Andy:

Thanks for the update!

73,

Barry, WD4ASW/1

> On Oct 7, 2021, at 8:07 AM, Andy Durbin <a.dur...@msn.com> wrote:
> 
> "Could you note some of the ‘fixes’ that are not noted in the release notes?"
> 
> Here is a more complete list:
> 
> * An enabled antenna is not selectable with mode BYP
> 
> * F; interrogation returns zero after CAT induced band change
> 
> * Unexpected behavior for FCCS and FCMD
> 
> * Fault code 01 when attempting to tune with low power
> 
> * Fault 2 leaves KAT500 in bypass when fault cleared
> 
> * Disabling "Tune on QSY" option does not prevent RF count re-tune if CAT 
> frequency is available to KAT500.
> 
> All the above are fixed in beta 2.04.
> 
> There are also changes in full tune implementation that make is less likely 
> that TX power foldback will result in early termination with a poor match.
> 
> FCCS, FCMD, MTM and MTA commands which did not work as documented have been 
> replaced by FDT.  (See command reference for details)
> 
> For anyone using CAT control, the biggest change is that the CAT provided TX 
> frequency takes priority over the counter frequency and counter will no 
> longer cause a re-tune at start of, or during, TX. 
> 
> (All the above are based on my notes and the Elecraft release notes should be 
> taken as the official version of the changes.)
> 
> 73,
> Andy, k3wyc
> 
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to bbai...@mac.com 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to