I'll wait for the official release.
Thanks for that added feature.
73, Charlie k3ICH
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe Lynch
Sent: Wednesday, August 31, 2016 9:05 PM
To: Wayne Burdick
Cc: Elecraft Reflector
Subject: Re: [Elecra
You are NOT grasping the problem or the suggested solution.
Please do yourself a favor and go read K9YC's white papers on
bonding/grounding, noise reduction, EMI/RFI reduction, etc
Just do it...
__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389
On 8/31/2016 2:23 PM,
Thank you, Wayne, for adding a cool feature to an already great radio.
73,
Joe Lynch, N6CL
On Wednesday, August 31, 2016 5:31 PM, Wayne Burdick
wrote:
Hi all,
KX2 beta firmware rev. 2.68 is now available. This revision adds AM mode
transmit and receive. Please see our KX2 software pag
Just as reminder that Skeeter Hunt log summaries (and soapbox comments) are due
no later than 11:59:59 PM this coming Sunday evening.
So far we have received 67 log summaries. The roster is marked to show whose
logs have been received:
https://docs.google.com/spreadsheets/d/1KJWpvDDBZibCMqna_qG
You are concentrating on the "green-wire ground".
Instead concentrate on running a heavy wire or braid in parallel with
your audio cables - it works. It may be difficult to get a chassis
ground on the laptop but look for a jackscrew on one of the D-shell
connectors. Worst case, run a wire aro
Hi all,
KX2 beta firmware rev. 2.68 is now available. This revision adds AM mode
transmit and receive. Please see our KX2 software page:
http://www.elecraft.com/KX2/kx2_software.htm
73,
Wayne
N6KR
__
Elecraft mailing list
Home: ht
It might be in its aftermarket phase now.
Try:
https://www.summitracing.com/parts/rmi-2573?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-ram-mounts&gclid=Cj0KEQjwgJq-BRCFqcLW8_DU9agBEiQAz8Koh74TNypJwTh1hQlMVRIW0cR1DLZ3haDLuNgqYHO7jV0aAlIr8P8HAQ
It's the same mount featured in the KX3 Mob
This would be hard but I can see how that could happen.
The KX3 and the laptop use 2 prong connectors and this still happens, the
macbook pro has a grounded power plug
but this still happens.
The stupid thing is they all share the same power board, so in theory they
should all be sharing the same
Thanks to John and also Jim Rhodes, George-AI4VZ,
Jeff-K2SDR who all sent the same model number.
I called RAM this morning to check on dimensions
that the mount accepted; max is 3.5 inches by 1.6
inch depth which will accommodate the KX3 if you
do not have an add-on heat sink like I have (add
Loop is absolutely the wrong way to view this problem, and transformers
are NOT the easiest or cheapest solution.
The solution is 1) proper chassis-to-chassis BONDING between all of the
equipment being interconnected and 2) get power for all of the
interconnected equipment from the same mains
Agree. I have done the same for some five years.
And even if you have the Acom antenna switch and selector you just send one
or two dits and you are on the air at the right antenna.
Vy 73 de OZ1CCM, Kjeld
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Beha
Hi,
This sounds like a 'hum loop' problem, the scourge of audio enthusiasts.
In effect there are two earth connections between the KX3 and PC and it
forms a small loop aerial where by it picks up mains interference. You could
try running the cables from the KX3 to the PC very close together.
It do
HI all
Me again, I have a problem with my setup and trying to work out what is
wrong. I have a handy video, which shows my problem:
https://www.youtube.com/watch?v=hZPYUVpqefI
I hope somebody knows how to fix this, I've tried different USB hubs,
different laptops even.
I havent tried a different
13 matches
Mail list logo