Need the best modifications for back lighting of the K1.
This version never had the K1 LCD Backlight Kit.
Ken
Elecraft K1 nr. 260
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.ne
That makes a lot of sense, Dave. Two PTT types active at the same time
is something that never occurred to me. Except there's no PTT cable
from the SignaLink, as far as I can tell.
But Greg AB7R suggested that I update WSJT-X, which seems to have fixed
the problem. I'm still puzzled as to why
If using CAT for PTT, make sure the PTT cable from the Signallink is NOT
connected to the radio. Having two separate PTT types active at the same
time will cause behavior like you described.
On Fri, Dec 3, 2021 at 1:21 PM David Haines wrote:
> Using CAT on the PC.
>
> TEST CAT on PC turns green.
Using CAT on the PC.
TEST CAT on PC turns green.
TEST PTT on PC turns red and turns on the KX3 TX LED. It looks like if
I change to VOX the problem goes away, but I've always used CAT in the past.
Signalinnk PTT LED turns on with TX.
david
KC1DNY
On 12/3/2021 1:44 PM, Julia Tuttle wrote:
A
Are you using CAT on the PC, VOX on the SignaLink, or VOX on the KX3 for
PTT?
On Fri, Dec 3, 2021, 13:23 David Haines wrote:
> I'll send this to the group before I start taking things apart:
>
> Running KX3 with KXP100 using SignaLink on 40m. I've been using FT8
> successfully for over a year.
I'll send this to the group before I start taking things apart:
Running KX3 with KXP100 using SignaLink on 40m. I've been using FT8
successfully for over a year. Then last night something new:
When I transmit (either the TUNE button of WSJT--X or replying to a CQ)
the signal goes out succes
6 matches
Mail list logo