On 9/24/2020 4:21 PM, David Haines wrote:
> One of my engineer sons sent me the following link about Furniture ESD.
> Is it for real? Is this something else we have to worry about while
> using our new K4's?
The document said in part "The only clue to the problem was that the
malfunction
Need a little help. I just bought a KX3 and have it working OK. I also have a
45w amp that I would like to work with the kx3. However, with no info on the
keying line coming from the amp, I have no idea if its Ok to use. I see in the
Elecraft manual that the "keyline" and tip would be used to
Fred's book states that if you have a jack plug into the LINE IN then
the USB audio is disconnected. At least I think that is what he means.
I receive audio via the USB just fine with a plug in the LINE IN jack
What am I missing?
Rich
K3RWN
Does the K4 support IPv6?
73 de AI6KG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Like most of you, I can't wait to get my hands on a K4, but it will be
the kit form, which will be awhile.
Meanwhile I want to toss out something about RFI, which of course can be
an issue for a really sensitive transciever like the K4.
One of my engineer sons sent me the following link
I want to hazard a guess in saying that if they're just getting the manuals
out, then NO. But I would hazard an opinion that they are very close..
Paul KB9AVO
On Thu, Sep 24, 2020, 4:47 PM Jim Borowski wrote:
>
> Still wishing and hoping. Jim K9TFSent from my T-Mobile 4G LTE Device
>
VERY cool ...
Thanks es 73,
Dave AB7E
On 9/24/2020 12:30 PM, Wayne Burdick wrote:
IQ streaming data from the K4 will be available over Ethernet.
Wayne
N6KR
elecraft.com
On Sep 24, 2020, at 12:14 PM, David Gilbert wrote:
Except that an I/Q output would also enable the
ISTR you remove the center strengthening bar (plain aluminum) and it
will probably help to remove the side panel. Then it's a matter of
gentle 'wiggling'.
73,
Alan. G4GNX
-- Original Message --
From: "Grant Youngman"
To: "Tom Fitzpatrick"
Cc: "Elecraft Refl"
Sent: 24/09/2020
Have you looked at the manual? You can follow the installation instructions in
reverse …. might give you a hint.
> On Sep 24, 2020, at 5:26 PM, Tom Fitzpatrick via Elecraft
> wrote:
>
> Can anyone tell me the secret to pulling the KAT3A tuner card out of a
> K3? I changed it out once
Can anyone tell me the secret to pulling the KAT3A tuner card out of a
K3? I changed it out once for the newest version but forgot how I did it. Part
of th chassis frame stops the board from being pulled out.
Tom, K4IE
__
Excellent! I'm looking forward to generating many new synapses!
Roy, K6XK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Still wishing and hoping. Jim K9TFSent from my T-Mobile 4G LTE Device
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Impressive. I can see a lot of work went into this (I was a former
tech writer for Hughes Aircraft 1968-71). If I could afford it, I
would be on board to order the K4D when the VHF/UHF modules are
available. My K3/10 (SN-4340) does well for me, though.
73, Ed - KL7UW
http://www.kl7uw.com
Can't find the Y cable any longer on the Elecraft web site. Where is it
hiding?
Jim ab3cv
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
My computer monitor has finger smudges on it now
Lou, W0FK
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
IQ streaming data from the K4 will be available over Ethernet.
Wayne
N6KR
elecraft.com
> On Sep 24, 2020, at 12:14 PM, David Gilbert wrote:
>
>
> Except that an I/Q output would also enable the convenient use of other 3rd
> party software. If Elecraft didn't bother to include it in
Except that an I/Q output would also enable the convenient use of other
3rd party software. If Elecraft didn't bother to include it in the K4,
I think that's a mistake.
Dave AB7E
On 9/24/2020 11:58 AM, Buck wrote:
As I recall, there is an HDMI output on the back of the K4. You can
Since the off topic posts seem to mostly come from the same culprits,
sorting by sender might be a good alternative.
Dave AB7E
On 9/24/2020 9:12 AM, Mike Harris via Elecraft wrote:
Hi,
And a perfect example of why email sorting on subject doesn't work.
Regards,
Mike VP8NO
On
As I recall, there is an HDMI output on the back of the K4. You can
choose to have it display the front panel, the panadapter or both on an
external monitor.
You won't need to use I/Q to an LP-PAN.
Buck, k4ia
Honor Roll
8BDXCC
EasyWayHamBooks.com
On 9/24/2020 2:51 PM, Brian wrote:
Looking
First glance, it is really well done. I love the yellow arrows and hate
it when a manual says push the X button but you have no idea where the X
button is.
Buck, k4ia
Honor Roll
8BDXCC
EasyWayHamBooks.com
On 9/24/2020 1:49 PM, Wayne Burdick wrote:
The first draft of "Introduction to the
Looking at the recent (though long from complete) K4 guide, I don't see an IF
OUT per se as I have in the accessory board in my K3 (or in fact the output I/Q
from the KX3 I can run directly into my sound card on the computer). Does
the XVTR IF OUT suffice for this?
