Thanks to all. It was in the config menu.
73, John N1JM
John_N1JM wrote
> When firing up my PC with K3s attached and on, the K3s trips into transmit
> a
> couple of times. Is that normal?
>
> 73, John N1JM
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> __
I've been off the air for about three years working on our business and
other projects and have the following for sale as virtually unused:
Elecraft KX3 with just about every option available already installed.
Included is the KX3 with KXAT3 Automatic Antenna Tuner, KXFL3 Dual Passband
Roofing F
I would like to unsubscribe to all your lists and mailings. rafa...@att.net
Thanks
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:E
>From the description of K3 firmware update dated 8-3-2015
MCU 5.33 / DSP 2.86 / FPF 1.23
PC applications can activate PTT and KEY at the K3S via the USB
port's RTS/DTR signals. However, initial setup of the rig's USB port
by the PC may cause pulsed or continuous activation of the transmi
Go to CONFIG:PTT-KEY, tap the 1 key and set USB.SAFE.
Cheers,
Fred KE7X
For all KE7X Elecraft books, see www.ke7x.com
From: elecraft-boun...@mailman.qth.net on
behalf of Mike Flowers
Sent: Thursday, February 8, 2018 3:56 PM
To: 'John_N1JM'
Cc: elecraft@mail
All,
The alternative is to switch on computer first, then your K3.
Of course you need to remember to do that, though ...
de VK2HHS
Sent from my iPhone
> On 9 Feb 2018, at 10:05, Brian Hunt wrote:
>
> Yeah, unfortunately it is. It's Windoze checking out the serial port
> connection. You c
The resistor is in series from a 5 vdc source. The pod takes alternatively
about 50 ma from 9 to 15 vdc. So I would think any resistor from 6.8 to maybe
up to 10.
Chuck Hawley
c-haw...@illinois.edu
Amateur Radio, KE9UW
aka Jack, BMW Motorcycles
From:
No need to go into the Config menu. Put the 'Test' function on by holding
the Mode^ key. Start up the PC and no TX will occur.
Just don't forget to take the Test mode off again before calling that rare
DX - ask me how I know...
HTH
73, David G3WGN M6O
k6mkf wrote
> Yes, it's normal. There is
Yeah, unfortunately it is. It's Windoze checking out the serial port
connection. You can avoid the problem by setting CONFIG:PTT/KEY to
OFF/OFF. I have one of the PF keys programmed to access that menu item
so I can set it up on the rare occasions I use computer keying (N1MM+).
Sorry I mash
Yeah, unfortunately it is. It's Windoze checking out the serial port
connection. You can avoid the problem by setting CONFIG:PTT/KEY to
OFF/OFF. I have one of the PF keys programmed to access that menu item
so I can set it up on the rare occasions I use computer keying (N1MM+).
On 2/8/2018
Not so David. Most of Europe has 1kW or 1.5kW limits. So no surprise that
there has been much interest from Europe.
73, David G3WGN M6O
David Pratt-2 wrote
> I am not sure that many people would need one in Europe, Tony. At
> least, in the UK we are only licensed for 26dBW (400W) so the KPA5
Yes, it's normal. There is a config parameter you can set to eliminate
this behavior.
I can't think of it at the moment, but someone on this list will surely
remember what it is.
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
> -Original Message-
> From: elecraft-boun...@mail
When firing up my PC with K3s attached and on, the K3s trips into transmit a
couple of times. Is that normal?
73, John N1JM
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailm
Hello to all,
This saturday I decided to install in my k3s the second receiver KRX3A with two
filters and the KDVR3 that I bought last month.
In the future, hope very near, I am interested to buy also a k-pod.
I read the k-pod manual and I seen that to power the k-pod directly from the
data Port
I found my answer on the elecraft.com software page in the bullet-list
under the latest revision.
To link a P3 function key to a Macro, you manually (using a keyboard)
enter the macro, go into the P3 menu, SVGA menu and use the Select Knob
to get to Macro, select the macro (mem) you want and t
Hi David,
We've actually had a large amount of interest from Eu, especially from Germany
and other countries.
73,
Eric
/elecraft.com/
On 2/8/2018 12:57 PM, David Pratt wrote:
I am not sure that many people would need one in Europe, Tony. At
least, in the UK we are only licensed for 26dBW (4
Paul Saffren N6HZ posted here in October 2016 that the next release of
the P3 firmware would allow you to associate a front-panel FN key with a
Macro. Does anyone know if that ever happened? I manually entered a
long macro as a test but I don't see any way to execute it.
I entered it manuall
I am not sure that many people would need one in Europe, Tony. At
least, in the UK we are only licensed for 26dBW (400W) so the KPA500
would be more than adequate.
73 de David G4DMP
In a recent message, Tony G6GLP writes
>Its great to hear the major shipping has started of the KPA1500 and the
>
Guys
I ordered this 6pole, 400hz filter by mistake. My mistake, so I would like to
make someone a deal 145.00 and I ship. Doug WD8Z
Sent from Mail for Windows 10
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Its great to hear the major shipping has started of the KPA1500 and the
next question to ask is how long will it take to get over the initial
order inrush and then move on to offering World wide well at least Europe?
