Is there any problem "jumping " from my current level to the newest?
Thanks Guys, I should have known but somehow I thought I had to upgrade to
load new levels because of the synthesizers. So glad to hear that and this
one will be quite an upgrade from maybe a couple of years ago.
I just made
Hello Guy, Ian, Don, Eric, Ed…...
Very enlightening posts, thank you!
As a ham who has only, in the last 12 months, returned on air after 30 years,
this information is very relevant.
So on your advice I did some more testing and can confirm that using WinK3Suite
remotely via the RemoteRig K3-T
Graham I do not know what program you are using to operate CW
(perhaps FLdigi) but guessing this for HF.
On eme digital modes have become prevalent and using sw such as
WSJT10 for that one can switch from say JT65 to CW by simple choice
of mode on a drop down menu. I have not operated CW-eme
On Thu,9/22/2016 8:24 PM, Dauer, Edward wrote:
Two thoughts on this . . .
Great observations, Ted! And one more thought, articulated in a novel by
Thomas Wolfe, published in 1940. The title is "You Can't Go Home Again."
The meaning of the title is that we can't go back to where we grew up
(o
I found a set. Thank you to everyone who responded. Looking forward
to sharing my trials and tribulations with the list as I start my
largest kit build to date!
73,
Robert
AD0TA
On Thu, Sep 22, 2016 at 10:00 AM, Robert Forster
wrote:
> Hello all,
>
> First time poster to the group.
> I've been
Two thoughts on this . . .
One is about a book published some years ago titled “Who Moved My Cheese!” It
was aimed at a business management audience, with the message that when the
cheese is in a different place, it really doesn’t make sense to go back to
where it used to be and try to amanag
You haven't adjusted to on-screen technology, because paper technology is
familiar. That was the main point I saw in Guy's note. Many of us hams are hung
up on analog technology, and some of us insist on imposing this on digital
technology such as the K3. We want the K3 to work like the old anal
Doug,
I also have the older DSP board. I elected to add the Low Pass Filter
add-on-board because I was not interested in the extended low frequency
response.
So the proper answer depends on your aspirations - the low pass filter
does provide a definite advantage in high frequency 'hiss'.
73
Hello Doug,
If you are not going for a K3S, the update to newer D version is very
worthwhile. It gives great improvement in the audio (though I still consider
the audio worse than my new generation Icom radio).
However, Elecraft mentioned in the past that the DSP board currently used in
K3S wou
I have an older 2009 K3 without the updated DSP. What is your opinion? Is it
worth the upgrade to the newer D version? Anyone done a comparison?
Doug K6JEY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/ele
Here is a collated list for the last several weeks, of stations checking in to
the weekly
Elecraft SSB Net on 20m (14.303.5) at 18:00z (UTC). The lists for all but last
week
come from regular net control station Eric, WB9JNZ. I hope the formatting
survives
the posting experience.
Please feel
Eric,
As an old duffer who has done lots of scientific writing over the last
60 years, I have never found that I could ACCURATELY proofread from a
computer screen. For some reason, my eye skips over some really howlers
which I do catch in the printed copy. And along with this is the
growin
A very enlightening post, Guy.
Almost every new technology ever invented experiences the same thing. New users
tend to work hard to make the new technology work just like the old technology
did. Instead of developing new procedures to fit very different technology,
they make the new technology
[In the following text, "both the K3 and the K3S" is represented by "K3/S".
Text applicable to only one or the other will be "K3" or "K3S"]
Hi Graham.
With a warm smile, a soft voice, and friendly demeanor. I have had to go
through this post-analog era "de-analoging" my own radio perceptions, and
It should not be necessary to use the "Use CAT commands from file"
option. Set PTT/CAT to "01,Kenwood (newer models)" and check the
"Use PTT" radio button. Set the Comport to the port created by the
K3S.
Set the Soundcard (Select Soundcard) to "Line (USB Audio CODEC)" or
"mic (USB Audio CODEC)
Recently finished the install of the KRX3 receiver and two KSYN3A
synthesizers in my K3. I have had the 2nd receiver sitting in its box too
long, but family problems was the priority the last year or so. When the new
KSYN3a came out, it looked like a good option to install also.
My K3 was a factor
Due to the need to downsize my portable station to travel very small and
light I have decided to replace my great KX3 with a KX2 which is now on
order. This includes the KX3 sn 482, KXAT3 tuner, KXFL3 filter, KXBC3
clock/charger, KX side panels with plexi cover. I would like $1190. I will
reduce by
Quite some time ago I did some tests using FSQCALL v0.24.6 and my K3 TRX.
I used the "Use CAT commands from file" option. In a text file, you have to
define the relevant COM port and CAT parameters. See the help text for
details.
Markus HB9BRJ
--
View this message in context:
http://elecraft.3
You need a new MCU crystal to fix it.
Sometimes it can be recovered by opening the KX3 and heating the crystal
for 30 seconds or so with a soldering iron - but that is a temporary
work-around.
It needs to go back to Watsonville to have the crystal changed.
Contact kx3supp...@elecraft.com to sta
Hello all,
First time poster to the group.
I've been looking at building a K2 to use as an IF rig and I'm really
close to pulling the trigger. I'd like to build this rig with the
bypass headers from unpcbs.com but it seems they are sold out and not
anticipating another run. I'd like to build thi
I bought a used KX3 back in June. It's a very early production device (#109).
Been great all summer as a mobile in my truck. (Just did 1000 miles in the
Salmon Run)
Past two days, it hasn't turned on when I started off to work in the
morning.Yesterday, thought it was a loose connection, opened i
Graham,
You are sending CW with audio tones, so that is a natural consequence.
I suggest the only "fix" is to put the K3S into SPLIT mode, set VFO B
600Hz lower than VFO A and then link the VFOs (LINK is a menu function now).
73,
Don W3FPR
On 9/22/2016 1:37 AM, Graham Alston wrote:
Hi,
I’m
Graham,
DATA-A mode is typically used for PSK-31 and some other digital modes. Try
using CW mode for CW and see if that doesn’t help resolve the issue.
Hope this helps.
73 de,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
10-10 #74624, North Georgia Chapter #2038
PODXS 070 #196
23 matches
Mail list logo