The reason I ask is
Very nice intro, thanks! de tom w7sua
On 9/24/2020 10:49 AM, Wayne Burdick wrote:
The first draft of "Introduction to the Elecraft K4" is now available, at:
https://ftp.elecraft.com/K4/Manuals%20Downloads/Introduction%20to%20the%20Elecraft%20K4,%20rev.%20A-7.pdf
This is a 40-page,
The first draft of "Introduction to the Elecraft K4" is now available, at:
https://ftp.elecraft.com/K4/Manuals%20Downloads/Introduction%20to%20the%20Elecraft%20K4,%20rev.%20A-7.pdf
This is a 40-page, full-color manual with dozens of illustrations highlighting
the K4's user interface and
[End of Thread] due to way OFF topic drift.
73,
Eric
List moderator, among other daily mayhem..
elecraft.com
_..._
> On Sep 24, 2020, at 9:50 AM, Alan - G4GNX wrote:
>
> It really would help if folks were not too lazy to change the subject line
> to reflect the actual content. Then we could
It really would help if folks were not too lazy to change the subject
line to reflect the actual content. Then we could all decide for
ourselves whether to bother to start reading it.
73,
Alan. G4GNX
-- Original Message --
From: "Jim Sheldon"
To: "Charlie T"
Cc:
Gotta have something to do waiting for our K4s.
Sent from my iPhone
...nr4c. bill
> On Sep 24, 2020, at 11:41 AM, Jim Sheldon wrote:
>
> What, may I ask do these cigarette posts have to do with Elecraft radios?
> You guys are WAY out of line.
>
> W0EB
>
> Sent from my iPad
>
>> On Sep
Hi,
And a perfect example of why email sorting on subject doesn't work.
Regards,
Mike VP8NO
On 24/09/2020 12:43, KENT TRIMBLE wrote:
What all this has to do with Elecraft is beyond me. Good thing the K4
is keeping Eric occupied.
73,
Kent K9ZTV
This item has been sold (in record timethank you!).
On 9/24/2020 9:50 AM, Gene Sochor wrote:
New, never used, still in original carton, MicroKeyer II with K3
cableset, external CW/voice memory keypad & CD.
$250 including shipping within USA. Was $430+ when purchased. PayPal
accepted. N9SW
The advertising slogan meant, "Lucky Strike Means Fine Tobacco." But
during the Truman administration it came to mean "Leave Some Meat for
Truman" in response to a proposal urging American families to forego the
consumption of meat two days a week.
Gotta love bureaucrats.
What all this has
What, may I ask do these cigarette posts have to do with Elecraft radios? You
guys are WAY out of line.
W0EB
Sent from my iPad
> On Sep 24, 2020, at 10:38 AM, Charlie T wrote:
>
> The circle was always red.
> What changed was the green package (Chromium) and gold (Copper) stripes.
>
The circle was always red.
What changed was the green package (Chromium) and gold (Copper) stripes.
Although it was more a marketing ploy, which worked by-the-way, than a real war
effort.
73, Charlie k3ICH
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Nr4c
I remember, but do you know WHY the green "went to war"?
(Don't cheat and look it up.)
Charlie k3ICH
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Nr4c
Sent: Thursday, September 24, 2020 9:54 AM
To: Dave Cole
Cc: elecraft@mailman.qth.net
Subject: Re:
I always figured they wanted the dye for camouflage. But the real reason was
marketing. Women didn’t care for the old packaging.
Sent from my iPhone
...nr4c. bill
> On Sep 24, 2020, at 10:03 AM, Charlie T wrote:
>
> I remember, but do you know WHY the green "went to war"?
> (Don't cheat
I'm impressed Bill! :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 9/24/20 8:20 AM, Nr4c wrote:
Sorry. I just realized the original package was green and changed to white, not
Sorry. I just realized the original package was green and changed to white, not
the circle which has always been red.
Sent from my iPhone
...nr4c. bill
> On Sep 24, 2020, at 9:56 AM, Nr4c wrote:
>
> Who remembers “Lucky Strike green has gone to war.” When the green circle
> changed to
New, never used, still in original carton, MicroKeyer II with K3
cableset, external CW/voice memory keypad & CD.
$250 including shipping within USA. Was $430+ when purchased. PayPal
accepted. N9SW Gene Phone 630-497-2999.
__
Elecraft
Who remembers “Lucky Strike green has gone to war.” When the green circle
changed to red.
Sent from my iPhone
...nr4c. bill
> On Sep 24, 2020, at 8:37 AM, Dave Cole wrote:
>
> LSMFT... Remember that one? The clean version that is...
>
> 73, and thanks,
> Dave (NK7Z)
>
LSMFT... Remember that one? The clean version that is...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 9/24/20 5:18 AM, Nr4c wrote:
“I can’t believe I ate the whole thing”?
“I can’t believe I ate the whole thing”?
Sent from my iPhone
...nr4c. bill
> On Sep 24, 2020, at 7:51 AM, Dean L wrote:
>
> Only about 35 years...
> I too thought I don't remember the commercial, but I do remember the woman
> breaking the glass with her voice.
> And the "cool" guy in the
Only about 35 years...
I too thought I don't remember the commercial, but I do remember the woman
breaking the glass with her voice.
And the "cool" guy in the overstuffed chair, the music blowing his hair
back and his wine glasses to his hand
You've come a long way baby!
73
Dean
On Sun, Sep 20,
40 matches
Mail list logo