Andy:
Thanks for the update!
73,
Barry, WD4ASW/1
> On Oct 7, 2021, at 8:07 AM, Andy Durbin wrote:
>
> "Could you note some of the ‘fixes’ that are not noted in the release notes?"
>
> Here is a more complete list:
>
> * An enabled antenna is not selectable with mode BYP
>
> * F; interrogat
One of the first clues to look for in regard to the audio level out of
the computer being low is the PTT LED on the Signalink USB does not
illuminate on transmit command from the software.
A second thing is to check the CODEC to see that the correct one is chosen.
If one has the PTT LED illumi
Hi Andy,
No, not with the beta, that is untested at this point. I need to move
the new software into the KAT then test again... Thank you for asking!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Techn
On 2021-10-07 9:56 AM, Carter Craigie wrote:
NO red transmit LED on the SignaLink USB, nor any transmitting bars
show on the K2. No Problems with the receive. And the K2 responds to
commands from the computer, such as changing frequencies and such.
The Signalink is a brain dead external sou
"If I use any sort of fast turn around transmit/receive cycle software,
like VARA, under Winlink, or ARQ type software modem, the tuner tries to
re-tune every time a most transmit cycles, even with a good SWR on the
antenna."
Are you saying that you see this with beta 2.04? If so, have you tri
Given we are talking about Beta software, I think I have located another
issue with the KAT500...
If I use any sort of fast turn around transmit/receive cycle software,
like VARA, under Winlink, or ARQ type software modem, the tuner tries to
re-tune every time a most transmit cycles, even with
Thanks for the helpful suggestions about why my K2 would not go into
transmit via my Signalink and various digital programs. It turned out that
a sound setting in Windows was messed up so that audio from the computer
was not getting to the Signalink.
Took a screen shot of the setup so next time (a
Hello fellow Elecrafters,
I am completely stumped!
I have been using my K2/100 along with a SignaLink USB soundcard to do
digital programs, such as PSK31, RTTY, and FT8--all with no problems, for
years.
After downloading and installing the latest version of Ham Radio Deluxe I
now have NO ability to
"Could you note some of the ‘fixes’ that are not noted in the release notes?"
Here is a more complete list:
* An enabled antenna is not selectable with mode BYP
* F; interrogation returns zero after CAT induced band change
* Unexpected behavior for FCCS and FCMD
* Fault code 01 when attempting
9 matches
Mail list logo
