On 5/22/2023 3:14 PM, Jorge Diez - CX6VM wrote:
seems is
something else
Another thing that Windoze has done more than once on an upgrade is to
change sampling rate. It SHOULD be 48 kHz Stereo. Check both recording
and playback.
73, Jim K9YC
My K3s has this problem, but it only happens intermittently. When driving
the KPA1500, there would be a spike of about 70w. Drive level was between
20 and 25 watts. The K3s spent three months at Elecraft and they could not
fix it. I finally discovered two things that caused the power spike:
N5NA has written an excellent account of replacing the small push-button
encoders.
https://www.n5na.net/s9y/index.php?/archives/26-Replacing-Elecraft-K3-Push-Button-Encoders.html
I have replaced all of these encoders in several K3 radios over the past
5 years. It is not a job for the
hello Jim
thanks for the help
I verify and both Windows and WSJT are using USB audio CODEC, so seems is
something else
thanks!
73,
Jorge
El lun, 22 may 2023 a las 16:20, Jim Brown ()
escribió:
> On 5/22/2023 9:18 AM, Jorge Diez - CX6VM wrote:
> > Any idea what is wrong?
>
> Jorge,
>
> One
The T1 specs say that it should function with input power as low as 0.5
watts. An 8 dB attenuator at the output of your 4-5 watt QRP rig should
still give you close to 0.5 watt into the T1, and the attenuator acts as
a buffer that diminishes the reflected power from the high SWR load.
Tune
On 5/22/2023 9:18 AM, Jorge Diez - CX6VM wrote:
Any idea what is wrong?
Jorge,
One thing with symptoms like this that has happened to me several times
is that when things are shifted around, Windows will choose the mic
built into my laptop to feed WSJT-X or JTDX. If that's the problem, the
I have a T1 that I have used for several years. I recently purchased a
QCX-mini, and an SW-3B. I normally use my K2, KX2 or KX3 for portable
operations, but occasionally I like to use something different for QRP CW.
Both the QCX-mini and the SW-3B require a 2.0 or less SWR. The
documentation
hello
I have a remote setup, K3/100 at the station, K3/o mini at home, TASCAM
US-125M for digital
Usually I have TASCAM LINE know at the second line level (it have 9 lines
levels) and K3 AF knob at the second point level
I needed to disconnect all the equipments last week. Then assembled all in
Went really fast. Obviously, I should have priced it higher ;^)
--
73, Pete N4ZR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
At the CWOps dinner in Dayton, I won an Elecraft AX1 multiband portable
whip antenna with the 40M extender, bipod and tripod adapter - all
together costing $227 from Elecraft.
Since the chances of my operating SOTA or POTA are somewhere between
zero and some imaginary number, I'm offering the
Hello YLs and Oms,
I am still struggling with my K3 and the ERR DSE.
In rare cases I can switch on K3 completely and it runs stable.
That let me assume, that the startup of µC, e.g. DSP, is not working
correctly.
Do you have any further hints to find out where the issue is located?
11 matches
Mail list logo