Yes, I went back and looked and I had it turned up too high
Thank you
From: Alan n...@sonic.net
To: elecraft@mailman.qth.net
Sent: Thursday, January 8, 2015 8:36 PM
Subject: Re: [Elecraft] P3 and the Nose Blanker an observation
Also it is important to set the noise blanker level to
I noticed something on the P3 and maybe it's a known thing.
I turned on my Flex-1500 that had been sitting idle for nearly a year and
noticedthat the display looked far sharper than the P3's display (Signals more
distinct).
Then I discovered what I was seeing... I had the noise blanker on the P3
Also it is important to set the noise blanker level to the minimum that
eliminates the noise.
Alan N1AL
On 01/08/2015 04:00 PM, Harry Yingst via Elecraft wrote:
I noticed something on the P3 and maybe it's a known thing.
I turned on my Flex-1500 that had been sitting idle for nearly a year
I have tried the last two versions of WSJT-X and there seems to be some
problem with the rig control for the K3. I get error messages, something
about the program not being able to read the mode of the radio's second
VFO.
As is often the case, a pretty cryptic error message is what's offered,
Hello;Looking for built or unbuilt SSB board for my K2.
Please let me know if you have one.
Thanks;Jacob K4JQV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Hmmm ... don't know, but generally speaking anything monochrome works
for me. Ansel Adams photos look great to me, monochrome TV is fine too.
My wife tells me the P3 spectrum display background is deep blue,
which is just barely distinguishable for me from the black WF background
in
I just finished building my KAT500 and KPA500. I am trying to integrate them
into my existing setup consisting of a K3, P3, and Microham Microkeyer II.
This setup was working fine before I cabled up the new equipment, and now I am
having some issues.
All hardware has been updated to the
Folks, HNY to all
I believe that there is a potential firmware upgrade that is imminent that
will enable the K3 to be able to generate and receive PSK63 (as well as
PSK31). If I have understood correctly, I would be grateful for an idea of
likely timescales ?
Many thanks
73 Graham G4FNL
Hi Graham,
This was added last October. Here are the relevant release notes:
MCU 4.93 / DSP 2.83, 10-16-2014
* PSK63 MODE ADDED: To select PSK31 or PSK63, first tap either end of the MODE
switch to select DATA, then hold the DATA MD switch and use VFO A to select the
PSK data rate.
73,
Wayne
Thank you - wow - what a fantastically fast response! I will check it out.
Many thanks
73 Graham G4FNL
-Original Message-
From: Wayne Burdick [mailto:n...@elecraft.com]
Sent: 08 January 2015 22:33
To: gra...@g4fnl.co.uk
Cc: Elecraft Reflector
Subject: Re: [Elecraft] beta
I thought that a firmware update that allows PSK63 had already been
released but I do not recall what the revision number is.
Mike
KI0HA
On 1/8/2015 4:29 PM, G4FNL wrote:
Folks, HNY to all
I believe that there is a potential firmware upgrade that is imminent that
will enable the K3 to be
Yes, it was done before you asked about it,
Graham: That *is* fast :-)
Phil W7OX
On 1/8/15 2:36 PM, G4FNL wrote:
Wayne
Thank you - wow - what a fantastically fast response! I will check it out.
Many thanks
73 Graham G4FNL
-Original Message-
From: Wayne Burdick
Use a 4 pole jack plug too helps.
Tip, Ring, Ring, Sleve.
They are relatively easy to obtain.
You may also (probably will) need a resistive atenuator, and maybe a DC
blocking cap between the iMic's line out, and the KX3's Mic input. Or setting
levels gets tricky!
For receive, there are
Fred,
Thanks for the fascinating description of your monochromacy.
I have never come across anyone with this, though did know the condition
existed.
As a photographer I am conscious of colours and had an amusing incident when I
had a faulty iPad display where the colours were posterised in
Mine goes down to 1W which is the level I use now on my db6nt transverters.
I initially used 3W (to simulate my IC202 power) but the db6nt IF pin diodes
kept breaking
Dave
G4FRE
--
Hello K3 owners !
Want to know the lowest power setting Elecraft internal 2 meter
Lew,
Excellent observation (and troubleshooting).
Too often a problem can be due to something very simple but
unnoticed. If you build kits (the kind you solder components to a pc
board) you may have noticed many holes place in strategic areas of
the board that have no components installed
On 1/8/2015 7:32 AM, Larry Boekeloo wrote:
I have
a small cable I plug into my external speaker and then into my blue
tooth box around my neck. The audio from the K3 is pumped into both
hearing aids.
I have the same type of device (Phonak ComPilot). The only downside
is that it runs the
My observations on most RF power amplifiers is that gain is higher at
lower drive levels so proportionally there is more output. e.g. full
drive =10w, half drive = 7w, quarter drive = 5w.
You are describing classic compression in the amplifier [chain]. Where
you have cascaded amplifiers,
Just finished a nice QSO on 40 meters and the right channel click using
NEW QSK seems to be completely gone (or so low my old ears can't detect
it). I set the 60 meter channels up in memories using the K3/KX3 memory
editor and tried running through the modes and used TUNE and ATU-TUNE
into a
I've struggled with 35% hearing loss over the past 9 years. I finally spent
the money and bought hearing aids 3 years ago - what a difference for normal
every day life. However, they didn't help me much with ham radio but I
suffered through by putting the small Heil headset ear piece on top
A side note to this topic for RF amplifiers, in general:
I have not heard of this paper crunch noise description, before
this, but it's well known with VHF and up operation that one does
want to remove bias during receive on many amplifiers due to white
noise being generated. Perhaps this is
I'll add to this in that I just tested my KPA500 to see what the noise
floor did with it on or off. On an antenna, I noticed absolutely no
change in noise floor on any band 160-6, but just to kill the
atmospheric noise, I connected a dummy load to the output of the KPA500.
Again, absolutely
David and Lexa,
My observations on most RF power amplifiers is that gain is higher at
lower drive levels so proportionally there is more output. e.g. full
drive =10w, half drive = 7w, quarter drive = 5w. So one finds that
an amplifier hits a minimum output with lowered drive that is not
K2-100 SN 03429 for sale. Contact Jeff, K6JW at k...@arrl.net for full
information and photo.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
24 matches
Mail list logo