Looking at the MECC map, I’m pretty sure the 500 KV line is +- 500 KV DC so
that would by itself make it pretty quiet.
Sent from my iPad
> On Jun 15, 2019, at 7:34 PM, Fred Jensen wrote:
>
> I have never found a noise blanker to be of particular value, if any at all,
> on general power line
Wes, maybe I read your email wrong, but you implied that setting up
the com0com pairs was a PITA. You used the acronym PITA and I assumed
you were talking about com0com. That's why I commented that you
actually do not need to look at the device manager because it appears
that confused you. Like
Good Evening,
Solar conditions are little different than they have been for
weeks. We're due to enter another stream of ions which will keep us in
business for a while. I will continue switching between antennas to see
how they compare.
I mentioned the black bear to my neighbor who
The Bengali key has sold
Thanks
Marv
From: marvwhee...@nwlink.com
Sent: Thursday, June 13, 2019 9:40 PM
To: 'Elecraft@mailman.qth.net'
Subject: Bengali adventurer mono key with KX3 mount
I have a Bengali Adventurer Mono key in the original box with a mount for
the KX3. It is
Max,
I'm not necessarily set on using LP-Bridge, although it is suiting my needs. As
to its age, my logging program hasn't been updated in 12 years and it still
works fine. I don't have a problem with the start up time, generally, the
computer is on all of the time and my programs are all
You need to back down the level out of the computer. Also the PWR level in the
software, which is actually audio level , needs to be backed down. This
should allow you to run the Line Gain at 25 to 35. Never run any of the
controls or levels at maximum or near minimum. Mid range is best
Go to the Win10 volume mixer. Turn down the wsjt slider to about 30% from the
bottom. Now the K3 Lin In control will have the proper adjustment sensitivity.
Sent from my iPhone
...nr4c. bill
> On Jun 15, 2019, at 7:43 PM, Gary Smith wrote:
>
> Something new has come up with the
> K3s/JTDX
Had almost the same thing happen after the update.
Make sure that WSJT-X is using the correct Audio codec.
The slider in WSJT-X for output will override windows sound settings.
Thanks,
Hank
K3S, PS, KX3
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Gary Smith
Something new has come up with the
K3s/JTDX settings and I can't find where
to adjust it to make a change. This is
new, it has been fine till a couple days
ago & maybe the recent win 10 update
nailed me again?
Till now, when setting the levels for Tx
for FT8, I would adjust the setting on
I have never found a noise blanker to be of particular value, if any at
all, on general power line hash [the "grass" along the baseline of a
panadapter. At our prior home in Auburn CA, I had a 3-phase ~70 KV
transmission line on running across the lower end of the property that
connected a
Wes, I think you are pretty well set on the continued use of LP_Bridge.
Keep in mind that Larry hasn't touched / updated LP_Bridge for 3.5 years,
plus it's painful to wait for it to start up the virtual eltima IMHO. You
just do not get true virtual K3 CAT instances with LP_Bridge that support
Thanks for all the great responses. Seems I was on the right track. Fred's
book mentions that some day the ATU TUNE may control the KAT500 and that
had me wondering if I had something wrong.
Everything trained up nicely and I think I have the per-band op/stdby
powers set right. The KAT500 is in
I just got the second aux cable and have the physical setup completed
according to the docs.
The only configuration item that I changed was to set KAT500Y in
CONFIG:KAT3. The K3s ATU is in bypass mode.
I expected to be able to hit the ATU TUNE button on the K3s and initiate a
tune through the
Hello,
Finally finished the resurrection of an old K2 for my shop use,
but I need the missing metal pieces:
Both sides,
Bottom (front only) with the tilt stand
They don’t need to be pretty: I can touchup paint if it’s really bad.
Reply off list of course.
Many thanks,
Alan
Looking for KANT3. Please respond OFF list.
Ben W4SC
Sent from Mail for Windows 10
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Never mind. I was not in LSB. I was in Data. Makes perfect sense why it
wouldn't apply to the present context.
Lovin' the radio. Taking a little time to learn all the ins and outs.
Kev N4TT
On Sat, Jun 15, 2019 at 1:03 PM Kevin, N4TT wrote:
> I have the proset-k2 running off the rear panel
I have the proset-k2 running off the rear panel mic/phone jacks. It sounds
fine on mon (too mic shy to test on air) but I'd like to adjust the
equalizer settings for Rx and Tx to get a feel for them.
For RX, as an example, I press the 1 button and see 0.05 +0. When I try to
adjust the VFO to
From a source and a friend of mine, KE4PT.
F Y I -
{quote}
In article by two well-known radio amateurs, “Tuning Electrically Short
Antennas for Field Operation,” appeared in Microwave Journal. Authored by QEX
Editor Kai Siwiak, KE4PT, and award-winning researcher Ulrich Rohde, N1UL, the
Richard,
as you're in UK, you may also try to contact QRP Project in Berlin,
Germany. They're doing the official Elecraft support for Europe and it
might be quicker than sending the TRX to US
Hope this helps
73 Thorsten, DH4FT
Am 13.06.19 um 14:45 schrieb Don Wilhelm:
Richard,
I suggest you
Thank you sir for the update!!
Hank
K4HYJ
K3S, P3, KX3
From: Peter J. McClosky
Sent: Wednesday, June 12, 2019 5:44 PM
To: Hank
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 40 meter AX1
When I spoke to them late last month, they said they were shooting for mid
September.
Those transceivers are noted to have that issue. They are very popular
and there are thousands of them on the air today. And we are always
concerned better receivers. How about cleaner transmitters. That
company did correct the problem but only with releasing a new model.
You aren't the
Would having if be a deal breaker?
Mike
Sent from my iPad
> On Jun 15, 2019, at 6:59 AM, Dave wrote:
>
> I’ve not seen confirmation as to whether the K4 uses pre-distortion to
> improve the TX IMD levels. The inclusion of a sample input socket suggests
> it does. If so, does a barefoot K4 use
I’ve not seen confirmation as to whether the K4 uses pre-distortion to
improve the TX IMD levels. The inclusion of a sample input socket suggests
it does. If so, does a barefoot K4 use pre-distortion and will there be a
mod kit for the KPA500 to provide a sample output?
73 Dave
--
Sent from my
Over the years I have been bitten by some tenacious flying insects. The
tiniest are the no-see-ums. They will drive you crazy. The largest
were in Arkansas. I swear their mosquitoes were as large as small
sparrows and could take a pint of blood at each involuntary donation.
But the
24 matches
Mail list logo