I've been having issues getting my MK2 work with a new-to-me K3 and N1MM+
At the moment, CW works as expected, EXCEPT when I use the footswitch. When use
it, the PTT1 light stays lit and the radio goes into transmit and won't get out
of it -- you have to turn off the rig. The PTT! light stays o
A great little radio it is, agreed. I have two of them that I use as I.F.
radios on my 10 & 24GHz portable microwave station setups. They are perfect for
that function, using the 2m option as the I.F. especially when mated with a
PX3. I drag my microwave gear all over the place, including mounta
Come on. This is a great little radio. But it’s designed to be s great “little”
portable radio. How many will carry a 10 MHz ref oscillator to a mountain top.
If you’re looking for a full fledged base station with all the options, get a
K3S.
Sent from my iPhone
...nr4c. bill
> On Jan 21, 20
This should do it. Actually, once the temp comp procedure has been completed,
you’ll have the equivalent of a very expensive TCXO (about +/- 0.2 PPM).
Wayne
N6KR
> On Jan 22, 2018, at 4:59 PM, Dave AD6A wrote:
>
> Thanks Wayne, I'll try doing the extended VFO temp comp procedure. Sounds
> li
Thanks Wayne, I'll try doing the extended VFO temp comp procedure. Sounds like
that will get me close enough.
Cheers,
Dave AD6A
Sent from my iPhone 7 Plus
On Jan 22, 2018, at 8:04 AM, Wayne Burdick wrote:
Hi Dave,
The synthesizer used in the KX3 doesn’t have means for locking to an externa
In my experience, they fail shorted, so it's pretty obvious. Although
the app notes for both the ICE and Array Solutions products say that
they don't always fail shorted.
The design is based on this one, which Array Solutions used to sell, but
the ICE owner died several years ago. The circui
Until K9YC's post I was not aware of the Array Solutions lightning
arrestor. They appear be a nice product. How do GDT's fail - open or
closed? If open, how do you know that they need replacement?
John KK9A
K9YC wrote:
I strongly agree with Bob's advice, EXCEPT that I've gotten really tired
of r
Not just mode but mode and each data mode too.
So would somehow automatically adjust the KPA500 base fan setting to be
mode dependent (mode from K3). The various K3 data modes would most need
to allow separate values. I do a lot of mode switching and like to keep
the KPA500 base fan setting a
I cannot find a way to have the K3S remember the power setting per mode.
When switching from Digital modes to CW and having to set the power level
each time is a pain. It would certainly be a welcome feature at this QTH if
the K3S remember the last power setting for each mode as well as each band.
Hi Dave,
The synthesizer used in the KX3 doesn’t have means for locking to an external
reference. However, if you do the extended VFO temperature compensation, then
calibrate the reference to WWV (etc.), you’ll typically be within +/- 1 or 2 Hz
of your actual target frequency on all bands, over
Nominal drive power is 50 watts in for 1500 watts out. As with virtually all
other amplifiers, drive power requirements can vary from band to band.
73,
Wayne
N6KR
> On Jan 22, 2018, at 3:48 AM, Petr, OK1RP/M0SIS wrote:
>
> Just FYI,
>
> http://www.eham.net/reviews/detail/13702
>
> Also I a
I bought a couple of these (TT3G50) from DX Engineering. Unscrewed the gas
discharge plug, took a look and some photos of the inside construction, and sent
them back. Simply awful, (Alpha-Delta, not DX Engineering) BTW, the only
"protection" is a 1000V breakdown gas discharge tube with quest
Just FYI,
http://www.eham.net/reviews/detail/13702
Also I am interesting in comments about the driving power thru bands.
73 - Petr, OK1RP
-
http://ok1rp.blogspot.com
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft
Straightforward answer:
Use a simple mixer with L/R audio gain controls.
73,
Alan. G4GNX
-Original Message-
From: Carl Clawson
Sent: Sunday, January 21, 2018 11:32 PM
To: elecraft
Subject: Re: [Elecraft] AF Balance
...if I could just make my right
Good to see the first reviews!
Can someone comment on the drive requirements?
The FCC document lists a worst case of between 75 and 80W input for 1500W
output on some bands. This might be close to the limit of some exciters in
RTTY. However, this is still less than the PowerGenius XL which seem
15 matches
Mail list logo
