Re: [Elecraft] Not hearing on the sub receiver

Problem solved! Operator error Some how the "B set" was changed. Will WC2L On 2/7/2023 4:35 PM, William Liporace wrote: I have a K3S that seems to be having an issue hearing on the sub receiver. Hit A > B to make sure all settings are equal Tap the SUB button Turn the volume down on VFO-A

Re: [Elecraft] Looking For K3 Boards KDVR3 And KBPF3.

I have Kbpf3 boards, Larry k6ro www.LSRarecoins.com 310-710-2869 > On Feb 7, 2023, at 1:56 PM, Ramon Batista wrote: > > I’m Looking For K3 Boards KDVR3 And KBPF3 To Complete All Options In My > Radio. Any Information Will Be Really Appreciated, 73’s. > > Ray WD4X > 239-227-9414 >

Re: [Elecraft] Looking For K3 Boards KDVR3 And KBPF3.

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

[Elecraft] Looking For K3 Boards KDVR3 And KBPF3.

I’m Looking For K3 Boards KDVR3 And KBPF3 To Complete All Options In My Radio. Any Information Will Be Really Appreciated, 73’s. Ray WD4X 239-227-9414 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] Not hearing on the sub receiver

I have a K3S that seems to be having an issue hearing on the sub receiver. Hit A > B to make sure all settings are equal Tap the SUB button Turn the volume down on VFO-A Turn the volume up on VFO-B and there is no Audio I think I have the issue on everything above 20 meters (17, 15, 12, etc) It

[Elecraft] Excessive RF input damaged RX/TX

Hi, I posted earlier that I had accidentally gotten too much RF input into one of the K3's at the station during a contest, when an operator switched the radio to 30m where there is no BPF. D25 had broken, so I changed that and all bands except 30m work just fine. 40m has got problems sometimes

Re: [Elecraft] [Elecraft-KX] Peter Martinez And The CW-To-PSK31 Feature

On 2/7/2023 2:08 AM, Jim Brown wrote: On 2/6/2023 8:36 PM, Wayne Burdick wrote: The key idea that led to the PSK31 and RTTY decoders was this: that a ham receiver should be able to demodulate all commonly heard signals and display them on the front panel, without resorting to a computer. That

Re: [Elecraft] K3 open top

It’s on page 68 of the manual. Remove nine screws holding the top cover. Do not remove the four screws holding the speaker in place. Press the back center of the top to tilt it back and remove it, carefully disconnecting the speaker wires. 73, Adrian KJ7SOY > On Feb 7, 2023, at 4:33 AM,

[Elecraft] Mag loops and KX3 tuning

Do not use the KX3 tuner when using a mag loop. Set the tuner to bypass. A mag loop is the tuner. In order to gain resonance, adjust the mag loop's capacitor to hear maximum noise at the frequency you want to start working. Mag loops are high Q, resonant in a very narrow range of frequencies.

[Elecraft] K3 open top

Hi,  I have removed the side handle so it fits better in my desk, but noticed the two nuts inside fell and I want to take them out, so I don´t make any short.!How do I remove the top lid so I can acces to the interior.? How many screws do I need to remove.?11 from top, also some on the sides..?

Re: [Elecraft] [Elecraft-KX] Peter Martinez And The CW-To-PSK31 Feature

On 2/6/2023 8:36 PM, Wayne Burdick wrote: The key idea that led to the PSK31 and RTTY decoders was this: that a ham receiver should be able to demodulate all commonly heard signals and display them on the front panel, without resorting to a computer. That was around 2005, though. Since that

Re: [Elecraft] [Elecraft-KX] Peter Martinez And The CW-To-PSK31 Feature

When I got my K3, one of the first produced, I made a couple of RTTY and PSK contacts with the CW-to-digital feature, virtually my first non-CW QSOs since the 1980s. I think they wondered why I sent them 5NN reports, though. 73, Victor, 4X6GP Rehovot, Israel Formerly K2VCO CWops no. 5