I'm not in Europe but I think the type of air conditioners you are
talking of are the split units that we use almost exclusively in
Thailand. I don't think I've ever seen residential central A/C here.
Common brands here are Mitsubishi, Daikin, Toshiba, and a bunch of
others. Plenty of JA origin
Gernot,
To check for filter attenuation, I suggest you do so in receive using an
audio spectrum analyzer running on your computer to view the filter
amplitude. Feed the K2 with a broadband signal generator although noise
on a portion of a band with no signals will also work.
Compare the amp
I have the same setup here and drive the amp with 5-7 W from K3 to 1 Kw
with MEDIUM setting of the amp.
The amp shows input power very close to that set on K3. My amp is EU
version and it would switch overdrive protection ON if input exceeds 20W.
Check if TUNE POWER of your K3 set to NORMAL i
Hello list,
I recently tried to use my K2 on SSB. To my suprise, there was very
little output. Even with full power it only showed the first bar. I did
some SSB QSOs during the first years...
Digging deeper, I found the DSB signal showed a Vpp of ~1V, but after
the filter the SSB signal was onl
Please reply off list only. For those who want to follow this discussion,
just send me an email and I will be happy to include you on my own little
list, that was established some time ago when I sought advice on replacing
my central A/C system without generating RFI.
After the previous discuss
Yep - ANT1 was the only connection enabled in the Utility. It's a nice
2nd-hand unit and I didn't check that first! Thanks.
Bret/N4SRN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qt
Bret,
Have you tried switching antennas using the KAT500 utility?
If that doesn't work, try setting the KAT500 to the factory defaults using
the utility.
My KAT500 has lost its marbles a couple of times and I find it easier to
just set it back to the factory defaults and retune the memories for the
Wayne, I like the idea very much. Antennas: I have the original multiband BNC
antenna made in England, which is within the dimensions you mention. The
Maldol AH-C14 is much lighter but the Watters-Stanton multi-band tapped coil
could provide additional bands. My only concern would be strain
Could one or more of the ANT connectors be disabled?
KAT500 Utility, Configuration, Edit Configuration, Antennas.
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of MaverickNH
Sent: Monday, September 11, 20
I have a K3S/KPA500/KAT500 setup configured with AUX cables in the Enhanced
configuration. Two antennas are connected to ANT1 and ANT2. The ANT LED is
Green on 1 and when the ANT button is pressed will not select the antenna
connected to ANT2. I can connect each antenna to ANT1 and each works but I
Actually looking at a different brand of transferred for satellite and
terrestrial work both. The transferred list says 28-32 for the XV432 was
wondering if it would go any higher in freq.
Jim Rhodes
On Sep 11, 2017 2:20 PM, "Don Wilhelm" wrote:
> Jim,
>
> The power level can be set up to 120mW
Gets me out of the house, that’s for sure. I’ll be happy to send you the new
code.
Wayne
N6KR
> On Sep 11, 2017, at 12:47 PM, Howard Hoyt hh...@mebtel.net [KX3]
> wrote:
>
>
> Wayne,
>
> That is just plain cool, kudos!
>
> Howie - WA4PSC
>
>
>
> On 9/11/2017 2:27 PM, Wayne Burdick n...
Wayne,
That is just plain cool, kudos!
Howie - WA4PSC
On 9/11/2017 2:27 PM, Wayne Burdick n...@elecraft.com [KX3] wrote:
Use of an HF radio while walking, or at least while standing (perhaps
taking in a view of the great outdoors), is generally referred to as
“pedestrian mobile.” Some oper
Be sure the plug is fully inserted into the jack. Sounds like you have
only one of the two circuits connected. Unless you have set up for left
handed operation the dots should be on the left.
73,
Gus Hansen
KB0YH
On 9/11/2017 1:28 PM, Hayden wrote:
Though I was a CW operator many years ago i
Though I was a CW operator many years ago in the military, I am having to
relearn an old skill. However, the relearning is coming along nicely. What I
find that I have more difficulty with is the complexity of modern ham
operations and equipment. Thinking that I would try to go beyond a stra
Jim,
The power level can be set up to 120mW.
The frequency range is about 2MHz. I recall that initially the internal
2 meter transceiver design was to be for a 50MHz IF, but was later
changed to a 28MHz IF which required switching between 2 crystals to
cover the entire 2 meter band.
That is
Can someone tell me the output range of freq for 10 meter if and power
output level. Using the "a" version.
Jim Rhodes
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Use of an HF radio while walking, or at least while standing (perhaps taking in
a view of the great outdoors), is generally referred to as “pedestrian mobile.”
Some operators even add /PM to identify as such.
Two common forms of pedestrian mobile operation include:
1. HF Pack: This usually imp
I am selling my complete KX3 station. I had planned to use the station as a
portable endeavor when I first started acquiring it in 2013. However, a
fall off the roof of my house has left me with significant orthopedic
sequelae and it is time to sell.
The station has never been outside my radio roo
If you intend to use the KPA1500 as an exciter..what do you plan
to use for the PA?
73
Bob, K4TAX
On 9/11/2017 8:19 AM, Petr, OK1RP/M0SIS wrote:
Hi all,
Is there some beta tester allowed to test the KPA1500 exciter in the
field... any experiences?
http://ok1rp.blogspot.ch/2017/09/l
Curt,
A lot of information can be gleaned from reading the K2 specifications
which say the VFO stability is less than 100 Hz drift typical from a
cold start at 25 degC.
That means yours is well within specification.
That also means you should let it warm up for 15 minutes or so from a
cold s
Hi all,
Is there some beta tester allowed to test the KPA1500 exciter in the
field... any experiences?
http://ok1rp.blogspot.ch/2017/09/looking-for-clean-ss-hf-pa-wqsk-part-5.html
regards,
73 - Petr, OK1RP
-
http://ok1rp.blogspot.com
--
Sent from: http://elecraft.365791.n2.nabble.com/
I built K2 s/n 06424 some time ago, then added KSB2 and finally converted it to
100W a few years ago. Usually used it for CW only, but recently moved it to
main operating position and started using it on 40M LSB mornings. To my
chagrin, received comment few days ago that I was off frequency, an
Hi all,
as Xmas is coming I am looking for KAT1 built/unbuilt for my son's K1. He is
proud owner of his basic K1 40/20m dualbander and he is using it for CW
learning on the air. So I would like to motivate him and give him as Xmas
gift an ATU module upgrade.
Thanks for offers if some getting
24 matches
Mail list logo