Re: [Elecraft] Command inputs for Wilderness/Norcal KC1?

Hi Wayne, Would you be able to also send me the KC1 documentation? This 4-year-old thread is the only discussion of the documentation that I'm finding with google. Thanks, Scott Rice KB8VWM wayne burdick wrote > Hi John, > > I wrote the manual (and the firmware), so I have all the original

[Elecraft] [K2][K1] Legacy Tuneups, Rescue, Build Services

  "W3DVX Rescues Legacy Elecrafts" Hello, Does your K1 or K2 need repair? Tuneup? Want to sell, but it needs some attention before offering it for sale? In addition to tuning your rig, I can also rescue a building project you might have started some time ago. See what my

Re: [Elecraft] KPA500 Port problem

When does it disconnect? Does it disconnect if you don't transmit? Does it disconnect if you transmit with the KPA500 in standby? Does it disconnect if you transmit with the KPA500 operating? Does it matter which band you are on? If the answers to the above are different, you may have an RF

Re: [Elecraft] KPA500 Port problem

Tim, Why don’t you try using the KPA500 remote software instead? Here is the link: https://elecraft.com/pages/kpa1500-kpa500-kat500-remote-software Raj, N2RD > On Mar 3, 2021, at 11:45 AM, Tim C wrote: > > I live in a

[Elecraft] KPA500 Port problem

I live in a nursing home and am mobility impaired and must control my KPA500 with my computer. I saved for over a year for the amp. My KPA500 will stay connect to my computer for <2 min and the Utility locks up and the only way to get it to load again is to re-boot the computer. The error

[Elecraft] KPA500 Port problem

I live in a nursing home and am mobility impaired and must control my KPA500 with my computer. I saved for over a year for the amp. My KPA500 will stay connect to my computer for <2 min and the Utility locks up and the only way to get it to load again is to re-boot the computer. The error

Re: [Elecraft] K3 with KSYN3A 100Hz spurious

I need to apologise to the group and to my old K3... the problem wasn’t the K3 after all. It turned out to be my Icom IC-7300 displaying an S9 carrier from the K3 as having 100Hz sidebands and also producing a loud buzz from the speaker. Feeding the 7300 with an S9 level from a signal generator