I’m looking for a FCC2 kit built or not. I also have a FCC1 Kit unbuilt that
is surplus to my needs.
I you have a FCC2 or are interested in the FCC1 let me know.
Thanks,
Pete WK8S
__
Elecraft mailing list
Home:
On 2015-04-05 21:56, Pete Meier wrote:
Any one heard of a Kanga DDSV3 and have info on it?
Could this be the unit in question?
http://m0xpd.blogspot.ca/2013/08/kanga-m0xpd-dds-shield.html
--
Cheers!
Kevin.
http://www.ve3syb.ca/ |Nerds make the shiny things that
distract
Owner of
A follow up to my write up... I should have included more details from
personal emails I received from Dave, G3TJP. Bob W7AVK also mentioned the
BG7TBL GPS Disciplined Clock and I totally got my wires crossed and didn't
mention G3TJP in my write-up. Sigh Apologies to Mr. Lankshear... Dave
Any one heard of a Kanga DDSV3 and have info on it?
Pete WK8S
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Dick,
Thank You for Your suggestion.
It looks like I solve my issue!
I decided to reset my K3 trough the holding SHIFT during the POWER ON. After
that problem was solved..
Thakns for Your time!
Best regards,
Karol SQ5LNU
Wiadomość napisana przez Dick Dievendorff w dniu 5 kwi 2015, o godz.
I purchased a KX3 when they were first introduced. Then life got in the way
and all non-essentials were put on hold. Now things have improved and I've
been thinking about breaking out my brand new KX3. What have I missed in
my absence, and whats the best way to bring this beauty up to speed?
Has anyone installed the K3 TCXO sold by RadioShackUSA?
Despite the name the company appears to be in China.
I don't really need a TCXO but for $32 it is tempting.
Paul, K1XM
__
Elecraft mailing list
Home:
I was able to narrow down the problem. It is related to SYNC DATA
(CONFIG:SYNC DT) which forces the same crystal filter to be used for both RX
and TX. As long as SYNC DATA is OFF everything works as expected.
If SYNC DATA is ON:
(1) Toggling between SHIFT/WIDTH and LO/HI CUT is inhibited
(2)
SYNC DATA provides a very short turnaround time by disabling operations that
would require switching the synthesizer frequency between receive and transmit.
(This is analogous to CW QRQ mode.) If you have the new synth installed
(KSYN3A), the delays will be much shorter even with SYNC DATA
Good Morning,
Spring is slowly arriving in Oregon. Highs in the mid 40s and lows
in the mid 30s. Mostly it is wet and chilly. The daffodils enjoy it
though and have been looking good for three weeks. I expect they'll
last for another two at least.
Propagation has been OK but not
Hello,
My Dear friends. I have a strange problem with my K3.
I noticed today some electrostatics from my antenna (high voltage from
antenna cable).
(My K3 was not grounded properly - my fault).
After that my K3 started transmitting all the time. There is no key paddle
connected…
The only way to
Since the radio isn't brain dead, it might be worth a try to reflash the latest
firmware and power cycle the rig. Then scroll through all the config settings
and look for anything out of place. Unplug anything on the AUX and serial
ports to eliminate external issues.
Warren KD4Z
K3 #8902
On
I've sometimes seen this when I have the K3 menu entry PTT-KEY to something
that allows the DTR/RTS RS-232 signals to assert PTT or key the radio, and
RS-232 line is asserted.
Dick, K6KR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of sq5lnu .
13 matches
Mail list logo