Terry,
You only need to connect a TMP cable to J92 on the KRX3 if you want to use
an auxiliary input for the KRX3 ( either via the BNC connector that comes
with the KRX3 or via the KAT3 antenna terminal that is not being used for
the main RX and TX, you can use only one of these options ). If you
Unfortunately, propogation to the west coast was almost non existent. Heard a
few stations but unable to be heard.
Al
WB6HPF
K3 974
Phil and Christina wrote:
>
>
> We held the SSB net this morning (1800Z on 14316 kHz). There were 16 of
> us
> in total (3 more than last week) over about 30 m
Two weeks ago I assembled my K3 ( serial 974 ) having waited until I received
both my KRX3 and KDVR3 since I didn't want to have to keep removing and
replacing the front panel to install each of them. I installed the KRX3
auxiliary DSP board on the main DSP board during the initial build as
specif
Do you have Config:Tech MD turned ON ?. It's necessary for it to be on ( a
small bug in this version of the utility which will be fixed in the next
release )
73
Al
WB6HPF
Cady, Fred wrote:
>
> Hi all,
> Have installed (and re-installed) firmware version 2.76 and the new K3
> utility to do the
Dave,
I have Serial #974 and received an E Mail from La Vonna (
account...@elecraft.com ) yesterday that my KDVR would be shipping within
the next 2 weeks. You might want to check & see if they sent you an E Mail
and didn't get a confirmation E mail back from you.
73
Al
WB6HPF
David and Dian
Method 3 isn't implemented in firmware yet. Use Method 2.
Al
WB6HPF
Ed White WA3BZT wrote:
>
> Hi Gang:
> Need help insetting up the TCXO 1ppm oscillator.
> I was trying to get Method 3 to work in setting up the oscillator.
> I can get to the menu CONFIG:REF CAL but when I tap 1 I do not get
Option 3 is NOT yet implemented in the firmware. You'll need to use Option 1
or 2.
Al
WB6HPF
John Ronan wrote:
>
> Evening,
>
> It arrived Friday, opened the box, and nearly died of fright looking
> at all the little (and not so little packages). Weather wasn't great
> over the weekend, s
Jeff Maass wrote:
>
>
> Please continue to post when your backordered KRX3 (2nd receiver) arrives,
> along with your
> order date and/or K3 serial number associated with the order!
>
> I was hoping to have the KRX3 in my K3 (#1152, ordered 2/7/08) in time to
> take it with me
> for use at PJ2
Dick Grolleman wrote:
>
> Anybody received an Katiegram for the KRX3 in the 1100serie yet? Would be
> nice to have it for the upcomming contests
>
> 73 de Dick
>
> K3 1168
> ___
> Elecraft mailing list
> Post to: Elecraft@mailman.qth.net
> You must
Have you enabled Mic Bias in the Config Menu ?.
Henrik Tuxen wrote:
>
> Hej all, here is the plot info for SN 1570
> Orderdate 28 APR 2008
> Katiegram 26 AUG 2008
> Arrival in DK 29 AUG 2008 @ 10:30 Local time
> First power 29 AUG 2008 @ 21:30 Local time
>
> Absolutely no pro
I downloaded the zip file and unzipped it both with Stuffit Expander and with
the terminal method and got a .jar file I could double click. However,
double clicking on it only brings up a blank purple window with the title
info. There are no info boxes or any other way to access the program. I
che
Possibly a stupid question, but have you enabled the KAT3 by turning power
off and back on after setting ATU to byp in config mode ?.
Al WB6HPF
Mike Fatchett W0MU wrote:
>
> I have my kit built but it does not seem to see the KAT3. I have tried
> the
> byp and auto setting in config. When I p
Per an earlier post by Greg AB7R, try to calibrate on one of the 60 Meter
channels such as 5403.5 kHz.
Al
WB6HPF
Michael E. Dobson wrote:
>
> I've run into a minor glitch in the assembly of K3 #379. I made it
> up to the point of doing the 5W Transmitter Gain calibration without
> a problem
I have the following items for Sale
K2/100 with KSB2 and MH2 Mic Serial # 352X. Checked & aligned by Gary
Surrency of Elecraft in June 2003. He commented that the construction was
excellent. Radio was my backup K2 and has been in the box ever since I got
it from the original owner in July 2003. $
14 matches
Mail list logo