I have my KPA500 for sale. My location is NJ
John, AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by
I looked at the link given in part of this discussion regarding efficiency
and dissipated power data at various output levels. Very revealing.
During a recent virtual hamfest I spoke to the Elecraft designer of the
KPA1500 and he confirmed that the heat dissipated remains nearly unchanged
whether
I've had the same effect by setting the K3's Alarm to ON then turning
off the p/s. When the p/s is turned on again (and maybe the K3 Power
button pressed; I forget the exact sequence now) the LCD backlight comes
on. So, you might want to check the Alarm setting.
73,
Drew
AF2Z
On 09/16/21 18:
When I plug the ACC connector cable for the KPA1500 into my newly
acquired spare K3, the POWER button doesn't shut off the backlight in
the display or the P3 that's connected to it. As soon as I remove that
connector or shut off the PS, it powers down normally.
This doesn't happen with the ot
The problem of using a standard cable with the serial port is not that
it might fail to operate as a serial port, but rather than it might
permanently destroy the (non-RS232) internal signalling within the
transceiver.
...
In fact there seem to be two pins that are used for signals that cannot
t
5 matches
Mail list logo