Re: [Elecraft] Subject: KPA1500 Power Level

2021-09-17 Thread Eric Norris
I've found the KPA1500 runs cooler (and resulting quieter fan noise) at 1500w than at 1000w on CW. Noticeably cooler. 73 Eric WD6DBM On Thu, Sep 16, 2021, 5:28 PM Steve Hall <99sun...@gmail.com> wrote: > I looked at the link given in part of this discussion regarding efficiency > and dissipated

[Elecraft] K4 Programmer's Reference updated (rev. B14)

2021-09-17 Thread Wayne Burdick
The K4 programmer's reference has been updated to rev. B14. It can be found on our K4 documentation page: https://elecraft.com/pages/k4-high-performance-direct-sampling-sdr-manuals This will be of interest to anyone using K4 or K-Pod switch macros or developing K4-compatible applications. Re

Re: [Elecraft] K3 Display Won't Shut Off

2021-09-17 Thread Jack Brindle via Elecraft
VGA cables are incompatible with the KPA500 and KPA1500. You will need a straight-through cable. BUT, you also need some pins removed. The power pin of the K3 is not compatible with the power pin of the KPA500 or KPA1500, and will result in the problems you have seen. The cable is described in t

Re: [Elecraft] K3 Display Won't Shut Off

2021-09-17 Thread Jim McCook
Now I see what's going on.  Originally I used the Elecraft cable between the K3 ACC and the KPA1500 and everything was OK.  The K3 could be powered down normally.  When I moved that K3 to a spare position, that cable wasn't long enough, so I ordered an extension VGA cable.  This is when the pro

Re: [Elecraft] K3 Display Won't Shut Off

2021-09-17 Thread Ray
Yes, Alarm and Remote Operations Settings. Ray WA6VAB K3 Windows 0 From: Drew AF2Z Sent: Thursday, September 16, 2021 5:13 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Display Won't Shut Off I've had the same effect by setting the K3's Alarm to ON then turning off the p/s. When