I was writing about a K3S, but just for you I powered up the K3 that I keep as a
backup and it works too. Are you appending the semi-colon?
BTW, my K3S F/W is 5.62 and the K3 is 5.0.
Wes
On 9/25/2019 3:53 PM, Kidder, George wrote:
GE Wes - Is your success on a K3 or K3s? Just installed
Well, now, I am both confused and eating crow! Now it is working as
expected. I have no idea what I was doing wrong before. Both the VOX
function and the indicator are now going on with VX1;.
Talk of a tempest in a teapot!
73 and thanks - George
On 9/25/2019 7:22 PM, Dick Dievendorff
Setters don't respond. Try ^VX1; and then follow it with ^VX; to see what it
set.
rvm; <_ commands in lower case
RVM05.67; <- responses in upper case.
vx;
VX1;
vx0;
vx;
VX0;
vx1;
vx;
VX1;
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of
GE Wes - Is your success on a K3 or K3s? Just installed latest firmware
(5.67) and there is still no SET response to "VX1", although "VX" does
GET the state. Just like Don said, but this is not what is in the manual.
George
On 9/24/2019 2:27 AM, Wes wrote:
> [This message came from an
I went ahead, bit the bullet, and recalibrated opposite receive sideband
suppression on the KX3. It was substantially off with both FL3 and FL2. With
FL2 I was able to get a very good null. With FL3 the null was quite shallow,
but better than before. Not sure if the FL3 situation indicates
I have serial # 1866. I am the second owner, and Elecraft paperwork I received
with the unit shows the unit was returned to Elecraft for “PA DISS Fault on 20M
and 6M, with D10 and L6 being replace.
In addition , under warrantee, the T/R switch was updated ( Rev E?? ), and the
12M mod was
I have an early KPA500, and it works flawlessly. Is this mod recommended by
Elecraft on ALL amplifiers that presently have Rev. D ? This mod requires
considerable disassembly, and I don't want to do it unless it is highly
recommended. Please state the specific reason for this mod. Thanks.
I’ve noticed (usually on 20M) that with the KX3 preamp OFF and a strong USB SSB
signal tuned, that there is a LSB “shadow” on the left side of the cursor that
shows up on the PX3 display, some dB down from the tuned signal. This does not
appear if the KX3 preamp is turned ON.
Would this be
Buck,
unfortunately I have not info about the s/n relate to revisions of the
PA/LPF boards.
The best way would be to ask Elecraft service for that.
I know that rev. D or earlier revisions could be modified if needed.
-
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
K2 s/n 5035
KPA 100 Amplifier
KNB2 Noise Blanker
K160RX 160 meter module
KAF2 Audio filter and Real-Time Clock
KI02 RS-232 Interface and Aux I/O
K60XV and Transverter Adapter
KSB2 SSB Option
$1000 plus shipping
Please contact me off list at K8DIO (at) roadrunner.com
Lloyd
10 matches
Mail list logo
