Good Evening,
Conditions were unsettled on both bands but comms were successful.
QSB as a fast flutter, laid on top of slow QSB. There was another layer
of noise, similarly varied. During the first net it wasn't snowing
here. Then more started falling. The same storm was bringing rain
I hope the sale is pending, not the radio !!
> On Feb 26, 2023, at 1:13 PM, bht...@juno.com wrote:
>
> Thanks to everyone who was interested in my sale
> of the K3 #5024. The radio is pending.
>
> 73,
> Brian K1DIH
>
> __
>
3784 kHz (we moved to 3786 kHz this evening), 9PM ET Sunday (0200Z
Monday).
Thanks to the following check ins (w) and relays (rel):
Call State Radio Name
1 WB9JNZILFTdx101d Eric (rel),(w)
2 W9/V31KC ILExpert MB1Dennis (w)
3 K1NW RIK4D
Alan,
Moving the jumper to 1-2 doesn't change the behavior. The internal
display comes on briefly,
then the P3 powers down. I've tried it in all 3 positions, and the
behavior is the same
whenever the P3 attempts to power on.
And no, I can't contact it via the utility anymore. The most
I believe the display board was replaced... If I remember right, the
test was to look at the inside of the P3, and see if the display board
LED was flashing. If flashing, it was OK, if not, something died...
This has bee a few years ago, so my memory of this is no longer that
clear...
73,
Thanks to everyone who was interested in my sale
of the K3 #5024. The radio is pending.
73,
Brian K1DIH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
By the way, I no longer have a K3 or P3 (lost in a house fire) so this
is from memory...
> Since the internal display seems to show OK, no matter how briefly,
> I'm thinking this is not an internal display connection issue.
Agreed.
> This seems to be a power on reset issue of some sort.
Can
After some years, I decided to try using my Elecraft K2 in SSB mode.
When I key the MH2 mic, the radio stays in receive mode. If I use VOX
the radio transmits ok.
I checked with my multimeter -- when I press the PTT on the MH2, pins
2 (PTT) & 8 (GND) go short circuit. However, pins 2 & 7 (GND)
Thanks to everyone who was interested in my sale
of the K3 #5024. The radio is pending.
73,
Brian K1DIH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Please join us on 3784 kHz (NOTE THE NEW FREQUENCY), 9PM ET Sunday
(0200Z Monday).
80M has been good at that time of the evening, with strong signals and
little QRN from thunderstorms these days.
Your net control this week will be Dave, N8SBE, although I've had
intermittent antenna issues
Alan,
Before I got the chance to look into your idea of possibly bad display
connection,
I DID reload a saved configuration into the P3 using the P3 Utility, and
it restored
the high-res setting on the external display.
After power cycling (the generator quit unexpectedly due to a low oil
Dave,
Any idea of what repair action they did?
73,
-- Dave, N8SBE
On 2023-02-24 14:31, Dave (NK7Z) wrote:
Hi,
I had the exact same issue, with the exact same symptoms, sent it into
Elecraft, got it back, and it worked until I sold it.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL
12 matches
Mail list logo