Good Evening,
Twenty meters had moderate QSB with one distant storm. On forty
meters there were more, closer storms. Static crashes wiped out letters
now and then. 40 had less QSB with weaker signals. It felt good to
listen to silence after the net.
On 14050.5 kHz at 2200z:
W0CZ -
On 7/30/2023 4:40 PM, Oscar Staudt wrote:
I attempted to get 3-5 bars of ALC by turning up the mic gain control. Even
with the gain up to 80, I’d have to speak*very* loudly to just get a
flicker on the ALC meter.
Do the headphones work? Are you sure that the mic is plugged all the
way into
3784 kHz 9PM ET Sunday (0100Z Monday).
Thanks to the following check ins (w) and relays (rel):
Call State Radio/AmpName
1 N8SBE MI K4D/KPA500 Dave (w),(op)
2 N9QDS IL K4D/KPA500 Keith (w)
3 W8LVN IL K3s Bill (rel),(w)
4 WB9JNZIL FT101dx/KPA1500
Actually, I had (have) this very same problem and brought it up on here quite
some time ago. CM-500, mic and phones plugged into proper jacks on rear,
preamp on, bias on, mic gain at max, mic right at my lips, and I still have to
talk very loudly to get any response out of the ALC meter. I
On 7/30/2023 7:40 PM, Oscar Staudt wrote:
When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
headphones from my K3, and plugged them into the back of my K4. I set the
mic input to rear, and mic bias on. I expected the mic to perform
like it had in the K3.
I attempted to get
This may sound like a silly question, but are you sure you have the plugs in
the right way round? i.e. Not swapped over.
AFAIK this problem has not been reported on the K4 reflector and I know other
folks are using them.
73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700
When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
headphones from my K3, and plugged them into the back of my K4. I set the
mic input to rear, and mic bias on. I expected the mic to perform
like it had in the K3.
I attempted to get 3-5 bars of ALC by turning up the mic gain
Please join us on 3784 kHz (NOTE THE NEW FREQUENCY), 9PM ET Sunday
(0100Z Monday). Note that the net stays on the same local time, when we
switch back and forth to/from Daylight time, so the UTC time changes,
but not the local time.
Now that we have moved into Daylight time and have longer
Well...I'm blessed to live in a region with No* lightening activity, so
generally have ignored doing all the preventative work.
*We hear thunder about once every 4-5 years and see lightening even less
often.
But winter wind brings static build-up on exposed metal (antennas and
wires) so
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
> I disagree. Reflectors are the ideal place to discuss and learn, although
> strictly speaking it might be better to use a reflector dedicated to the
> subject.
>
> Anecdotal evidence can be extremely useful, even if it treads on someone
> else’s toes.
>
> Using a single source and taking
I am hoping I can find out a problem I have with my KXPA100 amp and
KXAT100. The "on" LED
is flashing every 4 seconds. Also when connected to the KX3 the menu
item ATU DATA is replaced
by 2 horizontal bars and a beep tone. Disconnect the PA and the KX3
shows the correct menu item.
I have
12 matches
Mail list logo