use of the routine followed
I have a LP Pan set up for the K3 and a Creative Labs EMU 0204 outboard sound
card for sale. The LP Pan has the preamp mod installed. Audio cables from the
Pan to the EMU only.
$225 for both plus shipping. Contact me at k...@bellsouth.net
_
Dave,
The XG3 control command set is fully documented, so feel free to write whatever
remote-control applications you'd like. This is why we provided the commands.
The XG3 utility program uses many of them to create a general-purpose RF
generator, with memories, scanning, etc.
73,
Wayne
N6KR
G0WBX asked:
> Are all the commands that the software uses with the XG3 documented?
The XG3 commands are in the owners manual available at
http://www.elecraft.com/manual/XG3%20Owner's%20Manual%20Rev%20D.pdf
73, Elwood, WB0OEW
__
Elecr
I'm lusting after a KX3 and the 100W amp, so I'm trying to turn some
unused rigs into cash. There's an IC746 (160M-2M) and a TS790A
(2M/432/440 All Mode). They're listed on eham. I like both radios, but
I'm on the wrong side of the mountain to work anything above 6M, and the
K3/KPA500 does th
I was just contemplating ordering the components to do this project
and tried to find the referenced KK7P site
(http://www.kk7p.com/k2kpa100.html) but it seems to have "gone away".
Did anyone save the instructions?
-Scott N3SW-
__
Elecraft
Don, W3FPR posted the information after my sig a couple weeks ago. I
used it myself to remote a KPA/KAT100 into an EC2. I didn't save all the
header info for the post, but it shouldn't be too hard to find it in the
archives.
You didn't say whether you are including the KAT100 in the enclosure.
"I got a copy of the software for running the OSB nulling from elecraft
the other day..."
I've been looking on the website and FTP and haven't found any utility for
doing "automatic" opposite Sideband Suppression with a XG3. I read the
app note on OSB but there really isn't any mention of the X
Scott,
You will find this in the archives from 5/5/13, but ! am copying it below.
I do not have the website information, but I think I can describe it on
words - it is not that difficult.
If you are adding the KAT100 as well as the KPA100, order the KAT100-2
as well as the KPA100. (If you alre
I just finished building the K3 with the sub receiver. All went well until I
fired up the rig and found that I was not getting a signal in the sub
receiver.. I had white noise but no signal. I checked all the wiring that
went from the main board to the sub receiver and all was in place and tight.
New K3 user -- it boots up in transmit if the RS232 attached laptop has not
been booted up first . And no amount of button pushing that I have found
will take it out of transmit. (other than power off - but back on and still
in transmit)
What do I have set wrong ??? This is a real RS232 not a
Hi Hank,
That is a standard problem with RS232 ports when they have not been powered up
before the K3. One solution is to go into your CW WGHT menu and tap the 4 key
to select VOX AUTOOFF. This takes the K3 out of VOX mode when you turn the K3
off so when you turn it on again it can't be keyed,
On 7/11/2013 2:07 PM, Pfizenmayer wrote:
New K3 user -- it boots up in transmit if the RS232 attached laptop has
not been booted up first . And no amount of button pushing that I have
found will take it out of transmit. (other than power off - but back on
and still in transmit)
What do I have se
On Thu, Jul 11, 2013 at 2:29 PM, Fred Jensen wrote:
> On 7/11/2013 2:07 PM, Pfizenmayer wrote:
>>
>> New K3 user -- it boots up in transmit if the RS232 attached laptop has
>> not been booted up first . And no amount of button pushing that I have
>> found will take it out of transmit. (other than
Hi Joe,
I didn't see a response to your good question, so here goes one:
Yes you can use a standard 15-pin Y-cable splitter to split out signals you
need, for example the DIGOUT1 for switching on the PR6 or to input FSK keying
signals to the K3. The key thing is to make sure the cable between one
One more thing, make sure you get the DB15HD (should be DE15HD, but that is a
losing battle) cable that has three rows of pins.
Cheers,
Fred
Fred Cady
fcady at ieee dot org
> -Original Message-
> From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
> boun...@mailman.qth.net] On Behal
Thank you, Fred. And as you well know, there is no such thing as a
"DB9" connector, it is a DE9. But, as you say, that looks like a fight
against a rising tide.
I have to fight this battle again and again when preparing questions for
license exams, and we constantly get complaints from the f
The proper splitter is available from:
www.cablewholesale.com p/n 10H1-27708
www.altex.com Philmore 70-568
Splitters from both sources are "all 15" and the same as the splitter
included with the KPA3AUX cable kit or the E980190 "Extra DB15 Y-cable"
listed with the KPA500 and K3.
73,
Joe,
Thanks and a good question so I made a quick test at 50.125-MHz:
KX3+ATU -> 6m amp* -> yagi (*amp off)
SWR = 1.2
KX3+ATU(bypass) -> 6m amp* -> yagi
SWR = 2.5
Looks to me that the ATU in the KX3 is switched out in bypass else
the SWR would have not changed.
Why no change in MDS whether
Followup on my post about a week ago. After a nut fell off inside the K1,
I lost the sidetone and the selectivity seemed to be on #3 (most
selective). I'm receiving signals on the air just fine, so it's clearly a
sidetone/audio problem, and not an RF problem. I can set the power level
just fine,
I just recently noticed I can barely hear S9 signal on my K2.
I checked with my XG3 and on all the other bands I get an S9 signal with the
-73 dBm
level but on 40 it gives an S1 reading.
This is a K2 I bought 2nd hand while I'm building my own.
It has a DSP in it and as far as I can tell it has th
Hi Stan,
You didn't indicate other options besides the DSP module that are installed
in your K2,
but here are some possible gremlins in order of decreasing likelihood of
being the culprit:
1) Check the ATT/PRE switch when on 40 meters to be sure the ATT is not
switched on.
2a) If you have the KA
David,
Those AF1 and AF2 signals are indeed connected - but not directly. They
go to the AF Gain control on the Front Panel.
Sorry that the MAX518 replacement did not bring the sidetone back. The
signal from FP U2 pin 1 should be a square wave at your sidetone pitch.
You might want to check
Stan,
Check the RX ANT setting in the menu. That is a per-band setting. If
the RX ANT is set to ON for 40 meters, you will not hear much through
the normal antenna connection, but will hear a good signal through the
RX Ant jack.
If that is not the problem, ask again and tell us whether your
Sometimes popular usage trumps correctness. ;>)
For those who care to understand this point, see
http://en.wikipedia.org/wiki/D-subminiature.
Ed W0YK
Jim KL7CC wrote
> Thank you, Fred. And as you well know, there is no such
> thing as a "DB9" connector, it is a DE9. But, as you say,
> th
Well you both had it spot on.
"Someone" came in my shack and turned the receive antenna on!
It's now working FB.
I sure learned a bunch about the DSP last night. I stayed up until 3:00 AM
trying to figure out what in the world was wrong. I changed every parameter
I could think of and just could
39 matches
Mail list logo