73 de Tony G6GLp
---
This email has been checked for viruses by AVG.
http:/
Wow! What a great story! A watt's a watt!
George NE2I
On Thursday, February 8, 2018, 11:26:10 AM CST, Wayne Burdick
wrote:
Hi all,
This short story about a hunting trip gone awry is definitely on-topic:
http://www.elecraft.com/fiction/Maj%20Sheldon's%20Last%20Watt.We’re posting
it
Last night we updated the shipping status page with KPA1500 shipping status.
http://www.elecraft.com/elecraft_shipping_status.htm
We received a huge number of orders over the first couple of days (8/24 and
8/25) and the order rate was strong for quite some time after that. (The number
of orders
WOW! Now THAT Em-com! Life was long enough for QRP!
73!
Tom - KB2SMS
On 02/08/2018 12:22 PM, Wayne Burdick wrote:
Hi all,
This short story about a hunting trip gone awry is definitely on-topic:
http://www.elecraft.com/fiction/Maj%20Sheldon's%20Last%20Watt.pdf
We’re posting it with permi
Nice! Good short one.
KD4IZ
Jack
Sent from my iPad
> On Feb 8, 2018, at 12:22, Wayne Burdick wrote:
>
> Hi all,
>
> This short story about a hunting trip gone awry is definitely on-topic:
>
> http://www.elecraft.com/fiction/Maj%20Sheldon's%20Last%20Watt.pdf
>
> We’re posting it with permiss
Hi all,
This short story about a hunting trip gone awry is definitely on-topic:
http://www.elecraft.com/fiction/Maj%20Sheldon's%20Last%20Watt.pdf
We’re posting it with permission of the author, W. A. Taylor.
73,
Wayne
N6KR
__
Elec
Long Delayed Echos. Propagation is really screwy!
Tongue in cheek.
W4CWZ
On 2/7/2018 11:49 AM, Mark via Elecraft wrote:
Re: Am I the only one being bombarded by old posts? 50+ turned up this
morning...
Same here. This has been going on for several days, and I am even getting
duplicate ol
> What is surprising, however, is that everything works equally well
> whether MIC BIAS is On or Off.
Bias to the electret element is not supplied by mic line - it's supplied
from the tone generator IC! The tone generator supplies voltage when
no buttons are pushed which enables the mic. When
I’m thinking that the bias on/off is a voltage applied to the mic lead, pin 1.
That works for some xlr hookups. I was thinking that pin 5 for the kenwood
(also) powers the amp in the base of some of the kenwood mics. The pin 5 or 6
voltage is on all the time.
Chuck Jack
Ke9uw
Sent from my iPho
Thanks for all the great ideas on case's and back packs. Now to sift
through them and make a decision.
73,
Rich - N5ZC
On 2/7/2018 3:27 PM, Richard Thorne wrote:
I've seen a few neat ideas on how to carry/use a KX2 in the field.
I just picked up a very nice KX2 (Thanks WB5XX) that I plan on
I have searched the archive and I cant find what my memory tells me I saw! I
recall someone with a close neighbour operator having photos on the impact of
the other operator and themselves before and after the synthesizer upgrade. I
would very much like to have copies of those photos for a talk
I carry my K2/100 in a Tenba BY09 camera bag, and put that inside a Mindshift
Rotation 180 backpack along with my KAT 100, a Vibrokeyer (in a Lowepro case),
the MFJ 818 swr/wattmeter, and a RigExpert AA-30 that is perfect for carry on
luggage. The power supply, and Buddipole goes in checked lugg
I am delighted to report back that changing the wire from pin-5 to pin-6
has done the trick. DTMF tones work fine on the K3 as do also the UP and
DOWN buttons with MIC BTN On in the CONFIG menu. The DTMF tones also
work on the K2.
What is surprising, however, is that everything works equally well
Thank you, Joe, Don and Chuck Jack; the mic is an MC-48 which is shown
as an electret on the schematic. I shall certainly swap the plug
connection from pin-5 to pin-6 and give it another go. I note that the
UP and DOWN buttons give some strange effects so those need my attention
too.
73 es tnx agn
First of all I¹m new to this forum having just taken delivery of a KPA-500
and KAT-500 pre built by the Distributors in the UK.
What has surprised me is that when either tuning or operating the KPA-500
with WSJT-X there is a very noticeable buzzing noise, not a transformer
hum, from the unit. The
Check Online for Drone backpacks and cases from DJI etc. They are very
reasonably priced and have compartments for small drones, batteries, remote
control, etc.
Vy 73 de Bob DJ0RD/WU5T
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On
Run the RF gain routine in the K3 utility on the sub receiver
k4ia, Buck
K3# 101
Honor Roll 8B DXCC
EasyWayHamBooks.com
On 2/8/2018 1:26 AM, Scott wrote:
You may want to check that NR is the same (on or off) for both
receivers. In my experience you may have NR off for the main and NR on
for
36 matches
Mail list logo